-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot- bounces@lists.denx.de] On Behalf Of Steven McGrath Sent: 11 July 2012 01:28 To: Jason; u-boot@lists.denx.de Subject: Re: [U-Boot] Dreamplug v10 uboot
I have everything working via openocd I compiled a U-Boot for Dreamplug on a Raspberry Pi and noticed that it isn't configured to support the V10 Dreamplugs. I'm compiling another version as we speak for the guru plug board and will report back on that one.
The V10s don't have SPI/NOR flash anymore, they have 512MB NAND and I think this is causing all of the problems.
May be, modifying the board configuration for this change and mpp settings to use NAND interface may help to bring this board up. So you need to build the code.
Regards... Prafulla . . .