Replace hardcoded boot i2c bus num and address by existing macros when generating env for CONFIG_EXTRA_ENV_SETTINGS.
Same macros are used in U-Boot board code when reading information from boot i2c data.
Signed-off-by: Pali Rohár pali@kernel.org --- include/configs/p1_p2_rdb_pc.h | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 7b5a8dd9e509..cb3b1a1da05d 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -568,28 +568,28 @@
#ifdef __SW_BOOT_NOR #define __NOR_RST_CMD \ -norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \ -i2c mw 18 3 __SW_BOOT_MASK 1; reset +norboot=i2c dev CONFIG_SYS_SPD_BUS_NUM; i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 1 __SW_BOOT_NOR 1; \ +i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 3 __SW_BOOT_MASK 1; reset #endif #ifdef __SW_BOOT_SPI #define __SPI_RST_CMD \ -spiboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SPI 1; \ -i2c mw 18 3 __SW_BOOT_MASK 1; reset +spiboot=i2c dev CONFIG_SYS_SPD_BUS_NUM; i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 1 __SW_BOOT_SPI 1; \ +i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 3 __SW_BOOT_MASK 1; reset #endif #ifdef __SW_BOOT_SD #define __SD_RST_CMD \ -sdboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SD 1; \ -i2c mw 18 3 __SW_BOOT_MASK 1; reset +sdboot=i2c dev CONFIG_SYS_SPD_BUS_NUM; i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 1 __SW_BOOT_SD 1; \ +i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 3 __SW_BOOT_MASK 1; reset #endif #ifdef __SW_BOOT_NAND #define __NAND_RST_CMD \ -nandboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NAND 1; \ -i2c mw 18 3 __SW_BOOT_MASK 1; reset +nandboot=i2c dev CONFIG_SYS_SPD_BUS_NUM; i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 1 __SW_BOOT_NAND 1; \ +i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 3 __SW_BOOT_MASK 1; reset #endif #ifdef __SW_BOOT_PCIE #define __PCIE_RST_CMD \ -pciboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_PCIE 1; \ -i2c mw 18 3 __SW_BOOT_MASK 1; reset +pciboot=i2c dev CONFIG_SYS_SPD_BUS_NUM; i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 1 __SW_BOOT_PCIE 1; \ +i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 3 __SW_BOOT_MASK 1; reset #endif
#define CONFIG_EXTRA_ENV_SETTINGS \ @@ -616,9 +616,9 @@ i2c mw 18 3 __SW_BOOT_MASK 1; reset "nandbootaddr=100000\0" \ "nandfdtaddr=80000\0" \ "ramdisk_size=120000\0" \ -"map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \ -"map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \ __VSCFW_ADDR \ +"map_lowernorbank=i2c dev "__stringify(CONFIG_SYS_SPD_BUS_NUM)"; i2c mw "__stringify(CONFIG_SYS_I2C_PCA9557_ADDR)" 1 02 1; i2c mw "__stringify(CONFIG_SYS_I2C_PCA9557_ADDR)" 3 fd 1\0" \ +"map_uppernorbank=i2c dev "__stringify(CONFIG_SYS_SPD_BUS_NUM)"; i2c mw "__stringify(CONFIG_SYS_I2C_PCA9557_ADDR)" 1 00 1; i2c mw "__stringify(CONFIG_SYS_I2C_PCA9557_ADDR)" 3 fd 1\0" \ __stringify(__NOR_RST_CMD)"\0" \ __stringify(__SPI_RST_CMD)"\0" \ __stringify(__SD_RST_CMD)"\0" \