Power to some devices is controlled by GPIOs. Add a way to generate ACPI code to enable and disable a GPIO so that this can be handled within an ACPI method.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v1: None
include/acpi/acpigen.h | 12 +++++++ lib/acpi/acpigen.c | 80 ++++++++++++++++++++++++++++++++++++++++++ test/dm/acpigen.c | 54 ++++++++++++++++++++++++++++ 3 files changed, 146 insertions(+)
diff --git a/include/acpi/acpigen.h b/include/acpi/acpigen.h index 7d9a02805b..1205836f58 100644 --- a/include/acpi/acpigen.h +++ b/include/acpi/acpigen.h @@ -13,6 +13,7 @@ #include <linux/types.h>
struct acpi_ctx; +struct acpi_gpio;
/* ACPI Op/Prefix codes */ enum { @@ -332,4 +333,15 @@ void acpigen_write_power_res(struct acpi_ctx *ctx, const char *name, uint level, uint order, const char *const dev_states[], size_t dev_states_count);
+/* + * Helper functions for enabling/disabling Tx GPIOs based on the GPIO + * polarity. These functions end up calling acpigen_soc_{set,clear}_tx_gpio to + * make callbacks into SoC acpigen code. + * + * Returns 0 on success and -1 on error. + */ +int acpigen_set_enable_tx_gpio(struct acpi_ctx *ctx, u32 tx_state_val, + const char *dw0_name, struct acpi_gpio *gpio, + bool enable); + #endif diff --git a/lib/acpi/acpigen.c b/lib/acpi/acpigen.c index 265048e656..19b531e872 100644 --- a/lib/acpi/acpigen.c +++ b/lib/acpi/acpigen.c @@ -11,6 +11,7 @@ #include <common.h> #include <dm.h> #include <acpi/acpigen.h> +#include <acpi/acpi_device.h> #include <dm/acpi.h>
/* CPU path format */ @@ -393,3 +394,82 @@ void acpigen_write_debug_string(struct acpi_ctx *ctx, const char *str) acpigen_write_string(ctx, str); acpigen_emit_ext_op(ctx, DEBUG_OP); } + +/** + * acpigen_get_dw0_in_local5() - Generate code to put dw0 cfg0 in local5 + * + * @ctx: ACPI context pointer + * @dw0_name: Name to use (e.g. "\_SB.GPC0") + * @addr: GPIO pin configuration register address + * + * Store (_SB.GPC0 (addr), Local5) + * _SB.GPC0 is used to read cfg0 value from dw0. It is typically defined in + * the board's gpiolib.asl + */ +static void acpigen_get_dw0_in_local5(struct acpi_ctx *ctx, + const char *dw0_name, ulong addr) +{ + acpigen_write_store(ctx); + acpigen_emit_namestring(ctx, dw0_name); + acpigen_write_integer(ctx, addr); + acpigen_emit_byte(ctx, LOCAL5_OP); +} + +/** + * acpigen_set_gpio_val() - Set value of TX GPIO to on/off + * + * @ctx: ACPI context pointer + * @dw0_name: Name to use (e.g. "\_SB.GPC0") + * @gpio_num: GPIO number to adjust + * @vaL: true to set on, false to set off + */ +static int acpigen_set_gpio_val(struct acpi_ctx *ctx, u32 tx_state_val, + const char *dw0_name, struct acpi_gpio *gpio, + bool val) +{ + acpigen_get_dw0_in_local5(ctx, dw0_name, gpio->pin0_addr); + + if (val) { + /* Or (Local5, PAD_CFG0_TX_STATE, Local5) */ + acpigen_write_or(ctx, LOCAL5_OP, tx_state_val, LOCAL5_OP); + } else { + /* Not (PAD_CFG0_TX_STATE, Local6) */ + acpigen_write_not(ctx, tx_state_val, LOCAL6_OP); + + /* And (Local5, Local6, Local5) */ + acpigen_write_and(ctx, LOCAL5_OP, LOCAL6_OP, LOCAL5_OP); + } + + /* + * _SB.SPC0 (addr, Local5) + * _SB.SPC0 is used to write cfg0 value in dw0. It is defined in + * gpiolib.asl. + */ + acpigen_emit_namestring(ctx, dw0_name); + acpigen_write_integer(ctx, gpio->pin0_addr); + acpigen_emit_byte(ctx, LOCAL5_OP); + + return 0; +} + +/* + * Helper functions for enabling/disabling Tx GPIOs based on the GPIO + * polarity. These functions end up calling acpigen_{set,clear}_tx_gpio to + * make callbacks into SoC acpigen code. + * + * Returns 0 on success and -1 on error. + */ +int acpigen_set_enable_tx_gpio(struct acpi_ctx *ctx, u32 tx_state_val, + const char *dw0_name, struct acpi_gpio *gpio, + bool enable) +{ + bool set; + int ret; + + set = gpio->polarity == ACPI_GPIO_ACTIVE_HIGH ? enable : !enable; + ret = acpigen_set_gpio_val(ctx, tx_state_val, dw0_name, gpio, set); + if (ret) + return log_msg_ret("call", ret); + + return 0; +} diff --git a/test/dm/acpigen.c b/test/dm/acpigen.c index c92f6cdb0b..06bdd63739 100644 --- a/test/dm/acpigen.c +++ b/test/dm/acpigen.c @@ -737,3 +737,57 @@ static int dm_test_acpi_power_res(struct unit_test_state *uts) return 0; } DM_TEST(dm_test_acpi_power_res, 0); + +/* Test writing ACPI code to toggle a GPIO */ +static int dm_test_acpi_gpio_toggle(struct unit_test_state *uts) +{ + const uint addr = 0x80012; + const int txbit = BIT(2); + struct gpio_desc desc; + struct acpi_gpio gpio; + struct acpi_ctx *ctx; + struct udevice *dev; + u8 *ptr; + + ut_assertok(alloc_context(&ctx)); + + ut_assertok(uclass_get_device(UCLASS_TEST_FDT, 0, &dev)); + ut_asserteq_str("a-test", dev->name); + ut_assertok(gpio_request_by_name(dev, "test2-gpios", 2, &desc, 0)); + ut_assertok(gpio_get_acpi(&desc, &gpio)); + + /* Spot-check the results - see sb_gpio_get_acpi() */ + ptr = acpigen_get_current(ctx); + acpigen_set_enable_tx_gpio(ctx, txbit, "\_SB.GPC0", &gpio, true); + acpigen_set_enable_tx_gpio(ctx, txbit, "\_SB.GPC0", &gpio, false); + + /* Since this GPIO is active low, we expect it to be cleared here */ + ut_asserteq(STORE_OP, ptr[0]); + ut_asserteq_strn("_SB_GPC0", (char *)ptr + 3); + ut_asserteq(addr + desc.offset, get_unaligned((u32 *)(ptr + 0xc))); + ut_asserteq(LOCAL5_OP, ptr[0x10]); + + ut_asserteq(NOT_OP, ptr[0x11]); + ut_asserteq(txbit, ptr[0x12]); + ut_asserteq(AND_OP, ptr[0x14]); + ut_asserteq_strn("_SB_GPC0", (char *)ptr + 0x1a); + ut_asserteq(addr + desc.offset, get_unaligned((u32 *)(ptr + 0x23))); + ut_asserteq(LOCAL5_OP, ptr[0x27]); + + /* Now the second one, which should be set */ + ut_asserteq_strn("_SB_GPC0", (char *)ptr + 0x2b); + ut_asserteq(addr + desc.offset, get_unaligned((u32 *)(ptr + 0x34))); + ut_asserteq(LOCAL5_OP, ptr[0x38]); + + ut_asserteq(OR_OP, ptr[0x39]); + ut_asserteq(txbit, ptr[0x3b]); + ut_asserteq_strn("_SB_GPC0", (char *)ptr + 0x3f); + ut_asserteq(addr + desc.offset, get_unaligned((u32 *)(ptr + 0x48))); + ut_asserteq(LOCAL5_OP, ptr[0x4c]); + ut_asserteq(0x4d, acpigen_get_current(ctx) - ptr); + + free_context(&ctx); + + return 0; +} +DM_TEST(dm_test_acpi_gpio_toggle, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);