On Fri, 19 Feb 2021 00:26:16 +0100 Giulio Benetti giulio.benetti@benettiengineering.com wrote:
Hi,
From: Giulio Benetti giulio.benetti@micronovasrl.com
Signed-off-by: Giulio Benetti giulio.benetti@micronovasrl.com Signed-off-by: Giulio Benetti giulio.benetti@benettiengineering.com
arch/arm/dts/sun7i-a20.dtsi | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/arch/arm/dts/sun7i-a20.dtsi b/arch/arm/dts/sun7i-a20.dtsi index a013805831..8bf1921500 100644 --- a/arch/arm/dts/sun7i-a20.dtsi +++ b/arch/arm/dts/sun7i-a20.dtsi @@ -943,6 +943,11 @@ function = "uart1"; };
uart2_pa_pins: uart2-pa-pins {pins = "PA2", "PA3";function = "uart2";};
This is already in the Linux .dtsi, so we just need to sync that (and probably all the sun7i-a20 .dts files) to U-Boot. There are some changes around the PHY nodes, so we need to check if that affects the operation of the U-Boot GMAC driver.
Cheers, Andre
uart2_pi_pins: uart2-pi-pins { pins = "PI18", "PI19"; function = "uart2";