Commit 'b4b9a00ed593 ("Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig")' replaces CONFIG_SYS_FDT_BASE by CONFIG_SYS_SPL_ARGS_ADDR. As CONFIG_SYS_SPL_ARGS_ADDR enables additional code when enable, it increases SPL size over the initial 0x8000 limit. Increase the SPL size to 0x9000 to fix SPL boot. Set SPL_SIZE_LIMIT to 0x9000 to avoid similar issue in the future.
Fixes 'b4b9a00ed593 ("Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig")'
Signed-off-by: Patrice Chotard patrice.chotard@foss.st.com ---
(no changes since v1)
configs/stm32f746-disco_spl_defconfig | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/configs/stm32f746-disco_spl_defconfig b/configs/stm32f746-disco_spl_defconfig index e7b1acc433..5e8a8aaf3c 100644 --- a/configs/stm32f746-disco_spl_defconfig +++ b/configs/stm32f746-disco_spl_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_STM32=y -CONFIG_SYS_TEXT_BASE=0x08008000 +CONFIG_SYS_TEXT_BASE=0x08009000 CONFIG_SYS_MALLOC_LEN=0x100000 CONFIG_SYS_MALLOC_F_LEN=0xE00 CONFIG_SPL_GPIO=y @@ -13,10 +13,11 @@ CONFIG_SPL_TEXT_BASE=0x8000000 CONFIG_SYS_PROMPT="U-Boot > " CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y +CONFIG_SPL_SIZE_LIMIT=0x9000 CONFIG_STM32F7=y CONFIG_TARGET_STM32F746_DISCO=y CONFIG_SPL=y -CONFIG_SYS_LOAD_ADDR=0x8008000 +CONFIG_SYS_LOAD_ADDR=0x8009000 CONFIG_BUILD_TARGET="u-boot-with-spl.bin" CONFIG_DISTRO_DEFAULTS=y CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y @@ -29,7 +30,7 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_LATE_INIT=y -CONFIG_SPL_PAD_TO=0x8000 +CONFIG_SPL_PAD_TO=0x9000 CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y