Hi,
The series is based on Tero's omap4 panda and omap5 uevm device model conversion patches.
To avoid removal of the SDP4430 due to neglect. With these patches applied no more complaints about DM_SPL conversion and the board boots up Linux. We never had ethernet support for spd4430 in mainline (ks8851 on spi bus), this is still the case.
Linux boots up, but for some reason ethernet is not responsible, that needs to be investigated, unlikely caused by u-boot.
I really like to keep sdp4430/Blaze support as it is the platform where I can test DMIC and other audio features of McPDM/twl6040. The board also have dual LCD, which is a nice thing to have.
Regards, Peter --- Peter Ujfalusi (2): omap4: Copy device tree from Linux 5.7.y for SDP4430 omap4: sdp: convert to device model
arch/arm/dts/Makefile | 4 + arch/arm/dts/omap4-sdp-es23plus.dts | 14 + arch/arm/dts/omap4-sdp.dts | 713 ++++++++++++++++++++++++++++ board/ti/sdp4430/sdp.c | 12 + configs/omap4_sdp4430_defconfig | 8 + 5 files changed, 751 insertions(+) create mode 100644 arch/arm/dts/omap4-sdp-es23plus.dts create mode 100644 arch/arm/dts/omap4-sdp.dts