diff --git a/arch/microblaze/dts/microblaze-generic.dts b/arch/microblaze/dts/microblaze-generic.dts
index 2033309..8751c36 100644
--- a/arch/microblaze/dts/microblaze-generic.dts
+++ b/arch/microblaze/dts/microblaze-generic.dts
@@ -1,7 +1,13 @@
-/dts-v1/;
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	aliases {
-	} ;
-} ;
+/dts-v1/;
+/include/ "system-conf.dtsi"
+/ {
+};
+
+
+&spi_flash {
+	flash0: flash@0 {
+		compatible = "micron,n25q256a13";
+	};
+};
+
+
diff --git a/arch/microblaze/dts/pl.dtsi b/arch/microblaze/dts/pl.dtsi
new file mode 100644
index 0000000..1511a15
--- /dev/null
+++ b/arch/microblaze/dts/pl.dtsi
@@ -0,0 +1,178 @@
+/*
+ * CAUTION: This file is automatically generated by Xilinx.
+ * Version: HSI 2015.4
+ * Today is: Tue Oct 27 09:36:05 2015
+*/
+
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "xlnx,microblaze";
+	model = "Xilinx MicroBlaze";
+	cpus {
+		#address-cells = <1>;
+		#cpus = <1>;
+		#size-cells = <0>;
+		microblaze_0: cpu@0 {
+			bus-handle = <&amba_pl>;
+			clock-frequency = <100000000>;
+			clocks = <&clk_cpu>;
+			compatible = "xlnx,microblaze-9.5";
+			d-cache-baseaddr = <0x80000000>;
+			d-cache-highaddr = <0x8fffffff>;
+			d-cache-line-size = <0x20>;
+			d-cache-size = <0x4000>;
+			device_type = "cpu";
+			i-cache-baseaddr = <0x80000000>;
+			i-cache-highaddr = <0x8fffffff>;
+			i-cache-line-size = <0x10>;
+			i-cache-size = <0x4000>;
+			interrupt-handle = <&microblaze_0_axi_intc>;
+			model = "microblaze,9.5";
+			timebase-frequency = <100000000>;
+			xlnx,addr-tag-bits = <0x10>;
+			xlnx,allow-dcache-wr = <0x1>;
+			xlnx,allow-icache-wr = <0x1>;
+			xlnx,area-optimized = <0x0>;
+			xlnx,async-interrupt = <0x1>;
+			xlnx,avoid-primitives = <0x0>;
+			xlnx,base-vectors = <0x00000000>;
+			xlnx,branch-target-cache-size = <0x0>;
+			xlnx,cache-byte-size = <0x4000>;
+			xlnx,d-axi = <0x1>;
+			xlnx,d-lmb = <0x1>;
+			xlnx,d-lmb-mon = <0x0>;
+			xlnx,data-size = <0x20>;
+			xlnx,dc-axi-mon = <0x0>;
+			xlnx,dcache-addr-tag = <0x10>;
+			xlnx,dcache-always-used = <0x1>;
+			xlnx,dcache-byte-size = <0x4000>;
+			xlnx,dcache-data-width = <0x0>;
+			xlnx,dcache-force-tag-lutram = <0x0>;
+			xlnx,dcache-line-len = <0x8>;
+			xlnx,dcache-use-writeback = <0x0>;
+			xlnx,dcache-victims = <0x0>;
+			xlnx,debug-counter-width = <0x20>;
+			xlnx,debug-enabled = <0x1>;
+			xlnx,debug-event-counters = <0x5>;
+			xlnx,debug-external-trace = <0x0>;
+			xlnx,debug-latency-counters = <0x1>;
+			xlnx,debug-profile-size = <0x0>;
+			xlnx,debug-trace-size = <0x2000>;
+			xlnx,div-zero-exception = <0x1>;
+			xlnx,dp-axi-mon = <0x0>;
+			xlnx,dynamic-bus-sizing = <0x0>;
+			xlnx,ecc-use-ce-exception = <0x0>;
+			xlnx,edge-is-positive = <0x1>;
+			xlnx,enable-discrete-ports = <0x0>;
+			xlnx,endianness = <0x1>;
+			xlnx,fault-tolerant = <0x0>;
+			xlnx,fpu-exception = <0x0>;
+			xlnx,freq = <0x5f5e100>;
+			xlnx,fsl-exception = <0x0>;
+			xlnx,fsl-links = <0x0>;
+			xlnx,i-axi = <0x0>;
+			xlnx,i-lmb = <0x1>;
+			xlnx,i-lmb-mon = <0x0>;
+			xlnx,ic-axi-mon = <0x0>;
+			xlnx,icache-always-used = <0x1>;
+			xlnx,icache-data-width = <0x0>;
+			xlnx,icache-force-tag-lutram = <0x0>;
+			xlnx,icache-line-len = <0x4>;
+			xlnx,icache-streams = <0x1>;
+			xlnx,icache-victims = <0x8>;
+			xlnx,ill-opcode-exception = <0x1>;
+			xlnx,imprecise-exceptions = <0x0>;
+			xlnx,interconnect = <0x2>;
+			xlnx,interrupt-is-edge = <0x0>;
+			xlnx,interrupt-mon = <0x0>;
+			xlnx,ip-axi-mon = <0x0>;
+			xlnx,lockstep-select = <0x0>;
+			xlnx,lockstep-slave = <0x0>;
+			xlnx,mmu-dtlb-size = <0x4>;
+			xlnx,mmu-itlb-size = <0x2>;
+			xlnx,mmu-privileged-instr = <0x0>;
+			xlnx,mmu-tlb-access = <0x3>;
+			xlnx,mmu-zones = <0x2>;
+			xlnx,num-sync-ff-clk = <0x2>;
+			xlnx,num-sync-ff-clk-debug = <0x2>;
+			xlnx,num-sync-ff-clk-irq = <0x1>;
+			xlnx,num-sync-ff-dbg-clk = <0x1>;
+			xlnx,number-of-pc-brk = <0x1>;
+			xlnx,number-of-rd-addr-brk = <0x0>;
+			xlnx,number-of-wr-addr-brk = <0x0>;
+			xlnx,opcode-0x0-illegal = <0x1>;
+			xlnx,optimization = <0x0>;
+			xlnx,pc-width = <0x20>;
+			xlnx,pvr = <0x2>;
+			xlnx,pvr-user1 = <0x00>;
+			xlnx,pvr-user2 = <0x00000000>;
+			xlnx,reset-msr = <0x00000000>;
+			xlnx,sco = <0x0>;
+			xlnx,trace = <0x0>;
+			xlnx,unaligned-exceptions = <0x1>;
+			xlnx,use-barrel = <0x1>;
+			xlnx,use-branch-target-cache = <0x1>;
+			xlnx,use-config-reset = <0x0>;
+			xlnx,use-dcache = <0x1>;
+			xlnx,use-div = <0x1>;
+			xlnx,use-ext-brk = <0x0>;
+			xlnx,use-ext-nm-brk = <0x0>;
+			xlnx,use-extended-fsl-instr = <0x0>;
+			xlnx,use-fpu = <0x0>;
+			xlnx,use-hw-mul = <0x2>;
+			xlnx,use-icache = <0x1>;
+			xlnx,use-interrupt = <0x2>;
+			xlnx,use-mmu = <0x3>;
+			xlnx,use-msr-instr = <0x1>;
+			xlnx,use-pcmp-instr = <0x1>;
+			xlnx,use-reorder-instr = <0x1>;
+			xlnx,use-stack-protection = <0x0>;
+		};
+	};
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clk_cpu: clk_cpu@0 {
+			#clock-cells = <0>;
+			clock-frequency = <100000000>;
+			clock-output-names = "clk_cpu";
+			compatible = "fixed-clock";
+			reg = <0>;
+		};
+		clk_bus_0: clk_bus_0@1 {
+			#clock-cells = <0>;
+			clock-frequency = <100000000>;
+			clock-output-names = "clk_bus_0";
+			compatible = "fixed-clock";
+			reg = <1>;
+		};
+	};
+	amba_pl: amba_pl {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges ;
+		microblaze_0_axi_intc: interrupt-controller@41200000 {
+			#interrupt-cells = <2>;
+			compatible = "xlnx,xps-intc-1.00.a";
+			interrupt-controller ;
+			reg = <0x41200000 0x10000>;
+			xlnx,kind-of-intr = <0x1>;
+			xlnx,num-intr-inputs = <0x3>;
+		};
+		RS232_Uart_1: serial@40600000 {
+			clock-frequency = <100000000>;
+			compatible = "xlnx,xps-uartlite-1.00.a";
+			current-speed = <115200>;
+		} ;
+		spi_flash: axi_quad_spi@44a10000 {
+			compatible = "xlnx,xps-spi-2.00.a";
+			interrupt-parent = <&microblaze_0_axi_intc>;
+			interrupts = <0 0>;
+			reg = <0x44a00000 0x10000>;
+			xlnx,num-ss-bits = <0x1>;
+		};
+	};
+};
diff --git a/arch/microblaze/dts/system-conf.dtsi b/arch/microblaze/dts/system-conf.dtsi
new file mode 100644
index 0000000..2aad1ab
--- /dev/null
+++ b/arch/microblaze/dts/system-conf.dtsi
@@ -0,0 +1,55 @@
+/*
+ * CAUTION: This file is automatically generated by PetaLinux SDK.
+ * DO NOT modify this file
+ */
+
+/include/ "pl.dtsi"
+
+/ {
+	model = "Xilinx-AC701-AXI-full-2015.4";
+	aliases {
+		serial0 = &RS232_Uart_1;
+		spi0 = &spi_flash;
+	};
+	chosen {
+		bootargs = "console=ttyUL0,115200 earlyprintk";
+	};
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+
+&spi_flash {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	flash0: flash@0 {
+		compatible = "micron,n25q128";
+		reg = <0x0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <25000000>;
+		partition@0x00000000 {
+			label = "fpga";
+			reg = <0x00000000 0x00a00000>;
+		};
+		partition@0x00a00000 {
+			label = "boot";
+			reg = <0x00a00000 0x00060000>;
+		};
+		partition@0x00a60000 {
+			label = "bootenv";
+			reg = <0x00a60000 0x00040000>;
+		};
+		partition@0x00aa0000 {
+			label = "kernel";
+			reg = <0x00aa0000 0x00c00000>;
+		};
+		partition@0x016a0000 {
+			label = "spare";
+			reg = <0x016a0000 0x00000000>;
+		};
+	};
+};
+
diff --git a/arch/microblaze/dts/system-top.dts b/arch/microblaze/dts/system-top.dts
new file mode 100644
index 0000000..3832812
--- /dev/null
+++ b/arch/microblaze/dts/system-top.dts
@@ -0,0 +1,13 @@
+/dts-v1/;
+/include/ "system-conf.dtsi"
+/ {
+};
+
+s
+&spi_flash {
+	flash0: flash@0 {
+		compatible = "micron,n25q256a13";
+	};
+};
+
+
diff --git a/board/xilinx/microblaze-generic/config.mk b/board/xilinx/microblaze-generic/config.mk
index 36bdd96..26a21bf 100644
--- a/board/xilinx/microblaze-generic/config.mk
+++ b/board/xilinx/microblaze-generic/config.mk
@@ -1,18 +1,10 @@
-#
-# (C) Copyright 2007 Michal Simek
-#
-# Michal  SIMEK <monstr@monstr.eu>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-# CAUTION: This file is a faked configuration !!!
-#          There is no real target for the microblaze-generic
-#          configuration. You have to replace this file with
-#          the generated file from your Xilinx design flow.
-#
-
-CONFIG_SYS_TEXT_BASE = 0x29000000
-
-PLATFORM_CPPFLAGS += -mno-xl-soft-mul
-PLATFORM_CPPFLAGS += -mno-xl-soft-div
-PLATFORM_CPPFLAGS += -mxl-barrel-shift
+#
+# CAUTION: This file is automatically generated by PetaLinux SDK
+#
+
+TEXT_BASE = 0x80400000
+CONFIG_SYS_TEXT_BASE = 0x80400000
+
+PLATFORM_CPPFLAGS += -mno-xl-soft-mul
+PLATFORM_CPPFLAGS += -mno-xl-soft-div
+PLATFORM_CPPFLAGS += -mxl-barrel-shift
diff --git a/board/xilinx/microblaze-generic/xparameters.h b/board/xilinx/microblaze-generic/xparameters.h
deleted file mode 100644
index d6d0d67..0000000
--- a/board/xilinx/microblaze-generic/xparameters.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * (C) Copyright 2007 Michal Simek
- *
- * Michal  SIMEK <monstr@monstr.eu>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- * CAUTION: This file is a faked configuration !!!
- *          There is no real target for the microblaze-generic
- *          configuration. You have to replace this file with
- *          the generated file from your Xilinx design flow.
- */
-
-#define XILINX_BOARD_NAME	microblaze-generic
-
-/* System Clock Frequency */
-#define XILINX_CLOCK_FREQ	100000000
-
-/* Microblaze is microblaze_0 */
-#define XILINX_USE_MSR_INSTR	1
-#define XILINX_FSL_NUMBER	3
-
-/* Interrupt controller is opb_intc_0 */
-#define XILINX_INTC_BASEADDR	0x41200000
-#define XILINX_INTC_NUM_INTR_INPUTS	6
-
-/* Timer pheriphery is opb_timer_1 */
-#define XILINX_TIMER_BASEADDR	0x41c00000
-#define XILINX_TIMER_IRQ	0
-
-/* Uart pheriphery is RS232_Uart */
-#define XILINX_UARTLITE_BASEADDR	0x40600000
-#define XILINX_UARTLITE_BAUDRATE	115200
-
-/* IIC pheriphery is IIC_EEPROM */
-#define XILINX_IIC_0_BASEADDR	0x40800000
-#define XILINX_IIC_0_FREQ	100000
-#define XILINX_IIC_0_BIT	0
-
-/* GPIO is LEDs_4Bit*/
-#define XILINX_GPIO_BASEADDR	0x40000000
-
-/* Flash Memory is FLASH_2Mx32 */
-#define XILINX_FLASH_START	0x2c000000
-#define XILINX_FLASH_SIZE	0x00800000
-
-/* Main Memory is DDR_SDRAM_64Mx32 */
-#define XILINX_RAM_START	0x28000000
-#define XILINX_RAM_SIZE	0x04000000
-
-/* Sysace Controller is SysACE_CompactFlash */
-#define XILINX_SYSACE_BASEADDR	0x41800000
-#define XILINX_SYSACE_HIGHADDR	0x4180ffff
-#define XILINX_SYSACE_MEM_WIDTH	16
-
-/* Ethernet controller is Ethernet_MAC */
-#define XILINX_EMACLITE_BASEADDR       0x40C00000
-
-/* LL_TEMAC Ethernet controller */
-#define XILINX_LLTEMAC_BASEADDR			0x44000000
-#define XILINX_LLTEMAC_SDMA_CTRL_BASEADDR	0x42000180
-#define XILINX_LLTEMAC_BASEADDR1		0x44200000
-#define XILINX_LLTEMAC_FIFO_BASEADDR1		0x42100000
-
-/* Watchdog IP is wxi_timebase_wdt_0 */
-#define XILINX_WATCHDOG_BASEADDR	0x50000000
-#define XILINX_WATCHDOG_IRQ		1
diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig
index da589a0..485a723 100644
--- a/configs/microblaze-generic_defconfig
+++ b/configs/microblaze-generic_defconfig
@@ -1,8 +1,280 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# U-Boot 2015.07 Configuration
+#
+CONFIG_HAVE_GENERIC_BOARD=y
+CONFIG_SYS_GENERIC_BOARD=y
+# CONFIG_ARC is not set
+# CONFIG_ARM is not set
+# CONFIG_AVR32 is not set
+# CONFIG_BLACKFIN is not set
+# CONFIG_M68K is not set
 CONFIG_MICROBLAZE=y
+# CONFIG_MIPS is not set
+# CONFIG_NDS32 is not set
+# CONFIG_NIOS2 is not set
+# CONFIG_OPENRISC is not set
+# CONFIG_PPC is not set
+# CONFIG_SANDBOX is not set
+# CONFIG_SH is not set
+# CONFIG_SPARC is not set
+# CONFIG_X86 is not set
+CONFIG_SYS_ARCH="microblaze"
+CONFIG_SYS_VENDOR="xilinx"
+CONFIG_SYS_BOARD="microblaze-generic"
+CONFIG_SYS_CONFIG_NAME="microblaze-generic"
+
+#
+# MicroBlaze architecture
+#
 CONFIG_TARGET_MICROBLAZE_GENERIC=y
 CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic"
-CONFIG_SPL=y
-CONFIG_SYS_PROMPT="U-Boot-mONStR> "
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_EXPERT=y
+CONFIG_SYS_MALLOC_CLEAR_ON_INIT=y
+
+#
+# Boot images
+#
+CONFIG_SUPPORT_SPL=y
+# CONFIG_SPL is not set
+# CONFIG_FIT is not set
+CONFIG_SYS_EXTRA_OPTIONS=""
+
+#
+# Command line interface
+#
+# CONFIG_HUSH_PARSER is not set
+
+#
+# Autoboot options
+#
+# CONFIG_AUTOBOOT_KEYED is not set
+
+#
+# Commands
+#
+
+#
+# Info commands
+#
+CONFIG_CMD_BDI=y
+CONFIG_CMD_CONSOLE=y
+# CONFIG_CMD_CPU is not set
+# CONFIG_CMD_LICENSE is not set
+
+#
+# Boot commands
+#
+CONFIG_CMD_BOOTD=y
+CONFIG_CMD_BOOTM=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_RUN=y
+CONFIG_CMD_IMI=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_XIMG=y
+
+#
+# Environment commands
+#
+CONFIG_CMD_EXPORTENV=y
+CONFIG_CMD_IMPORTENV=y
+CONFIG_CMD_EDITENV=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_ENV_EXISTS=y
+
+#
+# Memory commands
+#
+CONFIG_CMD_MEMORY=y
+CONFIG_CMD_CRC32=y
+# CONFIG_LOOPW is not set
+# CONFIG_CMD_MEMTEST is not set
+# CONFIG_CMD_MX_CYCLIC is not set
+# CONFIG_CMD_MEMINFO is not set
+
+#
+# Device access commands
+#
+CONFIG_CMD_DM=y
+# CONFIG_CMD_DEMO is not set
+CONFIG_CMD_LOADB=y
+CONFIG_CMD_LOADS=y
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_NAND is not set
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+# CONFIG_CMD_I2C is not set
+# CONFIG_CMD_USB is not set
+CONFIG_CMD_FPGA=y
+
+#
+# Shell scripting commands
+#
+CONFIG_CMD_ECHO=y
+CONFIG_CMD_ITEST=y
+CONFIG_CMD_SOURCE=y
 # CONFIG_CMD_SETEXPR is not set
+
+#
+# Network commands
+#
+CONFIG_CMD_NET=y
+# CONFIG_CMD_TFTPPUT is not set
+# CONFIG_CMD_TFTPSRV is not set
+# CONFIG_CMD_RARP is not set
+# CONFIG_CMD_DHCP is not set
+CONFIG_CMD_NFS=y
+CONFIG_CMD_PING=y
+# CONFIG_CMD_CDP is not set
+# CONFIG_CMD_SNTP is not set
+# CONFIG_CMD_DNS is not set
+# CONFIG_CMD_LINK_LOCAL is not set
+
+#
+# Misc commands
+#
+# CONFIG_CMD_TIME is not set
+CONFIG_CMD_MISC=y
+# CONFIG_CMD_TIMER is not set
+# CONFIG_CMD_ZYNQ_RSA is not set
+
+#
+# Boot timing
+#
+# CONFIG_BOOTSTAGE is not set
+CONFIG_BOOTSTAGE_USER_COUNT=20
+CONFIG_BOOTSTAGE_STASH_ADDR=0
+CONFIG_BOOTSTAGE_STASH_SIZE=4096
+
+#
+# Power commands
+#
+CONFIG_SUPPORT_OF_CONTROL=y
+
+#
+# Device Tree Control
+#
 CONFIG_OF_CONTROL=y
+CONFIG_SPL_DISABLE_OF_CONTROL=y
+# CONFIG_OF_SEPARATE is not set
 CONFIG_OF_EMBED=y
+CONFIG_NET=y
+# CONFIG_NET_RANDOM_ETHADDR is not set
+
+#
+# Device Drivers
+#
+CONFIG_DM=y
+CONFIG_DM_WARN=y
+CONFIG_DM_DEVICE_REMOVE=y
+CONFIG_DM_STDIO=y
+CONFIG_DM_SEQ_ALIAS=y
+# CONFIG_CPU is not set
+# CONFIG_DM_DEMO is not set
+
+#
+# PCI
+#
+# CONFIG_DM_PCI is not set
+
+#
+# NAND Device Support
+#
+# CONFIG_NAND_DENALI is not set
+# CONFIG_NAND_VF610_NFC is not set
+
+#
+# Generic NAND options
+#
+
+#
+# SPI Flash Support
+#
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
+# CONFIG_SPI_FLASH_DATAFLASH is not set
+# CONFIG_SPI_FLASH_MTD is not set
+# CONFIG_CROS_EC is not set
+# CONFIG_CONFIG_FSL_SEC_MON is not set
+# CONFIG_PCA9551_LED is not set
+# CONFIG_DM_ETH is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_CROS_EC_KEYB is not set
+# CONFIG_DM_SERIAL is not set
+# CONFIG_DEBUG_UART is not set
+# CONFIG_TPM_TIS_SANDBOX is not set
+# CONFIG_DM_I2C is not set
+# CONFIG_DM_I2C_COMPAT is not set
+
+#
+# SPI Support
+#
+CONFIG_DM_SPI=y
+# CONFIG_CADENCE_QSPI is not set
+# CONFIG_DESIGNWARE_SPI is not set
+# CONFIG_EXYNOS_SPI is not set
+# CONFIG_FSL_DSPI is not set
+# CONFIG_FSL_QSPI is not set
+# CONFIG_ICH_SPI is not set
+# CONFIG_TEGRA114_SPI is not set
+# CONFIG_TEGRA20_SFLASH is not set
+# CONFIG_TEGRA20_SLINK is not set
+# CONFIG_XILINX_SPI is not set
+# CONFIG_FSL_ESPI is not set
+# CONFIG_TI_QSPI is not set
+# CONFIG_DM_GPIO is not set
+# CONFIG_LPC32XX_GPIO is not set
+# CONFIG_VYBRID_GPIO is not set
+
+#
+# Power
+#
+# CONFIG_DM_PMIC is not set
+# CONFIG_DM_REGULATOR is not set
+# CONFIG_VIDEO_VESA is not set
+# CONFIG_VIDEO_LCD_SSD2828 is not set
+# CONFIG_DISPLAY_PORT is not set
+# CONFIG_VIDEO_TEGRA124 is not set
+# CONFIG_SOUND is not set
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB is not set
+
+#
+# MMC Host controller Support
+#
+# CONFIG_DM_RTC is not set
+# CONFIG_FSL_CAAM is not set
+# CONFIG_DM_THERMAL is not set
+# CONFIG_PHYS_TO_BUS is not set
+
+#
+# File systems
+#
+
+#
+# Library routines
+#
+# CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED is not set
+CONFIG_SYS_HZ=1000
+# CONFIG_SYS_VSNPRINTF is not set
+CONFIG_REGEX=y
+# CONFIG_LIB_RAND is not set
+# CONFIG_RSA is not set
+
+#
+# Hashing Support
+#
+# CONFIG_SHA1 is not set
+# CONFIG_SHA256 is not set
+# CONFIG_SHA_HW_ACCEL is not set
+# CONFIG_ERRNO_STR is not set
+# CONFIG_UNIT_TEST is not set
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index 8ce1c49..264eaa5 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -1,434 +1,4 @@
-/*
- * (C) Copyright 2007-2010 Michal Simek
- *
- * Michal SIMEK <monstr@monstr.eu>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include "../board/xilinx/microblaze-generic/xparameters.h"
-
-/* MicroBlaze CPU */
-#define	MICROBLAZE_V5		1
-
-/* linear and spi flash memory */
-#ifdef XILINX_FLASH_START
-#define	FLASH
-#undef	SPIFLASH
-#undef	RAMENV	/* hold environment in flash */
-#else
-#ifdef XILINX_SPI_FLASH_BASEADDR
-#undef	FLASH
-#define	SPIFLASH
-#undef	RAMENV	/* hold environment in flash */
-#else
-#undef	FLASH
-#undef	SPIFLASH
-#define	RAMENV	/* hold environment in RAM */
-#endif
-#endif
-
-/* uart */
-#ifdef XILINX_UARTLITE_BASEADDR
-# define CONFIG_XILINX_UARTLITE
-# define CONFIG_SERIAL_BASE	XILINX_UARTLITE_BASEADDR
-# define CONFIG_BAUDRATE	XILINX_UARTLITE_BAUDRATE
-# define CONFIG_SYS_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
-# define CONSOLE_ARG	"console=console=ttyUL0,115200\0"
-#elif XILINX_UART16550_BASEADDR
-# define CONFIG_SYS_NS16550		1
-# define CONFIG_SYS_NS16550_SERIAL
-# if defined(__MICROBLAZEEL__)
-#  define CONFIG_SYS_NS16550_REG_SIZE	-4
-# else
-#  define CONFIG_SYS_NS16550_REG_SIZE	4
-# endif
-# define CONFIG_CONS_INDEX		1
-# define CONFIG_SYS_NS16550_COM1 \
-		((XILINX_UART16550_BASEADDR & ~0xF) + 0x1000)
-# define CONFIG_SYS_NS16550_CLK	XILINX_UART16550_CLOCK_HZ
-# define CONFIG_BAUDRATE	115200
-
-/* The following table includes the supported baudrates */
-# define CONFIG_SYS_BAUDRATE_TABLE \
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
-# define CONSOLE_ARG	"console=console=ttyS0,115200\0"
-#else
-# error Undefined uart
-#endif
-
-/* setting reset address */
-/*#define	CONFIG_SYS_RESET_ADDRESS	CONFIG_SYS_TEXT_BASE*/
-
-/* ethernet */
-#undef CONFIG_SYS_ENET
-#if defined(XILINX_EMACLITE_BASEADDR) || defined(CONFIG_OF_CONTROL)
-# define CONFIG_XILINX_EMACLITE	1
-# define CONFIG_SYS_ENET
-#endif
-#if defined(XILINX_LLTEMAC_BASEADDR)
-# define CONFIG_XILINX_LL_TEMAC	1
-# define CONFIG_SYS_ENET
-#endif
-#if defined(XILINX_AXIEMAC_BASEADDR)
-# define CONFIG_XILINX_AXIEMAC	1
-# define CONFIG_SYS_ENET
-#endif
-
-#undef ET_DEBUG
-
-/* gpio */
-#ifdef XILINX_GPIO_BASEADDR
-# define CONFIG_XILINX_GPIO
-# define CONFIG_SYS_GPIO_0_ADDR		XILINX_GPIO_BASEADDR
-#endif
-
-/* interrupt controller */
-#ifdef XILINX_INTC_BASEADDR
-# define CONFIG_SYS_INTC_0_ADDR		XILINX_INTC_BASEADDR
-# define CONFIG_SYS_INTC_0_NUM		XILINX_INTC_NUM_INTR_INPUTS
-#endif
-
-/* timer */
-#if defined(XILINX_TIMER_BASEADDR) && defined(XILINX_TIMER_IRQ)
-#  define CONFIG_SYS_TIMER_0_ADDR	XILINX_TIMER_BASEADDR
-#  define CONFIG_SYS_TIMER_0_IRQ	XILINX_TIMER_IRQ
-#endif
-
-/* watchdog */
-#if defined(XILINX_WATCHDOG_BASEADDR) && defined(XILINX_WATCHDOG_IRQ)
-# define CONFIG_WATCHDOG_BASEADDR	XILINX_WATCHDOG_BASEADDR
-# define CONFIG_WATCHDOG_IRQ		XILINX_WATCHDOG_IRQ
-# define CONFIG_HW_WATCHDOG
-# define CONFIG_XILINX_TB_WATCHDOG
-#endif
-
-#if !defined(CONFIG_OF_CONTROL) || \
-	(defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_OF_CONTROL))
-/* ddr sdram - main memory */
-# define CONFIG_SYS_SDRAM_BASE	XILINX_RAM_START
-# define CONFIG_SYS_SDRAM_SIZE	XILINX_RAM_SIZE
-#endif
-
-#define CONFIG_SYS_MALLOC_LEN	0xC0000
-#ifndef CONFIG_SPL_BUILD
-# define CONFIG_SYS_MALLOC_F_LEN	1024
-#else
-# define CONFIG_SYS_MALLOC_SIMPLE
-# define CONFIG_SYS_MALLOC_F_LEN	0x150
-#endif
-
-/* Stack location before relocation */
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_TEXT_BASE
-
-/*
- * CFI flash memory layout - Example
- * CONFIG_SYS_FLASH_BASE = 0x2200_0000;
- * CONFIG_SYS_FLASH_SIZE = 0x0080_0000;	  8MB
- *
- * SECT_SIZE = 0x20000;			128kB is one sector
- * CONFIG_ENV_SIZE = SECT_SIZE;		128kB environment store
- *
- * 0x2200_0000	CONFIG_SYS_FLASH_BASE
- *					FREE		256kB
- * 0x2204_0000	CONFIG_ENV_ADDR
- *					ENV_AREA	128kB
- * 0x2206_0000
- *					FREE
- * 0x2280_0000	CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE
- *
- */
-
-#ifdef FLASH
-# define CONFIG_SYS_FLASH_BASE		XILINX_FLASH_START
-# define CONFIG_SYS_FLASH_SIZE		XILINX_FLASH_SIZE
-# define CONFIG_SYS_FLASH_CFI		1
-# define CONFIG_FLASH_CFI_DRIVER	1
-/* ?empty sector */
-# define CONFIG_SYS_FLASH_EMPTY_INFO	1
-/* max number of memory banks */
-# define CONFIG_SYS_MAX_FLASH_BANKS	1
-/* max number of sectors on one chip */
-# define CONFIG_SYS_MAX_FLASH_SECT	512
-/* hardware flash protection */
-# define CONFIG_SYS_FLASH_PROTECTION
-/* use buffered writes (20x faster) */
-# define	CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
-# ifdef	RAMENV
-#  define CONFIG_ENV_IS_NOWHERE	1
-#  define CONFIG_ENV_SIZE	0x1000
-#  define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
-
-# else	/* FLASH && !RAMENV */
-#  define CONFIG_ENV_IS_IN_FLASH	1
-/* 128K(one sector) for env */
-#  define CONFIG_ENV_SECT_SIZE	0x20000
-#  define CONFIG_ENV_ADDR \
-			(CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
-#  define CONFIG_ENV_SIZE	0x20000
-# endif /* FLASH && !RAMBOOT */
-#else /* !FLASH */
-
-#ifdef SPIFLASH
-# define CONFIG_SYS_NO_FLASH		1
-# define CONFIG_SYS_SPI_BASE		XILINX_SPI_FLASH_BASEADDR
-# define CONFIG_XILINX_SPI		1
-# define CONFIG_SPI			1
-# define CONFIG_SPI_FLASH_STMICRO	1
-# define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
-# define CONFIG_SF_DEFAULT_SPEED	XILINX_SPI_FLASH_MAX_FREQ
-# define CONFIG_SF_DEFAULT_CS		XILINX_SPI_FLASH_CS
-
-# ifdef	RAMENV
-#  define CONFIG_ENV_IS_NOWHERE	1
-#  define CONFIG_ENV_SIZE	0x1000
-#  define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
-
-# else	/* SPIFLASH && !RAMENV */
-#  define CONFIG_ENV_IS_IN_SPI_FLASH	1
-#  define CONFIG_ENV_SPI_MODE		SPI_MODE_3
-#  define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
-#  define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
-/* 128K(two sectors) for env */
-#  define CONFIG_ENV_SECT_SIZE	0x10000
-#  define CONFIG_ENV_SIZE	(2 * CONFIG_ENV_SECT_SIZE)
-/* Warning: adjust the offset in respect of other flash content and size */
-#  define CONFIG_ENV_OFFSET	(128 * CONFIG_ENV_SECT_SIZE) /* at 8MB */
-# endif /* SPIFLASH && !RAMBOOT */
-#else /* !SPIFLASH */
-
-/* ENV in RAM */
-# define CONFIG_SYS_NO_FLASH	1
-# define CONFIG_ENV_IS_NOWHERE	1
-# define CONFIG_ENV_SIZE	0x1000
-# define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
-#endif /* !SPIFLASH */
-#endif /* !FLASH */
-
-/* system ace */
-#ifdef XILINX_SYSACE_BASEADDR
-# define CONFIG_SYSTEMACE
-/* #define DEBUG_SYSTEMACE */
-# define SYSTEMACE_CONFIG_FPGA
-# define CONFIG_SYS_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
-# define CONFIG_SYS_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
-# define CONFIG_DOS_PARTITION
-#endif
-
-#if defined(XILINX_USE_ICACHE)
-# define CONFIG_ICACHE
-#else
-# undef CONFIG_ICACHE
-#endif
-
-#if defined(XILINX_USE_DCACHE)
-# define CONFIG_DCACHE
-#else
-# undef CONFIG_DCACHE
-#endif
-
-#ifndef XILINX_DCACHE_BYTE_SIZE
-#define XILINX_DCACHE_BYTE_SIZE	32768
-#endif
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MFSL
-#define CONFIG_CMD_GPIO
-
-#if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE)
-# define CONFIG_CMD_CACHE
-#else
-# undef CONFIG_CMD_CACHE
-#endif
-
-#ifdef CONFIG_SYS_ENET
-# define CONFIG_CMD_PING
-# define CONFIG_CMD_DHCP
-# define CONFIG_CMD_TFTPPUT
-#endif
-
-#if defined(CONFIG_SYSTEMACE)
-# define CONFIG_CMD_EXT2
-# define CONFIG_CMD_FAT
-#endif
-
-#if defined(FLASH)
-# define CONFIG_CMD_JFFS2
-# define CONFIG_CMD_UBI
-# undef CONFIG_CMD_UBIFS
-
-# if !defined(RAMENV)
-#  define CONFIG_CMD_SAVES
-# endif
-
-#else
-#if defined(SPIFLASH)
-# define CONFIG_CMD_SF
-
-# if !defined(RAMENV)
-#  define CONFIG_CMD_SAVES
-# endif
-#else
-# undef CONFIG_CMD_JFFS2
-# undef CONFIG_CMD_UBI
-# undef CONFIG_CMD_UBIFS
-#endif
-#endif
-
-#if defined(CONFIG_CMD_JFFS2)
-# define CONFIG_MTD_PARTITIONS
-#endif
-
-#if defined(CONFIG_CMD_UBIFS)
-# define CONFIG_CMD_UBI
-# define CONFIG_LZO
-#endif
-
-#if defined(CONFIG_CMD_UBI)
-# define CONFIG_MTD_PARTITIONS
-# define CONFIG_RBTREE
-#endif
-
-#if defined(CONFIG_MTD_PARTITIONS)
-/* MTD partitions */
-#define CONFIG_CMD_MTDPARTS	/* mtdparts command line support */
-#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
-#define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT		"nor0=flash-0"
-
-/* default mtd partition table */
-#define MTDPARTS_DEFAULT	"mtdparts=flash-0:256k(u-boot),"\
-				"256k(env),3m(kernel),1m(romfs),"\
-				"1m(cramfs),-(jffs2)"
-#endif
-
-/* size of console buffer */
-#define	CONFIG_SYS_CBSIZE	512
- /* print buffer size */
-#define	CONFIG_SYS_PBSIZE \
-		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-/* max number of command args */
-#define	CONFIG_SYS_MAXARGS	15
-#define	CONFIG_SYS_LONGHELP
-/* default load address */
-#define	CONFIG_SYS_LOAD_ADDR	XILINX_RAM_START
-
-#define	CONFIG_BOOTDELAY	-1	/* -1 disables auto-boot */
-#define	CONFIG_BOOTARGS		"root=romfs"
-#define	CONFIG_HOSTNAME		XILINX_BOARD_NAME
-#define	CONFIG_BOOTCOMMAND	"base 0;tftp 11000000 image.img;bootm"
-#define	CONFIG_IPADDR		192.168.0.3
-#define	CONFIG_SERVERIP		192.168.0.5
-#define	CONFIG_GATEWAYIP	192.168.0.1
-
-/* architecture dependent code */
-#define	CONFIG_SYS_USR_EXCEP	/* user exception */
-
-#define	CONFIG_PREBOOT	"echo U-BOOT for ${hostname};setenv preboot;echo"
-
-#define	CONFIG_EXTRA_ENV_SETTINGS	"unlock=yes\0" \
-					"nor0=flash-0\0"\
-					"mtdparts=mtdparts=flash-0:"\
-					"256k(u-boot),256k(env),3m(kernel),"\
-					"1m(romfs),1m(cramfs),-(jffs2)\0"\
-					"nc=setenv stdout nc;"\
-					"setenv stdin nc\0" \
-					"serial=setenv stdout serial;"\
-					"setenv stdin serial\0"
-
-#define CONFIG_CMDLINE_EDITING
-
-#define CONFIG_NETCONSOLE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* Enable flat device tree support */
-#define CONFIG_LMB		1
-#define CONFIG_FIT		1
-#define CONFIG_OF_LIBFDT	1
-
-#if defined(CONFIG_XILINX_LL_TEMAC) || defined(CONFIG_XILINX_AXIEMAC)
-# define CONFIG_MII		1
-# define CONFIG_CMD_MII		1
-# define CONFIG_PHY_GIGE	1
-# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	1
-# define CONFIG_PHYLIB		1
-# define CONFIG_PHY_ATHEROS	1
-# define CONFIG_PHY_BROADCOM	1
-# define CONFIG_PHY_DAVICOM	1
-# define CONFIG_PHY_LXT		1
-# define CONFIG_PHY_MARVELL	1
-# define CONFIG_PHY_MICREL	1
-# define CONFIG_PHY_NATSEMI	1
-# define CONFIG_PHY_REALTEK	1
-# define CONFIG_PHY_VITESSE	1
-#else
-# undef CONFIG_MII
-# undef CONFIG_CMD_MII
-# undef CONFIG_PHYLIB
-#endif
-
-/* SPL part */
-#define CONFIG_CMD_SPL
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_BOARD_INIT
-
-#define CONFIG_SPL_LDSCRIPT	"arch/microblaze/cpu/u-boot-spl.lds"
-
-#define CONFIG_SPL_RAM_DEVICE
-#ifdef CONFIG_SYS_FLASH_BASE
-# define CONFIG_SPL_NOR_SUPPORT
-# define CONFIG_SYS_UBOOT_BASE		CONFIG_SYS_FLASH_BASE
-#endif
-
-/* for booting directly linux */
-#define CONFIG_SPL_OS_BOOT
-
-#define CONFIG_SYS_OS_BASE		(CONFIG_SYS_FLASH_BASE + \
-					 0x60000)
-#define CONFIG_SYS_FDT_BASE		(CONFIG_SYS_FLASH_BASE + \
-					 0x40000)
-#define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_TEXT_BASE + \
-					 0x1000000)
-
-/* SP location before relocation, must use scratch RAM */
-/* BRAM start */
-#define CONFIG_SYS_INIT_RAM_ADDR	0x0
-/* BRAM size - will be generated */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x100000
-
-# define CONFIG_SPL_STACK_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - \
-					 CONFIG_SYS_MALLOC_F_LEN)
-
-/* Just for sure that there is a space for stack */
-#define CONFIG_SPL_STACK_SIZE		0x100
-
-#define CONFIG_SYS_UBOOT_START		CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SPL_MAX_FOOTPRINT	(CONFIG_SYS_INIT_RAM_SIZE - \
-					 CONFIG_SYS_INIT_RAM_ADDR - \
-					 CONFIG_SYS_MALLOC_F_LEN - \
-					 CONFIG_SPL_STACK_SIZE)
-
-#endif	/* __CONFIG_H */
+
+#include <configs/platform-auto.h>
+
+#define CONFIG_CMD_SF_TEST
diff --git a/include/configs/platform-auto.h b/include/configs/platform-auto.h
new file mode 100644
index 0000000..475316b
--- /dev/null
+++ b/include/configs/platform-auto.h
@@ -0,0 +1,170 @@
+/*
+ * This file is auto-generated by PetaLinux SDK
+ * DO NOT MODIFY this file, the modification will not persist
+ */
+
+#ifndef __PLNX_CONFIG_H
+#define __PLNX_CONFIG_H
+
+/* The following table includes the supported baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE  {115200}
+
+/* use serial multi for all serial devices */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+
+/* Board name */
+#define XILINX_BOARD_NAME	ESA11
+#define CONFIG_HOSTNAME	XILINX_BOARD_NAME
+
+/* processor - microblaze_0 */
+#define XILINX_USE_MSR_INSTR	1
+#define XILINX_FSL_LINKS	0
+#define XILINX_USE_ICACHE	1
+#define XILINX_USE_DCACHE	1
+#define XILINX_DCACHE_BYTE_SIZE	16384
+#define XILINX_PVR	2
+#define MICROBLAZE_V5
+#define CONFIG_CMD_IRQ
+#define CONFIG_DCACHE
+#define CONFIG_ICACHE
+
+/* main_memory - ddr3_sdram */
+#define CONFIG_SYS_SDRAM_BASE	0x80000000
+#define CONFIG_SYS_SDRAM_SIZE	0x10000000
+
+/* Memory testing handling */
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END	(CONFIG_SYS_SDRAM_BASE + 0x1000)
+#define CONFIG_SYS_LOAD_ADDR	CONFIG_SYS_SDRAM_BASE /* default load address */
+
+/* global pointer options */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_SDRAM_SIZE - GENERATED_GBL_DATA_SIZE)
+
+/* Size of malloc() pool */
+#define SIZE	0x100000
+#define CONFIG_SYS_MALLOC_LEN	SIZE
+#define CONFIG_SYS_MONITOR_LEN	SIZE
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_MONITOR_LEN - GENERATED_BD_INFO_SIZE)
+#define CONFIG_SYS_MONITOR_END	(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_MALLOC_BASE	(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
+#define CONFIG_SYS_MALLOC_F_LEN	0x1000
+
+/* stack */
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_TEXT_BASE
+
+/* No of_control support yet*/
+
+/* uart - rs232_uart */
+# define CONFIG_XILINX_UARTLITE
+# define XILINX_UARTLITE_BASEADDR	0x40600000
+# define CONFIG_BAUDRATE	115200
+# define CONSOLE_ARG	"console=console=ttyUL0,115200\0"
+
+
+
+/* spi_flash - spi_flash */
+#define XILINX_SPI_FLASH_BASEADDR	0x44A00000
+#define XILINX_SPI_FLASH_HIGHADDR	0x44A0FFFF
+#define XILINX_SPI_FLASH_SCK_RATIO	4
+#define CONFIG_XILINX_SPI
+#define XILINX_SPI_FLASH_MAX_FREQ	(XILINX_SPI_FLASH_ACLK / XILINX_SPI_FLASH_SCK_RATIO)
+#define CONFIG_SYS_SPI_BASE	XILINX_SPI_FLASH_BASEADDR
+#define CONFIG_ENV_SPI_MAX_HZ	XILINX_SPI_FLASH_MAX_FREQ
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SPI_FLASH_WINBOND
+#define XILINX_SPI_FLASH_ACLK	100000000
+#define XILINX_SPI_FLASH_CS	0
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_OFFSET	0xa60000
+#define CONFIG_ENV_SIZE	0x40000
+#define CONFIG_ENV_SECT_SIZE	0x20000
+
+/* timer - axi_timer_0 */
+#define CONFIG_SYS_TIMER_0_ADDR	0x41C00000
+#define CONFIG_SYS_TIMER_0	1
+#define CONFIG_SYS_TIMER_0_PRELOAD	( FREQUENCE/1000 )
+#define CONFIG_SYS_TIMER_0_IRQ	0
+#define FREQUENCE	100000000
+#define XILINX_CLOCK_FREQ	100000000
+
+
+/* intc - microblaze_0_axi_intc */
+#define CONFIG_SYS_INTC_0_ADDR	0x41200000
+#define CONFIG_SYS_INTC_0_NUM	3
+#define CONFIG_SYS_INTC_0	1
+
+/* FPGA */
+
+/* BOOTP options */
+#define CONFIG_BOOTP_SERVERIP
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*Command line configuration.*/
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_CMD_SAVES
+
+/* Miscellaneous configurable options */
+//#define	CONFIG_SYS_PROMPT	"U-Boot> "
+#define CONFIG_SYS_CBSIZE	2048/* Console I/O Buffer Size      */
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_MAXARGS	32	/* max number of command args */
+#define CONFIG_SYS_LONGHELP
+
+/* architecture dependent code */
+#define CONFIG_SYS_USR_EXCEP	/* user exception */
+#define CONFIG_SYS_HZ	1000
+
+/* Use the HUSH parser */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+/* Make the BOOTM LEN big enough for the compressed image */
+#define CONFIG_SYS_BOOTM_LEN 0x1000000
+
+/* auto-boot delay */
+#define	CONFIG_BOOTDELAY	4
+
+/* Don't define BOOTARGS, we get it from the DTB chosen fragment */
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_ENV_OVERWRITE	/* Allow to overwrite the u-boot environment variables */
+
+/* FIT image support */
+#define CONFIG_FIT	1
+#define CONFIG_LMB
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
+
+/* Initial memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ 0x8000000
+
+/* PREBOOT */
+#define CONFIG_PREBOOT	"echo U-BOOT for ${hostname};setenv preboot; echo; dhcp"
+
+/* Extra U-Boot Env settings */
+#define	CONFIG_EXTRA_ENV_SETTINGS	"unlock=yes\0" \
+					"nor0=flash-0\0"\
+					"mtdparts=mtdparts=flash-0:"\
+					"256k(u-boot),256k(env),3m(kernel),"\
+					"1m(romfs),1m(cramfs),-(jffs2)\0"\
+					"nc=setenv stdout nc;"\
+					"setenv stdin nc\0" \
+					"serial=setenv stdout serial;"\
+					"setenv stdin serial\0"\
+					"ethaddr=00:0A:35:02:C7:19\0"
+
+/* BOOTCOMMAND */
+#define CONFIG_BOOTCOMMAND	"run default_bootcmd"
+
+#undef CONFIG_SPL_BUILD /* Disable SPL by default*/
+
+#endif /* __PLNX_CONFIG_H */
