[U-Boot] [PATCH 2/4] sandbox: dts: Sort the test.dts file a little

There are some core test nodes near the beginning of the file which should be grouped together. But for other nodes, let's sort them.

Signed-off-by: Simon Glass sjg@chromium.org ---

arch/sandbox/dts/test.dts | 48 +++++++++++++++++++++++------------------------ 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts index 1bc3ca0..52ff436 100644 --- a/arch/sandbox/dts/test.dts +++ b/arch/sandbox/dts/test.dts @@ -8,9 +8,11 @@

aliases { console = &uart0; + eth0 = "/eth@10002000"; + eth5 = &eth_5; i2c0 = "/i2c@0"; - spi0 = "/spi@0"; pci0 = &pci; + spi0 = "/spi@0"; testfdt6 = "/e-test"; testbus3 = "/some-bus"; testfdt0 = "/some-bus/c-test@0"; @@ -18,18 +20,11 @@ testfdt3 = "/b-test"; testfdt5 = "/some-bus/c-test@5"; testfdt8 = "/a-test"; - eth0 = "/eth@10002000"; - eth5 = &eth_5; usb0 = &usb_0; usb1 = &usb_1; usb2 = &usb_2; };

- uart0: serial { - compatible = "sandbox,serial"; - u-boot,dm-pre-reloc; - }; - a-test { reg = <0>; compatible = "denx,u-boot-fdt-test"; @@ -108,6 +103,24 @@ compatible = "denx,u-boot-fdt-test"; };

+ eth@10002000 { + compatible = "sandbox,eth"; + reg = <0x10002000 0x1000>; + fake-host-hwaddr = <0x00 0x00 0x66 0x44 0x22 0x00>; + }; + + eth_5: eth@10003000 { + compatible = "sandbox,eth"; + reg = <0x10003000 0x1000>; + fake-host-hwaddr = <0x00 0x00 0x66 0x44 0x22 0x11>; + }; + + eth@10004000 { + compatible = "sandbox,eth"; + reg = <0x10004000 0x1000>; + fake-host-hwaddr = <0x00 0x00 0x66 0x44 0x22 0x22>; + }; + gpio_a: base-gpios { compatible = "sandbox,gpio"; gpio-controller; @@ -175,22 +188,9 @@ }; };

- eth@10002000 { - compatible = "sandbox,eth"; - reg = <0x10002000 0x1000>; - fake-host-hwaddr = <0x00 0x00 0x66 0x44 0x22 0x00>; - }; - - eth_5: eth@10003000 { - compatible = "sandbox,eth"; - reg = <0x10003000 0x1000>; - fake-host-hwaddr = <0x00 0x00 0x66 0x44 0x22 0x11>; - }; - - eth@10004000 { - compatible = "sandbox,eth"; - reg = <0x10004000 0x1000>; - fake-host-hwaddr = <0x00 0x00 0x66 0x44 0x22 0x22>; + uart0: serial { + compatible = "sandbox,serial"; + u-boot,dm-pre-reloc; };

usb_0: usb@0 {