Used BIT macro like 1 << nr as BIT(nr) where nr is 0...n
Cc: Bin Meng bmeng.cn@gmail.com Signed-off-by: Jagan Teki jteki@openedev.com --- drivers/mtd/spi/sf_internal.h | 42 +++++++++++++++++++++--------------------- 1 file changed, 21 insertions(+), 21 deletions(-)
diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h index 0fa3abb..561abc3 100644 --- a/drivers/mtd/spi/sf_internal.h +++ b/drivers/mtd/spi/sf_internal.h @@ -16,18 +16,18 @@ /* Dual SPI flash memories - see SPI_COMM_DUAL_... */ enum spi_dual_flash { SF_SINGLE_FLASH = 0, - SF_DUAL_STACKED_FLASH = 1 << 0, - SF_DUAL_PARALLEL_FLASH = 1 << 1, + SF_DUAL_STACKED_FLASH = BIT(0), + SF_DUAL_PARALLEL_FLASH = BIT(1), };
/* Enum list - Full read commands */ enum spi_read_cmds { - ARRAY_SLOW = 1 << 0, - ARRAY_FAST = 1 << 1, - DUAL_OUTPUT_FAST = 1 << 2, - DUAL_IO_FAST = 1 << 3, - QUAD_OUTPUT_FAST = 1 << 4, - QUAD_IO_FAST = 1 << 5, + ARRAY_SLOW = BIT(0), + ARRAY_FAST = BIT(1), + DUAL_OUTPUT_FAST = BIT(2), + DUAL_IO_FAST = BIT(3), + QUAD_OUTPUT_FAST = BIT(4), + QUAD_IO_FAST = BIT(5), };
/* Normal - Extended - Full command set */ @@ -37,20 +37,20 @@ enum spi_read_cmds {
/* sf param flags */ enum { -#ifdef CONFIG_SPI_FLASH_USE_4K_SECTORS - SECT_4K = 1 << 0, +#ifndef CONFIG_SPI_FLASH_USE_4K_SECTORS + SECT_4K = 0, #else - SECT_4K = 0 << 0, + SECT_4K = BIT(0), #endif - SECT_32K = 1 << 1, - E_FSR = 1 << 2, - SST_WR = 1 << 3, - WR_QPP = 1 << 4, + SECT_32K = BIT(1), + E_FSR = BIT(2), + SST_WR = BIT(3), + WR_QPP = BIT(4), };
enum spi_nor_option_flags { - SNOR_F_SST_WR = (1 << 0), - SNOR_F_USE_FSR = (1 << 1), + SNOR_F_SST_WR = BIT(0), + SNOR_F_USE_FSR = BIT(1), };
#define SPI_FLASH_3B_ADDR_LEN 3 @@ -100,10 +100,10 @@ enum spi_nor_option_flags { #endif
/* Common status */ -#define STATUS_WIP (1 << 0) -#define STATUS_QEB_WINSPAN (1 << 1) -#define STATUS_QEB_MXIC (1 << 6) -#define STATUS_PEC (1 << 7) +#define STATUS_WIP BIT(0) +#define STATUS_QEB_WINSPAN BIT(1) +#define STATUS_QEB_MXIC BIT(6) +#define STATUS_PEC BIT(7) #define SR_BP0 BIT(2) /* Block protect 0 */ #define SR_BP1 BIT(3) /* Block protect 1 */ #define SR_BP2 BIT(4) /* Block protect 2 */