[v4 06/12] arm: dts: aspeed: Update SPI flash node settings

24 May 2022

For both AST2500 and AST2600, there are three
SPI controllers, FMC(Firmware Memory Controller),
SPI1 and SPI2. The clock source is HCLK. Following
is the basic information for ASPEED SPI controller.
AST2500:
  - FMC:
      CS number: 3
      controller reg: 0x1e620000 - 0x1e62ffff
      decoded address: 0x20000000 - 0x2fffffff
- SPI1:
      CS number: 2
      controller reg: 0x1e630000 - 0x1e630fff
      decoded address: 0x30000000 - 0x37ffffff
- SPI2:
      CS number: 2
      controller reg: 0x1e631000 - 0x1e631fff
      decoded address: 0x38000000 - 0x3fffffff
AST2600:
  - FMC:
      CS number: 3
      controller reg: 0x1e620000 - 0x1e62ffff
      decoded address: 0x20000000 - 0x2fffffff
- SPI1:
      CS number: 2
      controller reg: 0x1e630000 - 0x1e630fff
      decoded address: 0x30000000 - 0x3fffffff
- SPI2:
      CS number: 3
      controller reg: 0x1e631000 - 0x1e631fff
      decoded address: 0x50000000 - 0x5fffffff
Signed-off-by: Chin-Ting Kuo chin-ting_kuo@aspeedtech.com
---
 arch/arm/dts/ast2500-evb.dts | 33 +++++++++++++++++++++++++++++++++
 arch/arm/dts/ast2500.dtsi    | 23 ++++++++++++++++-------
 arch/arm/dts/ast2600-evb.dts |  8 --------
 arch/arm/dts/ast2600.dtsi    | 34 +++++++++++++++++++---------------
 4 files changed, 68 insertions(+), 30 deletions(-)

diff --git a/arch/arm/dts/ast2500-evb.dts b/arch/arm/dts/ast2500-evb.dts
index 4796ed445f..c6b7675902 100644
--- a/arch/arm/dts/ast2500-evb.dts
+++ b/arch/arm/dts/ast2500-evb.dts
@@ -73,3 +73,36 @@
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_sd2_default>;
 };
+
+&fmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fwspics1_default>;
+
+	flash@0 {
+		status = "okay";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+	};
+
+	flash@1 {
+		status = "okay";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1cs1_default>;
+
+	flash@0 {
+		status = "okay";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+	};
+};
diff --git a/arch/arm/dts/ast2500.dtsi b/arch/arm/dts/ast2500.dtsi
index ee66ef6704..d78a53aeb7 100644
--- a/arch/arm/dts/ast2500.dtsi
+++ b/arch/arm/dts/ast2500.dtsi
@@ -57,23 +57,26 @@
    	ranges;
fmc: flash-controller@1e620000 {
-			reg = < 0x1e620000 0xc4
-				0x20000000 0x10000000 >;
+			reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
    		#address-cells = <1>;
    		#size-cells = <0>;
    		compatible = "aspeed,ast2500-fmc";
+			clocks = <&scu ASPEED_CLK_AHB>;
+			num-cs = <3>;
    		status = "disabled";
-			interrupts = <19>;
+
    		flash@0 {
    			reg = < 0 >;
    			compatible = "jedec,spi-nor";
    			status = "disabled";
    		};
+
    		flash@1 {
    			reg = < 1 >;
    			compatible = "jedec,spi-nor";
    			status = "disabled";
    		};
+
    		flash@2 {
    			reg = < 2 >;
    			compatible = "jedec,spi-nor";
@@ -82,17 +85,20 @@
    	};
spi1: flash-controller@1e630000 {
-			reg = < 0x1e630000 0xc4
-				0x30000000 0x08000000 >;
+			reg = <0x1e630000 0xc4>, <0x30000000 0x08000000>;
    		#address-cells = <1>;
    		#size-cells = <0>;
    		compatible = "aspeed,ast2500-spi";
+			clocks = <&scu ASPEED_CLK_AHB>;
+			num-cs = <2>;
    		status = "disabled";
+
    		flash@0 {
    			reg = < 0 >;
    			compatible = "jedec,spi-nor";
    			status = "disabled";
    		};
+
    		flash@1 {
    			reg = < 1 >;
    			compatible = "jedec,spi-nor";
@@ -101,17 +107,20 @@
    	};
spi2: flash-controller@1e631000 {
-			reg = < 0x1e631000 0xc4
-				0x38000000 0x08000000 >;
+			reg = <0x1e631000 0xc4>, <0x38000000 0x08000000>;
    		#address-cells = <1>;
    		#size-cells = <0>;
    		compatible = "aspeed,ast2500-spi";
+			clocks = <&scu ASPEED_CLK_AHB>;
+			num-cs = <2>;
    		status = "disabled";
+
    		flash@0 {
    			reg = < 0 >;
    			compatible = "jedec,spi-nor";
    			status = "disabled";
    		};
+
    		flash@1 {
    			reg = < 1 >;
    			compatible = "jedec,spi-nor";
diff --git a/arch/arm/dts/ast2600-evb.dts b/arch/arm/dts/ast2600-evb.dts
index 0d65054313..c1965e9093 100644
--- a/arch/arm/dts/ast2600-evb.dts
+++ b/arch/arm/dts/ast2600-evb.dts
@@ -72,12 +72,10 @@
&fmc {
    status = "okay";
-
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_fmcquad_default>;
flash@0 {
-		compatible = "spi-flash", "sst,w25q256";
    	status = "okay";
    	spi-max-frequency = <50000000>;
    	spi-tx-bus-width = <4>;
@@ -85,7 +83,6 @@
    };
flash@1 {
-		compatible = "spi-flash", "sst,w25q256";
    	status = "okay";
    	spi-max-frequency = <50000000>;
    	spi-tx-bus-width = <4>;
@@ -93,7 +90,6 @@
    };
flash@2 {
-		compatible = "spi-flash", "sst,w25q256";
    	status = "okay";
    	spi-max-frequency = <50000000>;
    	spi-tx-bus-width = <4>;
@@ -103,14 +99,12 @@
&spi1 {
    status = "okay";
-
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_spi1_default &pinctrl_spi1abr_default
    		&pinctrl_spi1cs1_default &pinctrl_spi1wp_default
    		&pinctrl_spi1wp_default &pinctrl_spi1quad_default>;
flash@0 {
-		compatible = "spi-flash", "sst,w25q256";
    	status = "okay";
    	spi-max-frequency = <50000000>;
    	spi-tx-bus-width = <4>;
@@ -120,13 +114,11 @@
&spi2 {
    status = "okay";
-
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_spi2_default &pinctrl_spi2cs1_default
    		&pinctrl_spi2cs2_default &pinctrl_spi2quad_default>;
flash@0 {
-		compatible = "spi-flash", "sst,w25q256";
    	status = "okay";
    	spi-max-frequency = <50000000>;
    	spi-tx-bus-width = <4>;
diff --git a/arch/arm/dts/ast2600.dtsi b/arch/arm/dts/ast2600.dtsi
index 64074309b7..dd36f55f20 100644
--- a/arch/arm/dts/ast2600.dtsi
+++ b/arch/arm/dts/ast2600.dtsi
@@ -129,74 +129,78 @@
    	};
fmc: flash-controller@1e620000 {
-			reg = < 0x1e620000 0xc4
-				0x20000000 0x10000000 >;
+			reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
    		#address-cells = <1>;
    		#size-cells = <0>;
    		compatible = "aspeed,ast2600-fmc";
    		status = "disabled";
-			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
    		clocks = <&scu ASPEED_CLK_AHB>;
    		num-cs = <3>;
+
    		flash@0 {
-				reg = < 0 >;
+				reg = <0>;
    			compatible = "jedec,spi-nor";
    			status = "disabled";
    		};
+
    		flash@1 {
-				reg = < 1 >;
+				reg = <1>;
    			compatible = "jedec,spi-nor";
    			status = "disabled";
    		};
+
    		flash@2 {
-				reg = < 2 >;
+				reg = <2>;
    			compatible = "jedec,spi-nor";
    			status = "disabled";
    		};
    	};
spi1: flash-controller@1e630000 {
-			reg = < 0x1e630000 0xc4
-				0x30000000 0x08000000 >;
+			reg = <0x1e630000 0xc4>, <0x30000000 0x10000000>;
    		#address-cells = <1>;
    		#size-cells = <0>;
    		compatible = "aspeed,ast2600-spi";
    		clocks = <&scu ASPEED_CLK_AHB>;
    		num-cs = <2>;
    		status = "disabled";
+
    		flash@0 {
-				reg = < 0 >;
+				reg = <0>;
    			compatible = "jedec,spi-nor";
    			status = "disabled";
    		};
+
    		flash@1 {
-				reg = < 1 >;
+				reg = <1>;
    			compatible = "jedec,spi-nor";
    			status = "disabled";
    		};
    	};
spi2: flash-controller@1e631000 {
-			reg = < 0x1e631000 0xc4
-				0x50000000 0x08000000 >;
+			reg = <0x1e631000 0xc4>, <0x50000000 0x10000000>;
    		#address-cells = <1>;
    		#size-cells = <0>;
    		compatible = "aspeed,ast2600-spi";
    		clocks = <&scu ASPEED_CLK_AHB>;
    		num-cs = <3>;
    		status = "disabled";
+
    		flash@0 {
-				reg = < 0 >;
+				reg = <0>;
    			compatible = "jedec,spi-nor";
    			status = "disabled";
    		};
+
    		flash@1 {
-				reg = < 1 >;
+				reg = <1>;
    			compatible = "jedec,spi-nor";
    			status = "disabled";
    		};
+
    		flash@2 {
-				reg = < 2 >;
+				reg = <2>;
    			compatible = "jedec,spi-nor";
    			status = "disabled";
    		};
-- 
2.25.1


    