[U-Boot] [PATCH v2 3/5] Kconfig: Sort bool, default, select and imply options

Fix Kconfig bool, default, select and imply options to be alphabetically sorted.

Signed-off-by: Michal Simek michal.simek@xilinx.com ---

Changes in v2: - new patch

I have sorted only Kconfig which I need for the next patch.

--- arch/Kconfig | 54 +++++----- arch/arm/Kconfig | 206 ++++++++++++++++++------------------- arch/arm/mach-at91/Kconfig | 60 +++++------ arch/arm/mach-imx/mx5/Kconfig | 12 +-- arch/arm/mach-imx/mx6/Kconfig | 158 ++++++++++++++-------------- arch/arm/mach-imx/mx7/Kconfig | 18 ++-- arch/arm/mach-omap2/am33xx/Kconfig | 46 ++++----- arch/arm/mach-omap2/omap3/Kconfig | 20 ++-- arch/arm/mach-rmobile/Kconfig.32 | 14 +-- arch/arm/mach-tegra/Kconfig | 8 +- arch/microblaze/Kconfig | 4 +- arch/mips/Kconfig | 50 ++++----- arch/powerpc/cpu/mpc83xx/Kconfig | 6 +- cmd/Kconfig | 14 +-- 14 files changed, 335 insertions(+), 335 deletions(-)

diff --git a/arch/Kconfig b/arch/Kconfig index cbeb9f67348f..7967fa50ac22 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -10,12 +10,12 @@ choice

config ARC bool "ARC architecture" - select HAVE_PRIVATE_LIBGCC - select SUPPORT_OF_CONTROL select ARCH_EARLY_INIT_R + select ARC_TIMER select CLK + select HAVE_PRIVATE_LIBGCC + select SUPPORT_OF_CONTROL select TIMER - select ARC_TIMER

config ARM bool "ARM architecture" @@ -46,10 +46,10 @@ config NDS32

config NIOS2 bool "Nios II architecture" - select SUPPORT_OF_CONTROL - select OF_CONTROL - select DM select CPU + select DM + select OF_CONTROL + select SUPPORT_OF_CONTROL

config PPC bool "PowerPC architecture" @@ -65,30 +65,30 @@ config RISCV config SANDBOX bool "Sandbox" select BOARD_LATE_INIT - select SUPPORT_OF_CONTROL select DM + select DM_GPIO + select DM_I2C select DM_KEYBOARD - select DM_SPI_FLASH + select DM_MMC select DM_SERIAL - select DM_I2C select DM_SPI - select DM_GPIO - select DM_MMC + select DM_SPI_FLASH select HAVE_BLOCK_DEVICE - select SPI select LZO + select SPI + select SUPPORT_OF_CONTROL imply CMD_GETTIME imply CMD_HASH imply CMD_IO imply CMD_IOTRACE imply CMD_LZMADEC + imply CMD_SATA + imply CMD_SF_TEST imply CRC32_VERIFY imply FAT_WRITE imply HASH_VERIFY imply LZMA imply SCSI - imply CMD_SATA - imply CMD_SF_TEST

config SH bool "SuperH architecture" @@ -97,39 +97,39 @@ config SH config X86 bool "x86 architecture" select CREATE_ARCH_SYMLINK - select HAVE_PRIVATE_LIBGCC - select USE_PRIVATE_LIBGCC - select SUPPORT_OF_CONTROL - select OF_CONTROL select DM select DM_PCI + select HAVE_PRIVATE_LIBGCC + select OF_CONTROL select PCI + select SUPPORT_OF_CONTROL select TIMER + select USE_PRIVATE_LIBGCC select X86_TSC_TIMER imply BLK + imply CMD_FPGA_LOADMK + imply CMD_GETTIME + imply CMD_IO + imply CMD_IRQ + imply CMD_PCI + imply CMD_SF_TEST + imply CMD_ZBOOT imply DM_ETH imply DM_GPIO imply DM_KEYBOARD imply DM_MMC imply DM_RTC - imply DM_SERIAL imply DM_SCSI + imply DM_SERIAL imply DM_SPI imply DM_SPI_FLASH imply DM_USB imply DM_VIDEO imply SYSRESET imply SYSRESET_X86 - imply CMD_FPGA_LOADMK - imply CMD_GETTIME - imply CMD_IO - imply CMD_IRQ - imply CMD_PCI - imply CMD_SF_TEST - imply CMD_ZBOOT - imply USB_HOST_ETHER imply USB_ETHER_ASIX imply USB_ETHER_SMSC95XX + imply USB_HOST_ETHER

config XTENSA bool "Xtensa architecture" diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ce619641b753..0c43c58ef0ed 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -219,25 +219,25 @@ config CPU_ARM1176

config CPU_V7A bool - select HAS_VBAR select HAS_THUMB2 + select HAS_VBAR select SYS_CACHE_SHIFT_6 imply SYS_ARM_MMU

config CPU_V7M bool select HAS_THUMB2 - select THUMB2_KERNEL - select SYS_CACHE_SHIFT_5 select SYS_ARM_MPU + select SYS_CACHE_SHIFT_5 select SYS_THUMB_BUILD + select THUMB2_KERNEL

config CPU_V7R bool select HAS_THUMB2 - select SYS_CACHE_SHIFT_6 - select SYS_ARM_MPU select SYS_ARM_CACHE_CP15 + select SYS_ARM_MPU + select SYS_CACHE_SHIFT_6

config CPU_PXA bool @@ -427,19 +427,19 @@ config ARCH_DAVINCI

config KIRKWOOD bool "Marvell Kirkwood" - select CPU_ARM926EJS - select BOARD_EARLY_INIT_F select ARCH_MISC_INIT + select BOARD_EARLY_INIT_F + select CPU_ARM926EJS

config ARCH_MVEBU bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" - select OF_CONTROL - select OF_SEPARATE select DM select DM_ETH select DM_SERIAL select DM_SPI select DM_SPI_FLASH + select OF_CONTROL + select OF_SEPARATE select SPI

config TARGET_DEVKIT3250 @@ -463,31 +463,31 @@ config ORION5X

config TARGET_SPEAR300 bool "Support spear300" - select CPU_ARM926EJS select BOARD_EARLY_INIT_F - imply CMD_SAVES + select CPU_ARM926EJS select PL011_SERIAL + imply CMD_SAVES

config TARGET_SPEAR310 bool "Support spear310" - select CPU_ARM926EJS select BOARD_EARLY_INIT_F - imply CMD_SAVES + select CPU_ARM926EJS select PL011_SERIAL + imply CMD_SAVES

config TARGET_SPEAR320 bool "Support spear320" - select CPU_ARM926EJS select BOARD_EARLY_INIT_F - imply CMD_SAVES + select CPU_ARM926EJS select PL011_SERIAL + imply CMD_SAVES

config TARGET_SPEAR600 bool "Support spear600" - select CPU_ARM926EJS select BOARD_EARLY_INIT_F - imply CMD_SAVES + select CPU_ARM926EJS select PL011_SERIAL + imply CMD_SAVES

config TARGET_STV0991 bool "Support stv0991" @@ -496,16 +496,16 @@ config TARGET_STV0991 select DM_SERIAL select DM_SPI select DM_SPI_FLASH + select PL01X_SERIAL select SPI select SPI_FLASH - select PL01X_SERIAL

config TARGET_X600 bool "Support x600" select BOARD_LATE_INIT select CPU_ARM926EJS - select SUPPORT_SPL select PL011_SERIAL + select SUPPORT_SPL

config TARGET_WOODBURN bool "Support woodburn" @@ -528,8 +528,8 @@ config TARGET_MX35PDK config ARCH_BCM283X bool "Broadcom BCM283X family" select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL select OF_CONTROL select PL01X_SERIAL select SERIAL_SEARCH_ALL @@ -577,13 +577,13 @@ config TARGET_BCM28155_AP config TARGET_BCMCYGNUS bool "Support bcmcygnus" select CPU_V7A - imply CRC32_VERIFY + imply BCM_SF2_ETH + imply BCM_SF2_ETH_GMAC imply CMD_HASH + imply CRC32_VERIFY imply FAT_WRITE imply HASH_VERIFY imply NETDEVICES - imply BCM_SF2_ETH - imply BCM_SF2_ETH_GMAC

config TARGET_BCMNSP bool "Support bcmnsp" @@ -600,12 +600,12 @@ config TARGET_BCMNS2 config ARCH_EXYNOS bool "Samsung EXYNOS" select DM + select DM_GPIO select DM_I2C - select DM_SPI_FLASH + select DM_KEYBOARD select DM_SERIAL select DM_SPI - select DM_GPIO - select DM_KEYBOARD + select DM_SPI_FLASH select SPI imply FAT_WRITE

@@ -613,9 +613,9 @@ config ARCH_S5PC1XX bool "Samsung S5PC1XX" select CPU_V7A select DM - select DM_SERIAL select DM_GPIO select DM_I2C + select DM_SERIAL

config ARCH_HIGHBANK bool "Calxeda Highbank" @@ -630,14 +630,14 @@ config ARCH_INTEGRATOR

config ARCH_KEYSTONE bool "TI Keystone" + select CMD_POWEROFF select CPU_V7A select SUPPORT_SPL - select SYS_THUMB_BUILD - select CMD_POWEROFF select SYS_ARCH_TIMER + select SYS_THUMB_BUILD imply CMD_MTDPARTS - imply FIT imply CMD_SAVES + imply FIT

config ARCH_OMAP2PLUS bool "TI OMAP2+" @@ -690,12 +690,12 @@ config ARCH_MX7ULP

config ARCH_MX7 bool "Freescale MX7" + select ARCH_MISC_INIT + select BOARD_EARLY_INIT_F select CPU_V7A select SYS_FSL_HAS_SEC if SECURE_BOOT select SYS_FSL_SEC_COMPAT_4 select SYS_FSL_SEC_LE - select BOARD_EARLY_INIT_F - select ARCH_MISC_INIT imply MXC_GPIO

config ARCH_MX6 @@ -714,8 +714,8 @@ endif

config ARCH_MX5 bool "Freescale MX5" - select CPU_V7A select BOARD_EARLY_INIT_F + select CPU_V7A imply MXC_GPIO

config ARCH_OWL @@ -734,9 +734,9 @@ config ARCH_QEMU

config ARCH_RMOBILE bool "Renesas ARM SoCs" + select BOARD_EARLY_INIT_F select DM select DM_SERIAL - select BOARD_EARLY_INIT_F imply FAT_WRITE imply SYS_THUMB_BUILD

@@ -751,30 +751,32 @@ config ARCH_SNAPDRAGON select DM select DM_GPIO select DM_SERIAL - select SPMI + select MSM_SMEM select OF_CONTROL select OF_SEPARATE select SMEM - select MSM_SMEM + select SPMI

config ARCH_SOCFPGA bool "Altera SOCFPGA family" select ARCH_EARLY_INIT_R select ARCH_MISC_INIT + select ARM64 if TARGET_SOCFPGA_STRATIX10 select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 select DM select DM_SERIAL select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 select OF_CONTROL + select SPL_DM_SERIAL select SPL_LIBCOMMON_SUPPORT select SPL_LIBDISK_SUPPORT select SPL_LIBGENERIC_SUPPORT select SPL_MMC_SUPPORT if DM_MMC select SPL_NAND_SUPPORT if SPL_NAND_DENALI select SPL_OF_CONTROL - select SPL_SERIAL_SUPPORT - select SPL_DM_SERIAL select SPL_RESET_SUPPORT + select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10 + select SPL_SERIAL_SUPPORT select SPL_SPI_FLASH_SUPPORT if SPL_SPI_SUPPORT select SPL_SPI_SUPPORT if DM_SPI select SPL_WATCHDOG_SUPPORT @@ -782,14 +784,12 @@ config ARCH_SOCFPGA select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE select SYS_NS16550 select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 - select ARM64 if TARGET_SOCFPGA_STRATIX10 imply CMD_MTDPARTS imply CRC32_VERIFY imply DM_SPI imply DM_SPI_FLASH imply FAT_WRITE imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION - select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10

config ARCH_SUNXI bool "Support sunxi (Allwinner) SoCs" @@ -809,12 +809,12 @@ config ARCH_SUNXI select SPECIFY_CONSOLE_INDEX select SPL_STACK_R if SPL select SPL_SYS_MALLOC_SIMPLE if SPL - select SYS_NS16550 select SPL_SYS_THUMB_BUILD if !ARM64 + select SYS_NS16550 select SYS_THUMB_BUILD if !ARM64 select USB if DISTRO_DEFAULTS - select USB_STORAGE if DISTRO_DEFAULTS select USB_KEYBOARD if DISTRO_DEFAULTS + select USB_STORAGE if DISTRO_DEFAULTS select USE_TINY_PRINTF imply CMD_GPT imply DISTRO_DEFAULTS @@ -839,51 +839,51 @@ config ARCH_VF610

config ARCH_ZYNQ bool "Xilinx Zynq based platform" + select BOARD_EARLY_INIT_F if WDT select BOARD_LATE_INIT + select CLK + select CLK_ZYNQ select CPU_V7A - select SUPPORT_SPL - select OF_CONTROL - select SPL_BOARD_INIT if SPL - select BOARD_EARLY_INIT_F if WDT - select SPL_OF_CONTROL if SPL select DM select DM_ETH if NET - select SPL_DM if SPL select DM_MMC if MMC - select DM_SPI select DM_SERIAL + select DM_SPI select DM_SPI_FLASH - select SPL_SEPARATE_BSS if SPL select DM_USB if USB - select CLK - select SPL_CLK if SPL - select CLK_ZYNQ + select OF_CONTROL select SPI + select SPL_BOARD_INIT if SPL + select SPL_CLK if SPL + select SPL_DM if SPL + select SPL_OF_CONTROL if SPL + select SPL_SEPARATE_BSS if SPL + select SUPPORT_SPL + imply ARCH_EARLY_INIT_R imply CMD_CLK - imply FAT_WRITE imply CMD_SPL - imply ARCH_EARLY_INIT_R + imply FAT_WRITE

config ARCH_ZYNQMP_R5 bool "Xilinx ZynqMP R5 based platform" + select CLK select CPU_V7R - select OF_CONTROL select DM select DM_SERIAL - select CLK + select OF_CONTROL

config ARCH_ZYNQMP bool "Xilinx ZynqMP based platform" select ARM64 select BOARD_LATE_INIT + select CLK select DM - select OF_CONTROL select DM_SERIAL - select SUPPORT_SPL - select CLK + select DM_USB if USB + select OF_CONTROL select SPL_BOARD_INIT if SPL select SPL_CLK if SPL - select DM_USB if USB + select SUPPORT_SPL imply FAT_WRITE

config TEGRA @@ -899,8 +899,8 @@ config TARGET_VEXPRESS64_AEMV8A config TARGET_VEXPRESS64_BASE_FVP bool "Support Versatile Express ARMv8a FVP BASE model" select ARM64 - select SEMIHOSTING select PL01X_SERIAL + select SEMIHOSTING

config TARGET_VEXPRESS64_BASE_FVP_DRAM bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" @@ -920,9 +920,9 @@ config TARGET_VEXPRESS64_JUNO config TARGET_LS2080A_EMU bool "Support ls2080a_emu" select ARCH_LS2080A + select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY - select ARCH_MISC_INIT help Support for Freescale LS2080A_EMU platform The LS2080A Development System (EMULATOR) is a pre silicon @@ -932,9 +932,9 @@ config TARGET_LS2080A_EMU config TARGET_LS2080A_SIMU bool "Support ls2080a_simu" select ARCH_LS2080A + select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY - select ARCH_MISC_INIT help Support for Freescale LS2080A_SIMU platform The LS2080A Development System (QDS) is a pre silicon @@ -944,9 +944,9 @@ config TARGET_LS2080A_SIMU config TARGET_LS1088AQDS bool "Support ls1088aqds" select ARCH_LS1088A + select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY - select ARCH_MISC_INIT select BOARD_LATE_INIT select SUPPORT_SPL help @@ -958,11 +958,11 @@ config TARGET_LS1088AQDS config TARGET_LS2080AQDS bool "Support ls2080aqds" select ARCH_LS2080A + select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY select BOARD_LATE_INIT select SUPPORT_SPL - select ARCH_MISC_INIT imply SCSI imply SCSI_AHCI help @@ -974,11 +974,11 @@ config TARGET_LS2080AQDS config TARGET_LS2080ARDB bool "Support ls2080ardb" select ARCH_LS2080A + select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY select BOARD_LATE_INIT select SUPPORT_SPL - select ARCH_MISC_INIT imply SCSI imply SCSI_AHCI help @@ -990,11 +990,11 @@ config TARGET_LS2080ARDB config TARGET_LS2081ARDB bool "Support ls2081ardb" select ARCH_LS2080A + select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY select BOARD_LATE_INIT select SUPPORT_SPL - select ARCH_MISC_INIT help Support for Freescale LS2081ARDB platform. The LS2081A Reference design board (RDB) is a high-performance @@ -1018,9 +1018,9 @@ config TARGET_POPLAR bool "Support Poplar 96boards Enterprise Edition Platform" select ARM64 select DM - select OF_CONTROL select DM_SERIAL select DM_USB + select OF_CONTROL select PL01X_SERIAL help Support for Poplar 96boards EE platform. It features a HI3798cv200 @@ -1067,8 +1067,8 @@ config TARGET_LS1012A2G5RDB config TARGET_LS1012AFRWY bool "Support ls1012afrwy" select ARCH_LS1012A - select BOARD_LATE_INIT select ARM64 + select BOARD_LATE_INIT imply SCSI imply SCSI_AHCI help @@ -1090,9 +1090,9 @@ config TARGET_LS1012AFRDM config TARGET_LS1088ARDB bool "Support ls1088ardb" select ARCH_LS1088A + select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY - select ARCH_MISC_INIT select BOARD_LATE_INIT select SUPPORT_SPL help @@ -1103,40 +1103,40 @@ config TARGET_LS1088ARDB

config TARGET_LS1021AQDS bool "Support ls1021aqds" + select ARCH_LS1021A + select ARCH_SUPPORT_PSCI + select BOARD_EARLY_INIT_F select BOARD_LATE_INIT select CPU_V7A select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT - select SUPPORT_SPL - select ARCH_LS1021A - select ARCH_SUPPORT_PSCI select LS1_DEEP_SLEEP + select SUPPORT_SPL select SYS_FSL_DDR - select BOARD_EARLY_INIT_F imply SCSI

config TARGET_LS1021ATWR bool "Support ls1021atwr" + select ARCH_LS1021A + select ARCH_SUPPORT_PSCI + select BOARD_EARLY_INIT_F select BOARD_LATE_INIT select CPU_V7A select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT - select SUPPORT_SPL - select ARCH_LS1021A - select ARCH_SUPPORT_PSCI select LS1_DEEP_SLEEP - select BOARD_EARLY_INIT_F + select SUPPORT_SPL imply SCSI

config TARGET_LS1021AIOT bool "Support ls1021aiot" + select ARCH_LS1021A + select ARCH_SUPPORT_PSCI select BOARD_LATE_INIT select CPU_V7A select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select SUPPORT_SPL - select ARCH_LS1021A - select ARCH_SUPPORT_PSCI imply SCSI help Support for Freescale LS1021AIOT platform. @@ -1149,9 +1149,9 @@ config TARGET_LS1043AQDS select ARCH_LS1043A select ARM64 select ARMV8_MULTIENTRY + select BOARD_EARLY_INIT_F select BOARD_LATE_INIT select SUPPORT_SPL - select BOARD_EARLY_INIT_F imply SCSI help Support for Freescale LS1043AQDS platform. @@ -1161,9 +1161,9 @@ config TARGET_LS1043ARDB select ARCH_LS1043A select ARM64 select ARMV8_MULTIENTRY + select BOARD_EARLY_INIT_F select BOARD_LATE_INIT select SUPPORT_SPL - select BOARD_EARLY_INIT_F imply SCSI help Support for Freescale LS1043ARDB platform. @@ -1173,10 +1173,10 @@ config TARGET_LS1046AQDS select ARCH_LS1046A select ARM64 select ARMV8_MULTIENTRY + select BOARD_EARLY_INIT_F select BOARD_LATE_INIT - select SUPPORT_SPL select DM_SPI_FLASH if DM_SPI - select BOARD_EARLY_INIT_F + select SUPPORT_SPL imply SCSI help Support for Freescale LS1046AQDS platform. @@ -1189,11 +1189,11 @@ config TARGET_LS1046ARDB select ARCH_LS1046A select ARM64 select ARMV8_MULTIENTRY + select BOARD_EARLY_INIT_F select BOARD_LATE_INIT - select SUPPORT_SPL select DM_SPI_FLASH if DM_SPI select POWER_MC34VR500 - select BOARD_EARLY_INIT_F + select SUPPORT_SPL imply SCSI help Support for Freescale LS1046ARDB platform. @@ -1247,12 +1247,12 @@ config STM32

config ARCH_STI bool "Support STMicrolectronics SoCs" + select BLK select CPU_V7A select DM - select DM_SERIAL - select BLK select DM_MMC select DM_RESET + select DM_SERIAL help Support for STMicroelectronics STiH407/10 SoC family. This SoC is used on Linaro 96Board STiH410-B2260 @@ -1266,9 +1266,9 @@ config ARCH_STM32MP select DM_GPIO select DM_RESET select DM_SERIAL + select MISC select OF_CONTROL select OF_LIBFDT - select MISC select PINCTRL select REGMAP select SUPPORT_SPL @@ -1283,44 +1283,44 @@ config ARCH_STM32MP

config ARCH_ROCKCHIP bool "Support Rockchip SoCs" - select OF_CONTROL select BLK select DM - select SPL_DM if SPL - select SYS_MALLOC_F - select SYS_THUMB_BUILD if !ARM64 - select SPL_SYS_MALLOC_SIMPLE if SPL select DM_GPIO select DM_I2C select DM_MMC + select DM_PWM + select DM_REGULATOR select DM_SERIAL select DM_SPI select DM_SPI_FLASH select DM_USB if USB - select DM_PWM - select DM_REGULATOR select ENABLE_ARM_SOC_BOOT0_HOOK + select OF_CONTROL select SPI + select SPL_DM if SPL + select SPL_SYS_MALLOC_SIMPLE if SPL + select SYS_MALLOC_F + select SYS_THUMB_BUILD if !ARM64 + imply ADC imply DISTRO_DEFAULTS imply FAT_WRITE - imply USB_FUNCTION_FASTBOOT - imply SPL_SYSRESET - imply TPL_SYSRESET - imply ADC imply SARADC_ROCKCHIP + imply SPL_SYSRESET imply SYS_NS16550 + imply TPL_SYSRESET + imply USB_FUNCTION_FASTBOOT

config TARGET_THUNDERX_88XX bool "Support ThunderX 88xx" select ARM64 select OF_CONTROL - select SYS_CACHE_SHIFT_7 select PL01X_SERIAL + select SYS_CACHE_SHIFT_7

config ARCH_ASPEED bool "Support Aspeed SoCs" - select OF_CONTROL select DM + select OF_CONTROL

endchoice

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index ce6be3829afe..1a56957cf9d1 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -76,18 +76,18 @@ config TARGET_SNAPPER9260 bool "Support snapper9260" select AT91SAM9260 select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL

config TARGET_GURNARD bool "Support gurnard" select AT91SAM9G45 select BOARD_LATE_INIT select DM + select DM_ETH + select DM_GPIO select DM_SERIAL select DM_SPI - select DM_GPIO - select DM_ETH select SPI

config TARGET_AT91SAM9261EK @@ -115,8 +115,8 @@ config TARGET_PM9263 config TARGET_AT91SAM9M10G45EK bool "Atmel AT91SAM9M10G45-EK board" select AT91SAM9M10G45 - select SUPPORT_SPL select BOARD_EARLY_INIT_F + select SUPPORT_SPL

config TARGET_PM9G45 bool "Ronetix pm9g45 board" @@ -130,8 +130,8 @@ config TARGET_PICOSAM9G45 config TARGET_AT91SAM9N12EK bool "Atmel AT91SAM9N12-EK board" select AT91SAM9N12 - select SUPPORT_SPL select BOARD_EARLY_INIT_F + select SUPPORT_SPL

config TARGET_AT91SAM9RLEK bool "Atmel at91sam9rl reference board" @@ -141,28 +141,28 @@ config TARGET_AT91SAM9RLEK config TARGET_AT91SAM9X5EK bool "Atmel AT91SAM9X5-EK board" select AT91SAM9X5 - select SUPPORT_SPL select BOARD_EARLY_INIT_F select BOARD_LATE_INIT + select SUPPORT_SPL

config TARGET_SAMA5D2_PTC_EK bool "SAMA5D2 PTC EK board" - select SAMA5D2 select BOARD_EARLY_INIT_F + select SAMA5D2

config TARGET_SAMA5D2_XPLAINED bool "SAMA5D2 Xplained board" - select SAMA5D2 - select SUPPORT_SPL select BOARD_EARLY_INIT_F select BOARD_LATE_INIT + select SAMA5D2 + select SUPPORT_SPL

config TARGET_SAMA5D27_SOM1_EK bool "SAMA5D27 SOM1 EK board" - select CPU_V7A - select SUPPORT_SPL select BOARD_EARLY_INIT_F select BOARD_LATE_INIT + select CPU_V7A + select SUPPORT_SPL help The SAMA5D27 SOM1 embeds SAMA5D2 SiP(System in Package), a 64Mbit QSPI flash, KSZ8081 Phy and a Mac-address EEPROM @@ -172,30 +172,30 @@ config TARGET_SAMA5D27_SOM1_EK

config TARGET_SAMA5D3_XPLAINED bool "SAMA5D3 Xplained board" + select BOARD_EARLY_INIT_F select SAMA5D3 select SUPPORT_SPL - select BOARD_EARLY_INIT_F

config TARGET_SAMA5D3XEK bool "SAMA5D3X-EK board" - select SAMA5D3 + select BOARD_EARLY_INIT_F select BOARD_LATE_INIT + select SAMA5D3 select SUPPORT_SPL - select BOARD_EARLY_INIT_F

config TARGET_SAMA5D4_XPLAINED bool "SAMA5D4 Xplained board" - select SAMA5D4 - select SUPPORT_SPL select BOARD_EARLY_INIT_F select BOARD_LATE_INIT + select SAMA5D4 + select SUPPORT_SPL

config TARGET_SAMA5D4EK bool "SAMA5D4 Evaluation Kit" - select SAMA5D4 - select SUPPORT_SPL select BOARD_EARLY_INIT_F select BOARD_LATE_INIT + select SAMA5D4 + select SUPPORT_SPL

config TARGET_MEESC bool "Support meesc" @@ -204,39 +204,39 @@ config TARGET_MEESC config TARGET_CORVUS bool "Support corvus" select AT91SAM9M10G45 - select SUPPORT_SPL select DM - select DM_SERIAL - select DM_GPIO select DM_ETH + select DM_GPIO + select DM_SERIAL + select SUPPORT_SPL

config TARGET_TAURUS bool "Support taurus" select AT91SAM9G20 - select SUPPORT_SPL select DM + select DM_ETH + select DM_GPIO select DM_SERIAL select DM_SPI - select DM_GPIO - select DM_ETH select SPI + select SUPPORT_SPL

config TARGET_SMARTWEB bool "Support smartweb" select AT91SAM9260 - select SUPPORT_SPL select DM - select DM_SERIAL - select DM_GPIO select DM_ETH + select DM_GPIO + select DM_SERIAL + select SUPPORT_SPL

config TARGET_VINCO bool "Support VINCO" - select SAMA5D4 - select SUPPORT_SPL select DM select DM_SPI + select SAMA5D4 select SPI + select SUPPORT_SPL

config TARGET_WB45N bool "Support Laird WB45N" @@ -245,10 +245,10 @@ config TARGET_WB45N

config TARGET_WB50N bool "Support Laird WB50N" + select BOARD_EARLY_INIT_F select BOARD_LATE_INIT select CPU_V7A select SUPPORT_SPL - select BOARD_EARLY_INIT_F

endchoice

diff --git a/arch/arm/mach-imx/mx5/Kconfig b/arch/arm/mach-imx/mx5/Kconfig index 3654670442fb..1bb373bf2d1c 100644 --- a/arch/arm/mach-imx/mx5/Kconfig +++ b/arch/arm/mach-imx/mx5/Kconfig @@ -1,14 +1,14 @@ if ARCH_MX5

config MX5 - select GPT_TIMER bool default y + select GPT_TIMER

config MX51 bool - select SYS_FSL_ERRATUM_ESDHC_A001 select ARM_CORTEX_A8_CVE_2017_5715 + select SYS_FSL_ERRATUM_ESDHC_A001

config MX53 bool @@ -21,13 +21,13 @@ choice config TARGET_KP_IMX53 bool "Support K+P imx53 board" select BOARD_LATE_INIT - select MX53 select DM - select DM_SERIAL select DM_ETH - select DM_I2C select DM_GPIO + select DM_I2C select DM_PMIC + select DM_SERIAL + select MX53

config TARGET_MX51EVK bool "Support mx51evk" @@ -41,9 +41,9 @@ config TARGET_MX53ARD config TARGET_MX53CX9020 bool "Support CX9020" select BOARD_LATE_INIT - select MX53 select DM select DM_SERIAL + select MX53

config TARGET_MX53EVK bool "Support mx53evk" diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index b7b77cc51b97..5cce9ce23c0e 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -1,89 +1,89 @@ if ARCH_MX6

config MX6_SMP + bool select ARM_ERRATA_751472 select ARM_ERRATA_761320 select ARM_ERRATA_794072 select ARM_ERRATA_845369 select MP - bool

config MX6 - select ARM_ERRATA_743622 if !MX6UL && !MX6ULL - select GPT_TIMER if !MX6UL && !MX6ULL bool default y + select ARM_ERRATA_743622 if !MX6UL && !MX6ULL + select GPT_TIMER if !MX6UL && !MX6ULL imply CMD_FUSE

config MX6D + bool select HAS_CAAM select MX6_SMP - bool

config MX6DL + bool select HAS_CAAM select MX6_SMP - bool

config MX6Q + bool select HAS_CAAM select MX6_SMP - bool

config MX6QDL + bool select HAS_CAAM select MX6_SMP - bool

config MX6S - select HAS_CAAM bool + select HAS_CAAM

config MX6SL bool

config MX6SX + bool select HAS_CAAM select ROM_UNIFIED_SECTIONS - bool

config MX6SLL - select ROM_UNIFIED_SECTIONS bool + select ROM_UNIFIED_SECTIONS

config MX6UL + bool select HAS_CAAM - select SYS_L2CACHE_OFF select ROM_UNIFIED_SECTIONS select SYSCOUNTER_TIMER - bool + select SYS_L2CACHE_OFF

config MX6UL_LITESOM bool - select MX6UL select DM select DM_THERMAL + select MX6UL select SUPPORT_SPL

config MX6UL_OPOS6UL bool - select MX6UL select BOARD_LATE_INIT select DM select DM_GPIO select DM_MMC select DM_THERMAL - select SUPPORT_SPL + select MX6UL select SPL_DM if SPL select SPL_OF_CONTROL if SPL - select SPL_SEPARATE_BSS if SPL select SPL_PINCTRL if SPL + select SPL_SEPARATE_BSS if SPL + select SUPPORT_SPL

config MX6ULL - select SYS_L2CACHE_OFF + bool select ROM_UNIFIED_SECTIONS select SYSCOUNTER_TIMER - bool + select SYS_L2CACHE_OFF

config MX6_DDRCAL bool "Include dynamic DDR calibration routines" @@ -106,10 +106,10 @@ config TARGET_ADVANTECH_DMS_BA16 config TARGET_APALIS_IMX6 bool "Toradex Apalis iMX6 board" select BOARD_LATE_INIT - select SUPPORT_SPL select DM select DM_SERIAL select DM_THERMAL + select SUPPORT_SPL imply CMD_SATA

config TARGET_ARISTAINETOS @@ -125,44 +125,44 @@ config TARGET_ARISTAINETOS2B

config TARGET_CGTQMX6EVAL bool "cgtqmx6eval" - select MX6QDL select BOARD_LATE_INIT - select SUPPORT_SPL select DM select DM_THERMAL + select MX6QDL + select SUPPORT_SPL

config TARGET_CM_FX6 bool "CM-FX6" - select SUPPORT_SPL - select MX6QDL select BOARD_LATE_INIT select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL + select MX6QDL + select SUPPORT_SPL

config TARGET_COLIBRI_IMX6 bool "Toradex Colibri iMX6 board" select BOARD_LATE_INIT - select SUPPORT_SPL select DM select DM_SERIAL select DM_THERMAL + select SUPPORT_SPL

config TARGET_DHCOMIMX6 bool "dh_imx6" - select MX6QDL - select BOARD_LATE_INIT select BOARD_EARLY_INIT_F - select SUPPORT_SPL + select BOARD_LATE_INIT select DM select DM_THERMAL + select MX6QDL + select SUPPORT_SPL imply CMD_SPL

config TARGET_DISPLAY5 bool "LWN DISPLAY5 board" - select SUPPORT_SPL select DM select DM_SERIAL + select SUPPORT_SPL

config TARGET_EMBESTMX6BOARDS bool "embestmx6boards" @@ -192,8 +192,8 @@ config TARGET_MCCMON6

config TARGET_MX6CUBOXI bool "Solid-run mx6 boards" - select MX6QDL select BOARD_LATE_INIT + select MX6QDL select SUPPORT_SPL

config TARGET_MX6LOGICPD @@ -222,9 +222,6 @@ config TARGET_MX6QARM2

config TARGET_MX6DL_MAMOJ bool "Support BTicino Mamoj" - select MX6QDL - select OF_CONTROL - select PINCTRL select DM select DM_ETH select DM_GPIO @@ -233,59 +230,62 @@ config TARGET_MX6DL_MAMOJ select DM_PMIC select DM_PMIC_PFUZE100 select DM_THERMAL + select MX6QDL + select OF_CONTROL + select PINCTRL select SPL - select SUPPORT_SPL select SPL_DM if SPL - select SPL_OF_LIBFDT if SPL - select SPL_OF_CONTROL if SPL - select SPL_PINCTRL if SPL - select SPL_SEPARATE_BSS if SPL select SPL_GPIO_SUPPORT if SPL select SPL_LIBCOMMON_SUPPORT if SPL select SPL_LIBDISK_SUPPORT if SPL select SPL_LIBGENERIC_SUPPORT if SPL select SPL_MMC_SUPPORT if SPL + select SPL_OF_CONTROL if SPL + select SPL_OF_LIBFDT if SPL + select SPL_PINCTRL if SPL + select SPL_SEPARATE_BSS if SPL select SPL_SERIAL_SUPPORT if SPL - select SPL_USB_HOST_SUPPORT if SPL select SPL_USB_GADGET_SUPPORT if SPL + select SPL_USB_HOST_SUPPORT if SPL select SPL_USB_SDP_SUPPORT if SPL select SPL_WATCHDOG_SUPPORT if SPL + select SUPPORT_SPL

config TARGET_MX6Q_ENGICAM bool "Support Engicam i.Core(RQS)" select BOARD_LATE_INIT - select MX6QDL - select OF_CONTROL - select SPL_OF_LIBFDT select DM select DM_ETH select DM_GPIO select DM_I2C select DM_MMC select DM_THERMAL - select SUPPORT_SPL + select MX6QDL + select OF_CONTROL select SPL_DM if SPL select SPL_OF_CONTROL if SPL - select SPL_SEPARATE_BSS if SPL + select SPL_OF_LIBFDT select SPL_PINCTRL if SPL + select SPL_SEPARATE_BSS if SPL + select SUPPORT_SPL

config TARGET_MX6SABREAUTO bool "mx6sabreauto" - select MX6QDL + select BOARD_EARLY_INIT_F select BOARD_LATE_INIT - select SUPPORT_SPL select DM select DM_THERMAL - select BOARD_EARLY_INIT_F + select MX6QDL + select SUPPORT_SPL

config TARGET_MX6SABRESD bool "mx6sabresd" - select MX6QDL + select BOARD_EARLY_INIT_F select BOARD_LATE_INIT - select SUPPORT_SPL select DM select DM_THERMAL - select BOARD_EARLY_INIT_F + select MX6QDL + select SUPPORT_SPL

config TARGET_MX6SLEVK bool "mx6slevk" @@ -295,73 +295,73 @@ config TARGET_MX6SLEVK config TARGET_MX6SLLEVK bool "mx6sll evk" select BOARD_LATE_INIT - select MX6SLL select DM select DM_THERMAL + select MX6SLL

config TARGET_MX6SXSABRESD bool "mx6sxsabresd" + select BOARD_EARLY_INIT_F select BOARD_LATE_INIT - select MX6SX - select SUPPORT_SPL select DM select DM_THERMAL - select BOARD_EARLY_INIT_F + select MX6SX + select SUPPORT_SPL

config TARGET_MX6SXSABREAUTO bool "mx6sxsabreauto" + select BOARD_EARLY_INIT_F select BOARD_LATE_INIT - select MX6SX select DM select DM_THERMAL - select BOARD_EARLY_INIT_F + select MX6SX

config TARGET_MX6UL_9X9_EVK bool "mx6ul_9x9_evk" select BOARD_LATE_INIT - select MX6UL select DM select DM_THERMAL + select MX6UL select SUPPORT_SPL

config TARGET_MX6UL_14X14_EVK - select BOARD_LATE_INIT bool "mx6ul_14x14_evk" - select MX6UL + select BOARD_LATE_INIT select DM select DM_THERMAL + select MX6UL select SUPPORT_SPL

config TARGET_MX6UL_ENGICAM bool "Support Engicam GEAM6UL/Is.IoT" select BOARD_LATE_INIT - select MX6UL - select OF_CONTROL select DM select DM_ETH select DM_GPIO select DM_I2C select DM_MMC select DM_THERMAL - select SUPPORT_SPL + select MX6UL + select OF_CONTROL select SPL_DM if SPL select SPL_OF_CONTROL if SPL - select SPL_SEPARATE_BSS if SPL select SPL_PINCTRL if SPL + select SPL_SEPARATE_BSS if SPL + select SUPPORT_SPL

config TARGET_MX6ULL_14X14_EVK bool "Support mx6ull_14x14_evk" select BOARD_LATE_INIT - select MX6ULL select DM select DM_THERMAL + select MX6ULL

config TARGET_NITROGEN6X bool "nitrogen6x" - imply USB_HOST_ETHER imply USB_ETHER_ASIX - imply USB_ETHER_SMSC95XX imply USB_ETHER_MCS7830 + imply USB_ETHER_SMSC95XX + imply USB_HOST_ETHER

config TARGET_OPOS6ULDEV bool "Armadeus OPOS6ULDev board" @@ -396,8 +396,8 @@ config TARGET_PCM058

config TARGET_PFLA02 bool "Phytec PFLA02 (PhyFlex) i.MX6 Quad" - select MX6QDL select BOARD_LATE_INIT + select MX6QDL select SUPPORT_SPL

config TARGET_SECOMX6 @@ -415,12 +415,12 @@ config TARGET_TITANIUM

config TARGET_KP_IMX6Q_TPC bool "K+P KP_IMX6Q_TPC i.MX6 Quad" - select MX6QDL - select BOARD_LATE_INIT select BOARD_EARLY_INIT_F - select SUPPORT_SPL + select BOARD_LATE_INIT select DM select DM_THERMAL + select MX6QDL + select SUPPORT_SPL imply CMD_SPL

config TARGET_TQMA6 @@ -429,57 +429,57 @@ config TARGET_TQMA6

config TARGET_UDOO bool "udoo" - select MX6QDL select BOARD_LATE_INIT + select MX6QDL select SUPPORT_SPL

config TARGET_UDOO_NEO bool "UDOO Neo" select BOARD_LATE_INIT - select SUPPORT_SPL - select MX6SX select DM select DM_THERMAL + select MX6SX + select SUPPORT_SPL

config TARGET_SAMTEC_VINING_2000 bool "samtec VIN|ING 2000" select BOARD_LATE_INIT - select MX6SX select DM select DM_THERMAL + select MX6SX

config TARGET_WANDBOARD bool "wandboard" - select MX6QDL select BOARD_LATE_INIT + select MX6QDL select SUPPORT_SPL

config TARGET_WARP bool "WaRP" - select MX6SL select BOARD_LATE_INIT + select MX6SL

config TARGET_XPRESS bool "CCV xPress" select BOARD_LATE_INIT - select MX6UL select DM select DM_THERMAL + select MX6UL select SUPPORT_SPL

config TARGET_ZC5202 bool "zc5202" select BOARD_LATE_INIT - select SUPPORT_SPL select DM select DM_THERMAL + select SUPPORT_SPL

config TARGET_ZC5601 bool "zc5601" select BOARD_LATE_INIT - select SUPPORT_SPL select DM select DM_THERMAL + select SUPPORT_SPL

endchoice

diff --git a/arch/arm/mach-imx/mx7/Kconfig b/arch/arm/mach-imx/mx7/Kconfig index 2a3db860bbcf..f618a7bb9d1f 100644 --- a/arch/arm/mach-imx/mx7/Kconfig +++ b/arch/arm/mach-imx/mx7/Kconfig @@ -2,19 +2,19 @@ if ARCH_MX7

config MX7 bool + default y + select ARCH_SUPPORT_PSCI + select CPU_V7_HAS_NONSEC + select CPU_V7_HAS_VIRT select ROM_UNIFIED_SECTIONS select SYSCOUNTER_TIMER - select CPU_V7_HAS_VIRT - select CPU_V7_HAS_NONSEC - select ARCH_SUPPORT_PSCI imply CMD_FUSE - default y

config MX7D + bool select HAS_CAAM select ROM_UNIFIED_SECTIONS imply CMD_FUSE - bool

choice prompt "MX7 board select" @@ -22,31 +22,31 @@ choice

config TARGET_CL_SOM_IMX7 bool "CL-SOM-iMX7" - select MX7D select DM select DM_THERMAL + select MX7D select SUPPORT_SPL

config TARGET_MX7DSABRESD bool "mx7dsabresd" select BOARD_LATE_INIT - select MX7D select DM select DM_THERMAL + select MX7D

config TARGET_PICO_IMX7D bool "pico-imx7d" select BOARD_LATE_INIT - select MX7D select DM select DM_THERMAL + select MX7D

config TARGET_WARP7 bool "warp7" select BOARD_LATE_INIT - select MX7D select DM select DM_THERMAL + select MX7D

config TARGET_COLIBRI_IMX7 bool "Support Colibri iMX7S/iMX7D modules" diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig index 76da6d911ed6..94d9d868f893 100644 --- a/arch/arm/mach-omap2/am33xx/Kconfig +++ b/arch/arm/mach-omap2/am33xx/Kconfig @@ -31,9 +31,11 @@ config TARGET_AM335X_EVM bool "Support am335x_evm" select BOARD_LATE_INIT select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL select TI_I2C_BOARD_DETECT + imply SPL_DM + imply SPL_DM_SEQ_ALIAS imply SPL_ENV_SUPPORT imply SPL_EXT_SUPPORT imply SPL_FAT_SUPPORT @@ -44,15 +46,13 @@ config TARGET_AM335X_EVM imply SPL_LIBGENERIC_SUPPORT imply SPL_MMC_SUPPORT imply SPL_NAND_SUPPORT + imply SPL_OF_LIBFDT imply SPL_POWER_SUPPORT + imply SPL_SEPARATE_BSS imply SPL_SERIAL_SUPPORT + imply SPL_SYS_MALLOC_SIMPLE imply SPL_WATCHDOG_SUPPORT imply SPL_YMODEM_SUPPORT - imply SPL_SYS_MALLOC_SIMPLE - imply SPL_SEPARATE_BSS - imply SPL_DM - imply SPL_DM_SEQ_ALIAS - imply SPL_OF_LIBFDT help This option specifies support for the AM335x GP and HS EVM development platforms. The AM335x @@ -65,30 +65,30 @@ config TARGET_AM335X_BALTOS bool "Support am335x_baltos" select BOARD_LATE_INIT select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL

config TARGET_AM335X_IGEP003X bool "Support am335x_igep003x" select BOARD_LATE_INIT select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL

config TARGET_AM335X_SHC bool "Support am335x based shc board from bosch" select BOARD_LATE_INIT select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL imply CMD_SPL

config TARGET_AM335X_SL50 bool "Support am335x_sl50" select BOARD_LATE_INIT select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL

config TARGET_BAV335X bool "Support bav335x" @@ -122,68 +122,68 @@ config TARGET_CHILIBOARD config TARGET_CM_T335 bool "Support cm_t335" select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL

config TARGET_DRACO bool "Support draco" select BOARD_LATE_INIT select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL

config TARGET_ETAMIN bool "Support etamin" select BOARD_LATE_INIT select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL

config TARGET_PCM051 bool "Support pcm051" select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL

config TARGET_PENGWYN bool "Support pengwyn" select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL

config TARGET_PEPPER bool "Support pepper" select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL

config TARGET_PXM2 bool "Support pxm2" select BOARD_LATE_INIT select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL

config TARGET_RASTABAN bool "Support rastaban" select BOARD_LATE_INIT select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL

config TARGET_RUT bool "Support rut" select BOARD_LATE_INIT select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL

config TARGET_THUBAN bool "Support thuban" select BOARD_LATE_INIT select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL

config TARGET_PDU001 bool "Support PDU001" @@ -258,6 +258,8 @@ endif if AM43XX || AM33XX config ISW_ENTRY_ADDR hex "Address in memory or XIP flash of bootloader entry point" + default 0x402F4000 if AM43XX + default 0x402F0400 if AM33XX help After any reset, the boot ROM on the AM43XX SOC searches the boot media for a valid boot image. @@ -268,11 +270,10 @@ config ISW_ENTRY_ADDR point address depending on the device type (secure/non-secure), boot media (xip/non-xip) and image headers. - default 0x402F4000 if AM43XX - default 0x402F0400 if AM33XX

config PUB_ROM_DATA_SIZE hex "Size in bytes of the L3 SRAM reserved by ROM to store data" + default 0x8400 help During the device boot, the public ROM uses the top of the public L3 OCMC RAM to store r/w data like stack, @@ -283,5 +284,4 @@ config PUB_ROM_DATA_SIZE boot image. Once the ROM transfers control to the boot image, this area is no longer used, and can be reclaimed for run time use by the boot image. - default 0x8400 endif diff --git a/arch/arm/mach-omap2/omap3/Kconfig b/arch/arm/mach-omap2/omap3/Kconfig index 6d714f6cdb2c..9e4227d8266b 100644 --- a/arch/arm/mach-omap2/omap3/Kconfig +++ b/arch/arm/mach-omap2/omap3/Kconfig @@ -23,10 +23,10 @@ choice config TARGET_AM3517_EVM bool "AM3517 EVM" select DM - select DM_SERIAL select DM_GPIO select DM_I2C select DM_MMC + select DM_SERIAL

config TARGET_MT_VENTOUX bool "TeeJet Mt.Ventoux" @@ -36,8 +36,8 @@ config TARGET_MT_VENTOUX config TARGET_OMAP3_BEAGLE bool "TI OMAP3 BeagleBoard" select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL select OMAP3_GPIO_5 select OMAP3_GPIO_6

@@ -56,21 +56,21 @@ config TARGET_CM_T3517 config TARGET_DEVKIT8000 bool "TimLL OMAP3 Devkit8000" select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL

config TARGET_OMAP3_EVM bool "TI OMAP3 EVM" select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL select OMAP3_GPIO_3

config TARGET_OMAP3_IGEP00X0 bool "IGEP" select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL select OMAP3_GPIO_3 select OMAP3_GPIO_5 select OMAP3_GPIO_6 @@ -78,8 +78,8 @@ config TARGET_OMAP3_IGEP00X0 config TARGET_OMAP3_OVERO bool "OMAP35xx Gumstix Overo" select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL select OMAP3_GPIO_2 select OMAP3_GPIO_3 select OMAP3_GPIO_4 @@ -89,8 +89,8 @@ config TARGET_OMAP3_OVERO config TARGET_OMAP3_ZOOM1 bool "TI Zoom1" select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL

config TARGET_AM3517_CRANE bool "am3517_crane" @@ -118,8 +118,8 @@ config TARGET_OMAP3_LOGIC bool "OMAP3 Logic" select BOARD_LATE_INIT select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL select OMAP3_GPIO_3 select OMAP3_GPIO_4 select OMAP3_GPIO_6 @@ -143,14 +143,14 @@ config TARGET_TWISTER config TARGET_OMAP3_CAIRO bool "QUIPOS CAIRO" select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL

config TARGET_SNIPER bool "LG Optimus Black" select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL select OMAP3_GPIO_2 select OMAP3_GPIO_3 select OMAP3_GPIO_4 diff --git a/arch/arm/mach-rmobile/Kconfig.32 b/arch/arm/mach-rmobile/Kconfig.32 index c0b5b2457cb1..dc517350ee19 100644 --- a/arch/arm/mach-rmobile/Kconfig.32 +++ b/arch/arm/mach-rmobile/Kconfig.32 @@ -47,25 +47,25 @@ config TARGET_GOSE bool "Gose board" select DM select DM_SERIAL + select SPL_TINY_MEMSET select SUPPORT_SPL select USE_TINY_PRINTF - select SPL_TINY_MEMSET

config TARGET_KOELSCH bool "Koelsch board" select DM select DM_SERIAL + select SPL_TINY_MEMSET select SUPPORT_SPL select USE_TINY_PRINTF - select SPL_TINY_MEMSET

config TARGET_LAGER bool "Lager board" select DM select DM_SERIAL + select SPL_TINY_MEMSET select SUPPORT_SPL select USE_TINY_PRINTF - select SPL_TINY_MEMSET

config TARGET_KZM9G bool "KZM9D board" @@ -74,33 +74,33 @@ config TARGET_ALT bool "Alt board" select DM select DM_SERIAL + select SPL_TINY_MEMSET select SUPPORT_SPL select USE_TINY_PRINTF - select SPL_TINY_MEMSET

config TARGET_SILK bool "Silk board" select DM select DM_SERIAL + select SPL_TINY_MEMSET select SUPPORT_SPL select USE_TINY_PRINTF - select SPL_TINY_MEMSET

config TARGET_PORTER bool "Porter board" select DM select DM_SERIAL + select SPL_TINY_MEMSET select SUPPORT_SPL select USE_TINY_PRINTF - select SPL_TINY_MEMSET

config TARGET_STOUT bool "Stout board" select DM select DM_SERIAL + select SPL_TINY_MEMSET select SUPPORT_SPL select USE_TINY_PRINTF - select SPL_TINY_MEMSET

endchoice

diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 0fb0c6339018..cd03705b64c0 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -22,6 +22,8 @@ config TEGRA_IVC

config TEGRA_COMMON bool "Tegra common options" + select BINMAN + select BOARD_EARLY_INIT_F select CLK select DM select DM_ETH @@ -35,11 +37,9 @@ config TEGRA_COMMON select DM_SPI select DM_SPI_FLASH select MISC - select SPI select OF_CONTROL + select SPI select VIDCONSOLE_AS_LCD if DM_VIDEO - select BOARD_EARLY_INIT_F - select BINMAN imply CRC32_VERIFY

config TEGRA_NO_BPMP @@ -98,8 +98,8 @@ config TEGRA124

config TEGRA210 bool "Tegra210 family" - select TEGRA_GPIO select TEGRA_ARMV8_COMMON + select TEGRA_GPIO select TEGRA_NO_BPMP

config TEGRA186 diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index c56459345136..1df1ecf72d19 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -11,10 +11,10 @@ choice config TARGET_MICROBLAZE_GENERIC bool "Support microblaze-generic" select BOARD_LATE_INIT - select SUPPORT_SPL - select OF_CONTROL select DM select DM_SERIAL + select OF_CONTROL + select SUPPORT_SPL select SYSRESET

endchoice diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index d07b92d1b442..315d89dbeb3f 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -14,13 +14,13 @@ choice

config TARGET_QEMU_MIPS bool "Support qemu-mips" + select ROM_EXCEPTION_VECTORS select SUPPORTS_BIG_ENDIAN - select SUPPORTS_LITTLE_ENDIAN select SUPPORTS_CPU_MIPS32_R1 select SUPPORTS_CPU_MIPS32_R2 select SUPPORTS_CPU_MIPS64_R1 select SUPPORTS_CPU_MIPS64_R2 - select ROM_EXCEPTION_VECTORS + select SUPPORTS_LITTLE_ENDIAN

config TARGET_MALTA bool "Support malta" @@ -28,98 +28,98 @@ config TARGET_MALTA select DM_SERIAL select DYNAMIC_IO_PORT_BASE select MIPS_CM + select MIPS_L1_CACHE_SHIFT_6 select MIPS_L2_CACHE select OF_CONTROL select OF_ISA_BUS + select ROM_EXCEPTION_VECTORS select SUPPORTS_BIG_ENDIAN - select SUPPORTS_LITTLE_ENDIAN select SUPPORTS_CPU_MIPS32_R1 select SUPPORTS_CPU_MIPS32_R2 select SUPPORTS_CPU_MIPS32_R6 select SUPPORTS_CPU_MIPS64_R1 select SUPPORTS_CPU_MIPS64_R2 select SUPPORTS_CPU_MIPS64_R6 + select SUPPORTS_LITTLE_ENDIAN select SWAP_IO_SPACE - select MIPS_L1_CACHE_SHIFT_6 - select ROM_EXCEPTION_VECTORS

config TARGET_VCT bool "Support vct" + select ROM_EXCEPTION_VECTORS select SUPPORTS_BIG_ENDIAN select SUPPORTS_CPU_MIPS32_R1 select SUPPORTS_CPU_MIPS32_R2 select SYS_MIPS_CACHE_INIT_RAM_LOAD - select ROM_EXCEPTION_VECTORS

config TARGET_DBAU1X00 bool "Support dbau1x00" + select MIPS_TUNE_4KC + select ROM_EXCEPTION_VECTORS select SUPPORTS_BIG_ENDIAN - select SUPPORTS_LITTLE_ENDIAN select SUPPORTS_CPU_MIPS32_R1 select SUPPORTS_CPU_MIPS32_R2 + select SUPPORTS_LITTLE_ENDIAN select SYS_MIPS_CACHE_INIT_RAM_LOAD - select ROM_EXCEPTION_VECTORS - select MIPS_TUNE_4KC

config TARGET_PB1X00 bool "Support pb1x00" - select SUPPORTS_LITTLE_ENDIAN + select MIPS_TUNE_4KC + select ROM_EXCEPTION_VECTORS select SUPPORTS_CPU_MIPS32_R1 select SUPPORTS_CPU_MIPS32_R2 + select SUPPORTS_LITTLE_ENDIAN select SYS_MIPS_CACHE_INIT_RAM_LOAD - select ROM_EXCEPTION_VECTORS - select MIPS_TUNE_4KC

config ARCH_ATH79 bool "Support QCA/Atheros ath79" - select OF_CONTROL select DM + select OF_CONTROL

config ARCH_BMIPS bool "Support BMIPS SoCs" - select OF_CONTROL - select DM select CLK select CPU + select DM + select OF_CONTROL select RAM select SYSRESET

config MACH_PIC32 bool "Support Microchip PIC32" - select OF_CONTROL select DM + select OF_CONTROL

config TARGET_BOSTON bool "Support Boston" select DM select DM_SERIAL - select OF_CONTROL select MIPS_CM select MIPS_L1_CACHE_SHIFT_6 select MIPS_L2_CACHE select OF_BOARD_SETUP + select OF_CONTROL + select ROM_EXCEPTION_VECTORS select SUPPORTS_BIG_ENDIAN - select SUPPORTS_LITTLE_ENDIAN select SUPPORTS_CPU_MIPS32_R1 select SUPPORTS_CPU_MIPS32_R2 select SUPPORTS_CPU_MIPS32_R6 select SUPPORTS_CPU_MIPS64_R1 select SUPPORTS_CPU_MIPS64_R2 select SUPPORTS_CPU_MIPS64_R6 - select ROM_EXCEPTION_VECTORS + select SUPPORTS_LITTLE_ENDIAN

config TARGET_XILFPGA bool "Support Imagination Xilfpga" - select OF_CONTROL select DM - select DM_SERIAL - select DM_GPIO select DM_ETH - select SUPPORTS_LITTLE_ENDIAN - select SUPPORTS_CPU_MIPS32_R1 - select SUPPORTS_CPU_MIPS32_R2 + select DM_GPIO + select DM_SERIAL select MIPS_L1_CACHE_SHIFT_4 + select OF_CONTROL select ROM_EXCEPTION_VECTORS + select SUPPORTS_CPU_MIPS32_R1 + select SUPPORTS_CPU_MIPS32_R2 + select SUPPORTS_LITTLE_ENDIAN help This supports IMGTEC MIPSfpga platform

diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig index 05d29d2fd95f..385a7a6e2172 100644 --- a/arch/powerpc/cpu/mpc83xx/Kconfig +++ b/arch/powerpc/cpu/mpc83xx/Kconfig @@ -26,8 +26,8 @@ config TARGET_MPC8308RDB

config TARGET_MPC8313ERDB bool "Support MPC8313ERDB" - select SUPPORT_SPL select BOARD_EARLY_INIT_F + select SUPPORT_SPL

config TARGET_MPC8315ERDB bool "Support MPC8315ERDB" @@ -42,10 +42,10 @@ config TARGET_MPC832XEMDS

config TARGET_MPC8349EMDS bool "Support MPC8349EMDS" + select BOARD_EARLY_INIT_F select SYS_FSL_DDR - select SYS_FSL_HAS_DDR2 select SYS_FSL_DDR_BE - select BOARD_EARLY_INIT_F + select SYS_FSL_HAS_DDR2

config TARGET_MPC8349ITX bool "Support MPC8349ITX" diff --git a/cmd/Kconfig b/cmd/Kconfig index b359ac7118b0..e1c45eeb5ce4 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -152,8 +152,8 @@ config CMD_BDI

config CMD_CONFIG bool "config" - select BUILD_BIN2C default SANDBOX + select BUILD_BIN2C help Print ".config" contents.

@@ -429,8 +429,8 @@ config CMD_BINOP

config CMD_CRC32 bool "crc32" - select HASH default y + select HASH help Compute CRC32.

@@ -737,9 +737,9 @@ config CMD_GPIO

config CMD_GPT bool "GPT (GUID Partition Table) command" - select PARTITION_UUIDS select EFI_PARTITION select HAVE_BLOCK_DEVICE + select PARTITION_UUIDS imply RANDOM_UUID help Enable the 'gpt' command to ready and write GPT style partition @@ -899,8 +899,8 @@ config CMD_ONENAND

config CMD_PART bool "part" - select PARTITION_UUIDS select HAVE_BLOCK_DEVICE + select PARTITION_UUIDS help Read and display information about the partition table on various media. @@ -1797,10 +1797,10 @@ endmenu

config CMD_UBI tristate "Enable UBI - Unsorted block images commands" + default y if NAND_SUNXI + select CMD_MTDPARTS select CRC32 select MTD_UBI - select CMD_MTDPARTS - default y if NAND_SUNXI help UBI is a software layer above MTD layer which admits use of LVM-like logical volumes on top of MTD devices, hides some complexities of @@ -1812,9 +1812,9 @@ config CMD_UBI config CMD_UBIFS tristate "Enable UBIFS - Unsorted block images filesystem commands" depends on CMD_UBI + default y if CMD_UBI select CRC32 select LZO - default y if CMD_UBI help UBIFS is a file system for flash devices which works on top of UBI.