On Thu, 9 Apr 2009 05:32:29 -0700 (PDT) rudresh rudresh.tk@lntemsys.com wrote:
Hi All,
I am try to use the u-boot version 2009 for MPC8313ERB broad, when i load the u-boot.bin to board using JTAG and restart the board at that time its not booting properly . its generated following error what may be the problem.
U-Boot 2009.03 (Apr 22 2009 - 04:59:44) MPC83XX
Reset Status: Software Hard, External/Internal Soft, External/Internal Hard
CPU: e300c3, MPC8313E, Rev: 1.0 at 333.333 MHz, CSB: 166.667 MHz Board: Freescale MPC8313ERDB I2C: ready DRAM: 128 MB FLASH: 16 MB NAND: 256 MiB *** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Machine check in kernel mode. Caused by (from msr): regs 07f36df0 Unknown values in msr NIP: 07FE9474 XER: 00000000 LR: 07FE946C REGS: 07f36df0 TRAP: 0200 DAR: 00000000
can you turn on debugging and/or somehow find out what code is at or around the NIP address above?
Also, how, if any, is this board different from Freescale's MPC8313ERDB? earlier you state it is a custom board...
Kim