Add MMC platform data.
While at it also fix trivial checkpatch.pl issues.
Signed-off-by: Marcel Ziswiler marcel@ziswiler.com
---
board/toradex/colibri_pxa270/colibri_pxa270.c | 20 ++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/board/toradex/colibri_pxa270/colibri_pxa270.c b/board/toradex/colibri_pxa270/colibri_pxa270.c index e9e17508a5..507bf579cf 100644 --- a/board/toradex/colibri_pxa270/colibri_pxa270.c +++ b/board/toradex/colibri_pxa270/colibri_pxa270.c @@ -3,7 +3,7 @@ * Toradex Colibri PXA270 Support * * Copyright (C) 2010 Marek Vasut marek.vasut@gmail.com - * Copyright (C) 2016 Marcel Ziswiler marcel.ziswiler@toradex.com + * Copyright (C) 2016-2019 Marcel Ziswiler marcel.ziswiler@toradex.com */
#include <common.h> @@ -14,6 +14,7 @@ #include <asm/arch/regs-uart.h> #include <asm/io.h> #include <dm/platdata.h> +#include <dm/platform_data/pxa_mmc_gen.h> #include <dm/platform_data/serial_pxa.h> #include <netdev.h> #include <serial.h> @@ -32,7 +33,7 @@ int board_init(void) /* arch number of Toradex Colibri PXA270 */ gd->bd->bi_arch_number = MACH_TYPE_COLIBRI;
- /* adress of boot parameters */ + /* address of boot parameters */ gd->bd->bi_boot_params = 0xa0000100;
return 0; @@ -82,7 +83,7 @@ int board_usb_init(int index, enum usb_init_type init) writel(readl(UHCRHDA) | 0x100, UHCRHDA);
/* Set port power control mask bits, only 3 ports. */ - writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB); + writel(readl(UHCRHDB) | (0x7 << 17), UHCRHDB);
/* enable port 2 */ writel(readl(UP2OCR) | UP2OCR_HXOE | UP2OCR_HXS | @@ -106,8 +107,6 @@ void usb_board_stop(void) udelay(10);
writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN); - - return; } #endif
@@ -119,11 +118,22 @@ int board_eth_init(bd_t *bis) #endif
#ifdef CONFIG_CMD_MMC +#if !CONFIG_IS_ENABLED(DM_MMC) int board_mmc_init(bd_t *bis) { pxa_mmc_register(0); return 0; } +#else /* !CONFIG_IS_ENABLED(DM_MMC) */ +static const struct pxa_mmc_plat mmc_platdata = { + .base = (struct pxa_mmc_regs *)MMC0_BASE, +}; + +U_BOOT_DEVICE(pxa_mmcs) = { + .name = "pxa_mmc", + .platdata = &mmc_platdata, +}; +#endif /* !CONFIG_IS_ENABLED(DM_MMC) */ #endif
static const struct pxa_serial_platdata serial_platdata = {