This patch is a preparation for add a new soc fot mtmips.
Move all mt7628 related Kconfig (boards and UART selection) into mt7628 subdirectory and make sure the top directory of mtmips contains only selection for SoCs.
Reviewed-by: Stefan Roese sr@denx.de Signed-off-by: Weijie Gao weijie.gao@mediatek.com --- v2 changes: none --- arch/mips/mach-mtmips/Kconfig | 53 +--------------------------- arch/mips/mach-mtmips/mt7628/Kconfig | 53 ++++++++++++++++++++++++++++ 2 files changed, 54 insertions(+), 52 deletions(-) create mode 100644 arch/mips/mach-mtmips/mt7628/Kconfig
diff --git a/arch/mips/mach-mtmips/Kconfig b/arch/mips/mach-mtmips/Kconfig index 737de2cb8e..7c07430a0c 100644 --- a/arch/mips/mach-mtmips/Kconfig +++ b/arch/mips/mach-mtmips/Kconfig @@ -58,57 +58,6 @@ config SOC_MT7628
endchoice
-choice - prompt "Board select" - -config BOARD_GARDENA_SMART_GATEWAY_MT7688 - bool "GARDENA smart Gateway" - depends on SOC_MT7628 - select BOARD_LATE_INIT - help - GARDENA smart Gateway boards have a MT7688 SoC with 128 MiB of RAM - and 8 MiB of flash (SPI NOR) and additional SPI NAND storage. - -config BOARD_LINKIT_SMART_7688 - bool "LinkIt Smart 7688" - depends on SOC_MT7628 - help - Seeed LinkIt Smart 7688 boards have a MT7688 SoC with 128 MiB of RAM - and 32 MiB of flash (SPI). - Between its different peripherals there's an integrated switch with 4 - ethernet ports, 1 USB port, 1 UART, GPIO buttons and LEDs, and - a MT7688 (PCIe). - -config BOARD_MT7628_RFB - bool "MediaTek MT7628 RFB" - depends on SOC_MT7628 - help - The reference design of MT7628. The board has 128 MiB DDR2, 8 MiB - SPI-NOR flash, 1 built-in switch with 5 ports, 1 UART, 1 USB host, - 1 SDXC, 1 PCIe socket and JTAG pins. - -config BOARD_VOCORE2 - bool "VoCore2" - depends on SOC_MT7628 - select SPL_SERIAL_SUPPORT - select SPL_UART2_SPIS_PINMUX - help - VoCore VoCore2 board has a MT7628 SoC with 128 MiB of RAM - and 16 MiB of flash (SPI). - -endchoice - -config SPL_UART2_SPIS_PINMUX - bool "Use alternative pinmux for UART2 in SPL stage" - depends on SPL_SERIAL_SUPPORT - default n - help - Select this if the UART2 of your board is connected to GPIO 16/17 - (shared with SPIS) rather than the usual GPIO 20/21. - -source "board/gardena/smart-gateway-mt7688/Kconfig" -source "board/mediatek/mt7628/Kconfig" -source "board/seeed/linkit-smart-7688/Kconfig" -source "board/vocore/vocore2/Kconfig" +source "arch/mips/mach-mtmips/mt7628/Kconfig"
endmenu diff --git a/arch/mips/mach-mtmips/mt7628/Kconfig b/arch/mips/mach-mtmips/mt7628/Kconfig new file mode 100644 index 0000000000..e3f56e782e --- /dev/null +++ b/arch/mips/mach-mtmips/mt7628/Kconfig @@ -0,0 +1,53 @@ + +if SOC_MT7628 + +choice + prompt "Board select" + +config BOARD_GARDENA_SMART_GATEWAY_MT7688 + bool "GARDENA smart Gateway" + select BOARD_LATE_INIT + help + GARDENA smart Gateway boards have a MT7688 SoC with 128 MiB of RAM + and 8 MiB of flash (SPI NOR) and additional SPI NAND storage. + +config BOARD_LINKIT_SMART_7688 + bool "LinkIt Smart 7688" + help + Seeed LinkIt Smart 7688 boards have a MT7688 SoC with 128 MiB of RAM + and 32 MiB of flash (SPI). + Between its different peripherals there's an integrated switch with 4 + ethernet ports, 1 USB port, 1 UART, GPIO buttons and LEDs, and + a MT7688 (PCIe). + +config BOARD_MT7628_RFB + bool "MediaTek MT7628 RFB" + help + The reference design of MT7628. The board has 128 MiB DDR2, 8 MiB + SPI-NOR flash, 1 built-in switch with 5 ports, 1 UART, 1 USB host, + 1 SDXC, 1 PCIe socket and JTAG pins. + +config BOARD_VOCORE2 + bool "VoCore2" + select SPL_SERIAL_SUPPORT + select SPL_UART2_SPIS_PINMUX + help + VoCore VoCore2 board has a MT7628 SoC with 128 MiB of RAM + and 16 MiB of flash (SPI). + +endchoice + +config SPL_UART2_SPIS_PINMUX + bool "Use alternative pinmux for UART2 in SPL stage" + depends on SPL_SERIAL_SUPPORT + default n + help + Select this if the UART2 of your board is connected to GPIO 16/17 + (shared with SPIS) rather than the usual GPIO 20/21. + +source "board/gardena/smart-gateway-mt7688/Kconfig" +source "board/mediatek/mt7628/Kconfig" +source "board/seeed/linkit-smart-7688/Kconfig" +source "board/vocore/vocore2/Kconfig" + +endif