Re: [U-Boot] [PATCH] arm: omap4: panda: Add reading of the board revision

On Wed, Jun 12, 2013 at 12:54:27PM -0500, Dan Murphy wrote:

Detect if we are running on a panda revision A1-A6, or an ES panda board. This can be done by reading the level of GPIOs and checking the processor revisions. This should result in: Panda 4430: GPIO171, GPIO101, GPIO182: 0 1 1 => A1-A5 GPIO171, GPIO101, GPIO182: 1 0 1 => A6 Panda ES: GPIO2, GPIO3, GPIO171, GPIO48, GPIO182: 0 0 0 1 1 => B1/B2 GPIO2, GPIO3, GPIO171, GPIO48, GPIO182: 0 0 1 1 1 => B3

Set the board name appropriately for the board revision that is detected.

Update the findfdt macro to load the a4 device tree binary.

Signed-off-by: Dan Murphy dmurphy@ti.com

Running checkpatch.pl: total: 0 errors, 7 warnings, 1 checks, 97 lines checked

Please fix, thanks.