This patch adds some BSP commands and FPGA booting support for esd's PMC440 boards.
Signed-off-by: Matthias Fuchs matthias.fuchs@esd-electronics.com --- board/esd/pmc440/cmd_pmc440.c | 559 ++++++++++++++++++++++++++++++++++ board/esd/pmc440/fpga.c | 471 ++++++++++++++++++++++++++++ board/{gen860t => esd/pmc440}/fpga.h | 20 +- 3 files changed, 1041 insertions(+), 9 deletions(-) create mode 100644 board/esd/pmc440/cmd_pmc440.c create mode 100644 board/esd/pmc440/fpga.c copy board/{gen860t => esd/pmc440}/fpga.h (71%)
diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440/cmd_pmc440.c new file mode 100644 index 0000000..c0cd9e2 --- /dev/null +++ b/board/esd/pmc440/cmd_pmc440.c @@ -0,0 +1,559 @@ +/* + * (C) Copyright 2007 + * Matthias Fuchs, esd Gmbh, matthias.fuchs@esd-electronics.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <common.h> +#include <command.h> +#include <asm/io.h> +#include <asm/cache.h> +#include <asm/processor.h> + +#include "pmc440.h" + +int is_monarch(void); +int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); +int eeprom_write_enable(unsigned dev_addr, int state); + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_CMD_BSP + +static int got_fifoirq; +static int got_hcirq; + +int fpga_interrupt(u32 arg) +{ + pmc440_fpga_t *fpga = (pmc440_fpga_t *)arg; + int rc = -1; /* not for us */ + u32 status = FPGA_IN32(&fpga->status); + + /* check for interrupt from fifo module */ + if (status & STATUS_FIFO_ISF) { + /* disable this int source */ + FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_FIFOIE_GATE); + rc = 0; + got_fifoirq = 1; /* trigger backend */ + } + + if (status & STATUS_HOST_ISF) { + FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_HCINT_GATE); + rc = 0; + got_hcirq = 1; + } + + return rc; +} + + +int do_waithci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA; + + got_hcirq = 0; + + FPGA_CLRBITS(&fpga->ctrla, CTRL_HOST_IE); + FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_HCINT_GATE); + + irq_install_handler(IRQ0_FPGA, + (interrupt_handler_t *)fpga_interrupt, + fpga); + + FPGA_SETBITS(&fpga->ctrla, CTRL_HOST_IE); + + while (!got_hcirq) { + /* Abort if ctrl-c was pressed */ + if (ctrlc()) { + puts("\nAbort\n"); + break; + } + } + if (got_hcirq) + printf("Got interrupt!\n"); + + FPGA_CLRBITS(&fpga->ctrla, CTRL_HOST_IE); + irq_free_handler(IRQ0_FPGA); + return 0; +} +U_BOOT_CMD( + waithci, 1, 1, do_waithci, + "waithci - Wait for host control interrupt\n", + NULL + ); + + +void dump_fifo(pmc440_fpga_t *fpga, int f, int *n) +{ + u32 ctrl; + + while (!((ctrl = FPGA_IN32(&fpga->fifo[f].ctrl)) & FIFO_EMPTY)) { + printf("%5d %d %3d %08x", + (*n)++, f, ctrl & (FIFO_LEVEL_MASK | FIFO_FULL), + FPGA_IN32(&fpga->fifo[f].data)); + if (ctrl & FIFO_OVERFLOW) { + printf(" OVERFLOW\n"); + FPGA_CLRBITS(&fpga->fifo[f].ctrl, FIFO_OVERFLOW); + } else + printf("\n"); + } +} + + +int do_fifo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA; + int i; + int n = 0; + u32 ctrl, data, f; + char str[] = "\|/-"; + int abort = 0; + int count = 0; + int count2 = 0; + + switch (argc) { + case 1: + /* print all fifos status information */ + printf("fifo level status\n"); + printf("______________________________\n"); + for (i=0; i<FIFO_COUNT; i++) { + ctrl = FPGA_IN32(&fpga->fifo[i].ctrl); + printf(" %d %3d %s%s%s %s\n", + i, ctrl & (FIFO_LEVEL_MASK | FIFO_FULL), + ctrl & FIFO_FULL ? "FULL " : "", + ctrl & FIFO_EMPTY ? "EMPTY " : "", + ctrl & (FIFO_FULL|FIFO_EMPTY) ? "" : "NOT EMPTY", + ctrl & FIFO_OVERFLOW ? "OVERFLOW" : ""); + } + break; + + case 2: + /* completely read out fifo 'n' */ + if (!strcmp(argv[1],"read")) { + printf(" # fifo level data\n"); + printf("______________________________\n"); + + for (i=0; i<FIFO_COUNT; i++) + dump_fifo(fpga, i, &n); + + } else if (!strcmp(argv[1],"wait")) { + got_fifoirq = 0; + + irq_install_handler(IRQ0_FPGA, + (interrupt_handler_t *)fpga_interrupt, + fpga); + + printf(" # fifo level data\n"); + printf("______________________________\n"); + + /* enable all fifo interrupts */ + FPGA_OUT32(&fpga->hostctrl, + HOSTCTRL_FIFOIE_GATE | HOSTCTRL_FIFOIE_FLAG); + for (i=0; i<FIFO_COUNT; i++) { + /* enable interrupts from all fifos */ + FPGA_SETBITS(&fpga->fifo[i].ctrl, FIFO_IE); + } + + while (1) { + /* wait loop */ + while (!got_fifoirq) { + count++; + if (!(count % 100)) { + count2++; + putc(0x08); /* backspace */ + putc(str[count2 % 4]); + } + + /* Abort if ctrl-c was pressed */ + if ((abort = ctrlc())) { + puts("\nAbort\n"); + break; + } + udelay(1000); + } + if (abort) + break; + + /* simple fifo backend */ + if (got_fifoirq) { + for (i=0; i<FIFO_COUNT; i++) + dump_fifo(fpga, i, &n); + + got_fifoirq = 0; + /* unmask global fifo irq */ + FPGA_OUT32(&fpga->hostctrl, + HOSTCTRL_FIFOIE_GATE | HOSTCTRL_FIFOIE_FLAG); + } + } + + /* disable all fifo interrupts */ + FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_FIFOIE_GATE); + for (i=0; i<FIFO_COUNT; i++) + FPGA_CLRBITS(&fpga->fifo[i].ctrl, FIFO_IE); + + irq_free_handler(IRQ0_FPGA); + + } else { + printf("Usage:\nfifo %s\n", cmdtp->help); + return 1; + } + break; + + case 4: + case 5: + if (!strcmp(argv[1],"write")) { + /* get fifo number or fifo address */ + f = simple_strtoul(argv[2], NULL, 16); + + /* data paramter */ + data = simple_strtoul(argv[3], NULL, 16); + + /* get optional count parameter */ + n = 1; + if (argc >= 5) + n = (int)simple_strtoul(argv[4], NULL, 10); + + if (f < FIFO_COUNT) { + printf("writing %d x %08x to fifo %d\n", + n, data, f); + for (i=0; i<n; i++) + FPGA_OUT32(&fpga->fifo[f].data, data); + } else { + printf("writing %d x %08x to fifo port at address %08x\n", + n, data, f); + for (i=0; i<n; i++) + out32(f, data); + } + } else { + printf("Usage:\nfifo %s\n", cmdtp->help); + return 1; + } + break; + + default: + printf("Usage:\nfifo %s\n", cmdtp->help); + return 1; + } + return 0; +} +U_BOOT_CMD( + fifo, 5, 1, do_fifo, + "fifo - Fifo module operations\n", + "wait\nfifo read\n" + "fifo write fifo(0..3) data [cnt=1]\n" + "fifo write address(>=4) data [cnt=1]\n" + " - without arguments: print all fifo's status\n" + " - with 'wait' argument: interrupt driven read from all fifos\n" + " - with 'read' argument: read current contents from all fifos\n" + " - with 'write' argument: write 'data' 'cnt' times to 'fifo' or 'address'\n" + ); + + +int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + ulong sdsdp[5]; + ulong delay; + int count=16; + + if (argc < 2) { + printf("Usage:\nsbe %s\n", cmdtp->help); + return -1; + } + + if (argc > 1) { + if (!strcmp(argv[1], "400")) { + /* PLB=133MHz, PLB/PCI=4 */ + printf("Bootstrapping for 400MHz\n"); + sdsdp[0]=0x8678624e; + sdsdp[1]=0x0947a030; + sdsdp[2]=0x40082350; + sdsdp[3]=0x0d050000; + } else if (!strcmp(argv[1], "533")) { + /* PLB=133MHz, PLB/PCI=3 */ + printf("Bootstrapping for 533MHz\n"); + sdsdp[0]=0x87788252; + sdsdp[1]=0x095fa030; + sdsdp[2]=0x40082350; + sdsdp[3]=0x0d050000; + } else if (!strcmp(argv[1], "667")) { + /* PLB=133MHz, PLB/PCI=4 */ + printf("Bootstrapping for 667MHz\n"); + sdsdp[0]=0x8778a256; + sdsdp[1]=0x0947a030; + sdsdp[2]=0x40082350; + sdsdp[3]=0x0d050000; + } else if (!strcmp(argv[1], "test")) { + /* TODO: this will replace the 667 MHz config above. + * But it needs some more testing on a real 667 MHz CPU. + */ + printf("Bootstrapping for test (667MHz PLB=133PLB PLB/PCI=3)\n"); + sdsdp[0]=0x8778a256; + sdsdp[1]=0x095fa030; + sdsdp[2]=0x40082350; + sdsdp[3]=0x0d050000; + } else { + printf("Usage:\nsbe %s\n", cmdtp->help); + return -1; + } + } + + if (argc > 2) { + sdsdp[4] = 0; + if (argv[2][0]=='1') + sdsdp[4]=0x19750100; + else if (argv[2][0]=='0') + sdsdp[4]=0x19750000; + if (sdsdp[4]) + count += 4; + } + + if (argc > 3) { + delay = simple_strtoul(argv[3], NULL, 10); + if (delay > 20) + delay = 20; + sdsdp[4] |= delay; + } + + printf("Writing boot EEPROM ...\n"); + if (bootstrap_eeprom_write(CFG_I2C_BOOT_EEPROM_ADDR, + 0, (uchar*)sdsdp, count) != 0) + printf("bootstrap_eeprom_write failed\n"); + else + printf("done (dump via 'i2c md 52 0.1 14')\n"); + + return 0; +} +U_BOOT_CMD( + sbe, 4, 0, do_setup_bootstrap_eeprom, + "sbe - setup bootstrap eeprom\n", + "cpufreq:400|533|667 [console-uart:0|1 [<bringup delay (0..20s)>]]" + ); + + +#ifdef CONFIG_PRAM +#include <environment.h> +extern env_t *env_ptr; + +int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + DECLARE_GLOBAL_DATA_PTR; + u32 memsize; + u32 pram, env_base; + char *v; + u32 param; + ulong *lptr; + + memsize = gd->bd->bi_memsize; + + v = getenv("pram"); + if (v) + pram = simple_strtoul(v, NULL, 10); + else { + printf("Error: pram undefined. Please define pram in KiB\n"); + return 1; + } + + param = memsize - (pram << 10); + printf("PARAM: @%08x\n", param); + + memset((void*)param, 0, (pram << 10)); + env_base = memsize - 4096 - ((CFG_ENV_SIZE + 4096) & ~(4096-1)); + memcpy((void*)env_base, env_ptr, CFG_ENV_SIZE); + + lptr = (ulong*)memsize; + *(--lptr) = CFG_ENV_SIZE; + *(--lptr) = memsize - env_base; + *(--lptr) = crc32(0, (void*)(memsize - 0x08), 0x08); + *(--lptr) = 0; + + /* make sure data can be accessed through PCI */ + flush_dcache_range(param, param + (pram << 10) - 1); + return 0; +} +U_BOOT_CMD( + painit, 1, 1, do_painit, + "painit - prepare PciAccess system\n", + NULL + ); +#endif /* CONFIG_PRAM */ + + +int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + if (argc > 1) { + if (argv[1][0] == '0') { + /* assert */ + printf("self-reset# asserted\n"); + out_be32((void*)GPIO0_TCR, + in_be32((void*)GPIO0_TCR) | GPIO0_SELF_RST); + } else { + /* deassert */ + printf("self-reset# deasserted\n"); + out_be32((void*)GPIO0_TCR, + in_be32((void*)GPIO0_TCR) & ~GPIO0_SELF_RST); + } + } else { + printf("self-reset# is %s\n", + in_be32((void*)GPIO0_TCR) & GPIO0_SELF_RST ? + "active" : "inactive"); + } + + return 0; +} +U_BOOT_CMD( + selfreset, 2, 1, do_selfreset, + "selfreset- assert self-reset# signal\n", + NULL + ); + + +int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA; + + /* requiers bootet FPGA and PLD_IOEN_N active */ + if (in_be32((void*)GPIO1_OR) & GPIO1_IOEN_N) { + printf("Error: resetout requires a bootet FPGA\n"); + return -1; + } + + if (argc > 1) { + if (argv[1][0] == '0') { + /* assert */ + printf("PMC-RESETOUT# asserted\n"); + FPGA_OUT32(&fpga->hostctrl, + HOSTCTRL_PMCRSTOUT_GATE); + } else { + /* deassert */ + printf("PMC-RESETOUT# deasserted\n"); + FPGA_OUT32(&fpga->hostctrl, + HOSTCTRL_PMCRSTOUT_GATE | HOSTCTRL_PMCRSTOUT_FLAG); + } + } else { + printf("PMC-RESETOUT# is %s\n", + FPGA_IN32(&fpga->hostctrl) & HOSTCTRL_PMCRSTOUT_FLAG ? + "inactive" : "active"); + } + + return 0; +} +U_BOOT_CMD( + resetout, 2, 1, do_resetout, + "resetout - assert PMC-RESETOUT# signal\n", + NULL + ); + + +int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + if (is_monarch()) { + printf("This command is only supported in non-monarch mode\n"); + return -1; + } + + if (argc > 1) { + if (argv[1][0] == '0') { + /* assert */ + printf("inta# asserted\n"); + out_be32((void*)GPIO1_TCR, + in_be32((void*)GPIO1_TCR) | GPIO1_INTA_FAKE); + } else { + /* deassert */ + printf("inta# deasserted\n"); + out_be32((void*)GPIO1_TCR, + in_be32((void*)GPIO1_TCR) & ~GPIO1_INTA_FAKE); + } + } else { + printf("inta# is %s\n", in_be32((void*)GPIO1_TCR) & GPIO1_INTA_FAKE ? "active" : "inactive"); + } + return 0; +} +U_BOOT_CMD( + inta, 2, 1, do_inta, + "inta - Assert/Deassert or query INTA# state in non-monarch mode\n", + NULL + ); + + +/* test-only */ +int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + ulong pciaddr; + + if (argc > 1) { + pciaddr = simple_strtoul(argv[1], NULL, 16); + + pciaddr &= 0xf0000000; + + /* map PCI address at 0xc0000000 in PLB space */ + out32r(PCIX0_PMM1MA, 0x00000000); /* PMM1 Mask/Attribute - disabled b4 setting */ + out32r(PCIX0_PMM1LA, 0xc0000000); /* PMM1 Local Address */ + out32r(PCIX0_PMM1PCILA, pciaddr); /* PMM1 PCI Low Address */ + out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM1 PCI High Address */ + out32r(PCIX0_PMM1MA, 0xf0000001); /* 256MB + No prefetching, and enable region */ + } else { + printf("Usage:\npmm %s\n", cmdtp->help); + } + return 0; +} +U_BOOT_CMD( + pmm, 2, 1, do_pmm, + "pmm - Setup pmm[1] registers\n", + "<pciaddr> (pciaddr will be aligned to 256MB)\n" + ); + +#if defined(CFG_EEPROM_WREN) +int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int query = argc == 1; + int state = 0; + + if (query) { + /* Query write access state. */ + state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, -1); + if (state < 0) { + puts("Query of write access state failed.\n"); + } else { + printf("Write access for device 0x%0x is %sabled.\n", + CFG_I2C_EEPROM_ADDR, state ? "en" : "dis"); + state = 0; + } + } else { + if ('0' == argv[1][0]) { + /* Disable write access. */ + state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 0); + } else { + /* Enable write access. */ + state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 1); + } + if (state < 0) { + puts("Setup of write access state failed.\n"); + } + } + + return state; +} +U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, + "eepwren - Enable / disable / query EEPROM write access\n", + NULL); +#endif /* #if defined(CFG_EEPROM_WREN) */ + +#endif /* CONFIG_CMD_BSP */ diff --git a/board/esd/pmc440/fpga.c b/board/esd/pmc440/fpga.c new file mode 100644 index 0000000..339e5fa --- /dev/null +++ b/board/esd/pmc440/fpga.c @@ -0,0 +1,471 @@ +/* + * (C) Copyright 2007 + * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <spartan2.h> +#include <spartan3.h> +#include <command.h> +#include "fpga.h" +#include "pmc440.h" + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_FPGA + +#if 0 +#define PMC440_FPGA_DEBUG +#endif + +#ifdef PMC440_FPGA_DEBUG +#define PRINTF(fmt,args...) printf (fmt ,##args) +#else +#define PRINTF(fmt,args...) +#endif + +#define USE_SP_CODE + +#ifdef USE_SP_CODE +Xilinx_Spartan3_Slave_Parallel_fns pmc440_fpga_fns = { + fpga_pre_config_fn, + fpga_pgm_fn, + fpga_init_fn, + NULL, /* err */ + fpga_done_fn, + fpga_clk_fn, + fpga_cs_fn, + fpga_wr_fn, + NULL, /* rdata */ + fpga_wdata_fn, + fpga_busy_fn, + fpga_abort_fn, + fpga_post_config_fn, +}; +#else +Xilinx_Spartan3_Slave_Serial_fns pmc440_fpga_fns = { + fpga_pre_config_fn, + fpga_pgm_fn, + fpga_clk_fn, + fpga_init_fn, + fpga_done_fn, + fpga_wr_fn, + fpga_post_config_fn, +}; +#endif + +Xilinx_Spartan2_Slave_Serial_fns ngcc_fpga_fns = { + ngcc_fpga_pre_config_fn, + ngcc_fpga_pgm_fn, + ngcc_fpga_clk_fn, + ngcc_fpga_init_fn, + ngcc_fpga_done_fn, + ngcc_fpga_wr_fn, + ngcc_fpga_post_config_fn +}; + +Xilinx_desc fpga[CONFIG_FPGA_COUNT] = { + XILINX_XC3S1200E_DESC( +#ifdef USE_SP_CODE + slave_parallel, +#else + slave_serial, +#endif + (void *)&pmc440_fpga_fns, + 0), + XILINX_XC2S200_DESC( + slave_serial, + (void *)&ngcc_fpga_fns, + 0) +}; + + +/* + * Set the active-low FPGA reset signal. + */ +void fpga_reset(int assert) +{ + PRINTF("%s:%d: RESET ", __FUNCTION__, __LINE__); + if (assert) { + out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_FPGA_DATA); + PRINTF("asserted\n"); + } else { + out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_FPGA_DATA); + PRINTF("deasserted\n"); + } +} + + +/* + * Initialize the SelectMap interface. We assume that the mode and the + * initial state of all of the port pins have already been set! + */ +void fpga_serialslave_init(void) +{ + PRINTF ("%s:%d: Initialize serial slave interface\n", __FUNCTION__, + __LINE__); + fpga_pgm_fn(FALSE, FALSE, 0); /* make sure program pin is inactive */ +} + + +/* + * Set the FPGA's active-low SelectMap program line to the specified level + */ +int fpga_pgm_fn(int assert, int flush, int cookie) +{ + PRINTF("%s:%d: FPGA PROGRAM ", + __FUNCTION__, __LINE__); + + if (assert) { + out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_FPGA_PRG); + PRINTF("asserted\n"); + } else { + out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_FPGA_PRG); + PRINTF("deasserted\n"); + } + return assert; +} + + +/* + * Test the state of the active-low FPGA INIT line. Return 1 on INIT + * asserted (low). + */ +int fpga_init_fn(int cookie) +{ + if (in_be32((void*)GPIO1_IR) & GPIO1_FPGA_INIT) + return 0; + else + return 1; +} + +#ifdef USE_SP_CODE +int fpga_abort_fn(int cookie) +{ + return 0; +} + + +int fpga_cs_fn(int assert_cs, int flush, int cookie) +{ + return assert_cs; +} + + +int fpga_busy_fn(int cookie) +{ + return 1; +} +#endif + + +/* + * Test the state of the active-high FPGA DONE pin + */ +int fpga_done_fn(int cookie) +{ + if (in_be32((void*)GPIO1_IR) & GPIO1_FPGA_DONE) + return 1; + else + return 0; +} + + +/* + * FPGA pre-configuration function. Just make sure that + * FPGA reset is asserted to keep the FPGA from starting up after + * configuration. + */ +int fpga_pre_config_fn(int cookie) +{ + PRINTF("%s:%d: FPGA pre-configuration\n", __FUNCTION__, __LINE__); + fpga_reset(TRUE); + + /* release init# */ + out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | GPIO0_FPGA_FORCEINIT); + /* disable PLD IOs */ + out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_IOEN_N); + return 0; +} + + +/* + * FPGA post configuration function. Blip the FPGA reset line and then see if + * the FPGA appears to be running. + */ +int fpga_post_config_fn(int cookie) +{ + pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA; + int rc=0; + char *s; + + PRINTF("%s:%d: FPGA post configuration\n", __FUNCTION__, __LINE__); + + /* enable PLD0..7 pins */ + out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_IOEN_N); + + fpga_reset(TRUE); + udelay (100); + fpga_reset(FALSE); + udelay (100); + + FPGA_OUT32(&fpga->status, (gd->board_type << STATUS_HWREV_SHIFT) & STATUS_HWREV_MASK); + + /* NGCC only: enable ledlink */ + if ((s = getenv("bd_type")) && !strcmp(s, "ngcc")) + FPGA_SETBITS(&fpga->ctrla, 0x29f8c000); + + return rc; +} + + +int fpga_clk_fn(int assert_clk, int flush, int cookie) +{ + if (assert_clk) + out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_FPGA_CLK); + else + out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_FPGA_CLK); + + return assert_clk; +} + + +int fpga_wr_fn(int assert_write, int flush, int cookie) +{ + if (assert_write) + out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_FPGA_DATA); + else + out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_FPGA_DATA); + + return assert_write; +} + +#ifdef USE_SP_CODE +int fpga_wdata_fn(uchar data, int flush, int cookie) +{ + uchar val = data; + ulong or = in_be32((void*)GPIO1_OR); + int i = 7; + do { + /* Write data */ + if (val & 0x80) + or = (or & ~GPIO1_FPGA_CLK) | GPIO1_FPGA_DATA; + else + or = or & ~(GPIO1_FPGA_CLK | GPIO1_FPGA_DATA); + + out_be32((void*)GPIO1_OR, or); + + /* Assert the clock */ + or |= GPIO1_FPGA_CLK; + out_be32((void*)GPIO1_OR, or); + val <<= 1; + i --; + } while (i > 0); + + /* Write last data bit (the 8th clock comes from the sp_load() code */ + if (val & 0x80) + or = (or & ~GPIO1_FPGA_CLK) | GPIO1_FPGA_DATA; + else + or = or & ~(GPIO1_FPGA_CLK | GPIO1_FPGA_DATA); + + out_be32((void*)GPIO1_OR, or); + + return 0; +} +#endif + +#define NGCC_FPGA_PRG CLOCK_EN +#define NGCC_FPGA_DATA RESET_OUT +#define NGCC_FPGA_DONE CLOCK_IN +#define NGCC_FPGA_INIT IRIGB_R_IN +#define NGCC_FPGA_CLK CLOCK_OUT + +void ngcc_fpga_serialslave_init(void) +{ + PRINTF("%s:%d: Initialize serial slave interface\n", + __FUNCTION__, __LINE__); + + /* make sure program pin is inactive */ + ngcc_fpga_pgm_fn (FALSE, FALSE, 0); +} + +/* + * Set the active-low FPGA reset signal. + */ +void ngcc_fpga_reset(int assert) +{ + PRINTF("%s:%d: RESET ", __FUNCTION__, __LINE__); + + if (assert) { + FPGA_CLRBITS(NGCC_CTRL_BASE, NGCC_CTRL_FPGARST_N); + PRINTF("asserted\n"); + } else { + FPGA_SETBITS(NGCC_CTRL_BASE, NGCC_CTRL_FPGARST_N); + PRINTF("deasserted\n"); + } +} + + +/* + * Set the FPGA's active-low SelectMap program line to the specified level + */ +int ngcc_fpga_pgm_fn(int assert, int flush, int cookie) +{ + pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA; + + PRINTF("%s:%d: FPGA PROGRAM ", __FUNCTION__, __LINE__); + + if (assert) { + FPGA_CLRBITS(&fpga->ctrla, NGCC_FPGA_PRG); + PRINTF("asserted\n"); + } else { + FPGA_SETBITS(&fpga->ctrla, NGCC_FPGA_PRG); + PRINTF("deasserted\n"); + } + + return assert; +} + + +/* + * Test the state of the active-low FPGA INIT line. Return 1 on INIT + * asserted (low). + */ +int ngcc_fpga_init_fn(int cookie) +{ + pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA; + + PRINTF("%s:%d: INIT check... ", __FUNCTION__, __LINE__); + if (FPGA_IN32(&fpga->status) & NGCC_FPGA_INIT) { + PRINTF("high\n"); + return 0; + } else { + PRINTF("low\n"); + return 1; + } +} + + +/* + * Test the state of the active-high FPGA DONE pin + */ +int ngcc_fpga_done_fn(int cookie) +{ + pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA; + + PRINTF("%s:%d: DONE check... ", __FUNCTION__, __LINE__); + if (FPGA_IN32(&fpga->status) & NGCC_FPGA_DONE) { + PRINTF("DONE high\n"); + return 1; + } else { + PRINTF("low\n"); + return 0; + } +} + + +/* + * FPGA pre-configuration function. + */ +int ngcc_fpga_pre_config_fn(int cookie) +{ + pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA; + PRINTF("%s:%d: FPGA pre-configuration\n", __FUNCTION__, __LINE__); + + ngcc_fpga_reset(TRUE); + FPGA_CLRBITS(&fpga->ctrla, 0xfffffe00); + + ngcc_fpga_reset(TRUE); + return 0; +} + + +/* + * FPGA post configuration function. Blip the FPGA reset line and then see if + * the FPGA appears to be running. + */ +int ngcc_fpga_post_config_fn(int cookie) +{ + pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA; + + PRINTF("%s:%d: NGCC FPGA post configuration\n", __FUNCTION__, __LINE__); + + udelay (100); + ngcc_fpga_reset(FALSE); + + FPGA_SETBITS(&fpga->ctrla, 0x29f8c000); + + return 0; +} + + +int ngcc_fpga_clk_fn(int assert_clk, int flush, int cookie) +{ + pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA; + + if (assert_clk) + FPGA_SETBITS(&fpga->ctrla, NGCC_FPGA_CLK); + else + FPGA_CLRBITS(&fpga->ctrla, NGCC_FPGA_CLK); + + return assert_clk; +} + + +int ngcc_fpga_wr_fn(int assert_write, int flush, int cookie) +{ + pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA; + + if (assert_write) + FPGA_SETBITS(&fpga->ctrla, NGCC_FPGA_DATA); + else + FPGA_CLRBITS(&fpga->ctrla, NGCC_FPGA_DATA); + + return assert_write; +} + + +/* + * Initialize the fpga. Return 1 on success, 0 on failure. + */ +int pmc440_init_fpga(void) +{ + char *s; + + PRINTF("%s:%d: Initialize FPGA interface (relocation offset = 0x%.8lx)\n", + __FUNCTION__, __LINE__, gd->reloc_off); + fpga_init(gd->reloc_off); + + fpga_serialslave_init (); + PRINTF("%s:%d: Adding fpga 0\n", __FUNCTION__, __LINE__); + fpga_add (fpga_xilinx, &fpga[0]); + + /* NGCC only */ + if ((s = getenv("bd_type")) && !strcmp(s, "ngcc")) { + ngcc_fpga_serialslave_init (); + PRINTF("%s:%d: Adding fpga 1\n", __FUNCTION__, __LINE__); + fpga_add (fpga_xilinx, &fpga[1]); + } + + return 0; +} +#endif /* CONFIG_FPGA */ diff --git a/board/gen860t/fpga.h b/board/esd/pmc440/fpga.h similarity index 71% copy from board/gen860t/fpga.h copy to board/esd/pmc440/fpga.h index 01967a4..d61a3cf 100644 --- a/board/gen860t/fpga.h +++ b/board/esd/pmc440/fpga.h @@ -1,7 +1,6 @@ /* - * (C) Copyright 2002 - * Rich Ireland, Enterasys Networks, rireland@enterasys.com. - * Keith Outwater, keith_outwater@mvis.com. + * (C) Copyright 2007 + * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com * * See file CREDITS for list of people who contributed to this * project. @@ -20,14 +19,10 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA - * */
-/* - * Virtex2 FPGA configuration support for the GEN860T computer - */ +extern int pmc440_init_fpga(void);
-extern int gen860t_init_fpga(void); extern int fpga_pgm_fn(int assert_pgm, int flush, int cookie); extern int fpga_init_fn(int cookie); extern int fpga_err_fn(int cookie); @@ -35,6 +30,7 @@ extern int fpga_done_fn(int cookie); extern int fpga_clk_fn(int assert_clk, int flush, int cookie); extern int fpga_cs_fn(int assert_cs, int flush, int cookie); extern int fpga_wr_fn(int assert_write, int flush, int cookie); +extern int fpga_wdata_fn (uchar data, int flush, int cookie); extern int fpga_read_data_fn(unsigned char *data, int cookie); extern int fpga_write_data_fn(unsigned char data, int flush, int cookie); extern int fpga_busy_fn(int cookie); @@ -42,4 +38,10 @@ extern int fpga_abort_fn(int cookie ); extern int fpga_pre_config_fn(int cookie ); extern int fpga_post_config_fn(int cookie );
-/* vim: set ts=4 sw=4 tw=78: */ +extern int ngcc_fpga_pgm_fn(int assert_pgm, int flush, int cookie); +extern int ngcc_fpga_init_fn(int cookie); +extern int ngcc_fpga_done_fn(int cookie); +extern int ngcc_fpga_clk_fn(int assert_clk, int flush, int cookie); +extern int ngcc_fpga_wr_fn(int assert_write, int flush, int cookie); +extern int ngcc_fpga_pre_config_fn(int cookie ); +extern int ngcc_fpga_post_config_fn(int cookie );