Deduplicate defconfigs for all DH i.MX6 DHSOM by including common configs/imx_dhsom_defconfig . This does introduce changes to the board configuration, namely it enables commands used on all DHSOM devices consistenty, the prompt is changed to u-boot=>, support for booting non-Linux OS which was likely never used is disabled, GPT partition table support is enabled, generic MTD support is enabled, LED support is enabled, DM PHY, PMIC and regulator support is also enabled, KASLR command is enabled.
Signed-off-by: Marek Vasut marex@denx.de --- Cc: Andreas Geisreiter ageisreiter@dh-electronics.de Cc: Christoph Niedermaier cniedermaier@dh-electronics.com Cc: Fabio Estevam festevam@gmail.com Cc: Quentin Schulz quentin.schulz@cherry.de Cc: Sean Anderson seanga2@gmail.com Cc: Simon Glass sjg@chromium.org Cc: Sumit Garg sumit.garg@linaro.org Cc: Tom Rini trini@konsulko.com Cc: u-boot@dh-electronics.com Cc: u-boot@lists.denx.de --- configs/dh_imx6_defconfig | 169 +++++++++++++------------------------- 1 file changed, 58 insertions(+), 111 deletions(-)
diff --git a/configs/dh_imx6_defconfig b/configs/dh_imx6_defconfig index 27dab9e2e95..f435ecc8450 100644 --- a/configs/dh_imx6_defconfig +++ b/configs/dh_imx6_defconfig @@ -1,132 +1,79 @@ +#include <configs/imx_dhsom_defconfig> + CONFIG_ARM=y -CONFIG_SPL_SYS_L2_PL310=y CONFIG_ARCH_MX6=y -CONFIG_TEXT_BASE=0x17800000 -CONFIG_SYS_MALLOC_F_LEN=0x1000 -CONFIG_SPL_GPIO=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=1 -CONFIG_SF_DEFAULT_SPEED=25000000 -CONFIG_ENV_SIZE=0x4000 -CONFIG_ENV_OFFSET=0x100000 -CONFIG_ENV_SECT_SIZE=0x10000 CONFIG_MX6QDL=y -CONFIG_MX6_DDRCAL=y CONFIG_TARGET_DHCOMIMX6=y -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="imx6q-dhcom-pdk2" +CONFIG_TEXT_BASE=0x17800000 CONFIG_SPL_TEXT_BASE=0x00908000 +CONFIG_SPL_SYS_L2_PL310=y +CONFIG_DEFAULT_DEVICE_TREE="imx6q-dhcom-pdk2" +CONFIG_MX6_DDRCAL=y +CONFIG_NR_DRAM_BANKS=1 CONFIG_OF_LIBFDT_OVERLAY=y -CONFIG_SYS_MONITOR_LEN=409600 -CONFIG_SPL_MMC=y -CONFIG_SPL_SERIAL=y -CONFIG_BOOTCOUNT_BOOTLIMIT=3 -CONFIG_SYS_BOOTCOUNT_ADDR=0x020CC068 -CONFIG_WATCHDOG_TIMEOUT_MSECS=60000 -CONFIG_SPL=y -CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y -CONFIG_ENV_OFFSET_REDUND=0x110000 -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI=y -CONFIG_AHCI=y -CONFIG_SYS_MEMTEST_START=0x10000000 -CONFIG_SYS_MEMTEST_END=0x20000000 -CONFIG_LTO=y -CONFIG_FIT=y +CONFIG_OF_LIST="imx6q-dhcom-pdk2 imx6dl-dhcom-pdk2 imx6s-dhcom-drc02 imx6dl-dhcom-picoitx" CONFIG_FIT_VERBOSE=y -CONFIG_SPL_FIT=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTDELAY=3 -CONFIG_SYS_PBSIZE=532 +CONFIG_MULTI_DTB_FIT=y +CONFIG_LTO=y + CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y -CONFIG_SPL_SYS_MALLOC=y -CONFIG_SPL_SPI_LOAD=y -CONFIG_SYS_SPI_U_BOOT_OFFS=0x11400 -CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_I2C_MXC=y +CONFIG_SYS_MALLOC_F_LEN=0x1000 CONFIG_SYS_MAXARGS=32 -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_UNZIP=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y +CONFIG_SYS_MEMTEST_END=0x20000000 +CONFIG_SYS_MEMTEST_START=0x10000000 +CONFIG_SYS_MONITOR_LEN=409600 +CONFIG_SYS_PBSIZE=532 + +CONFIG_SYS_BOOTCOUNT_ADDR=0x020CC068 +CONFIG_SYS_BOOTCOUNT_BE=y +CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_BOOTDELAY=3 + +CONFIG_BZIP2=y CONFIG_CMD_SATA=y -# CONFIG_CMD_SCSI is not set -CONFIG_CMD_USB=y -CONFIG_CMD_USB_MASS_STORAGE=y +CONFIG_CMD_UNZIP=y CONFIG_CMD_WDT=y -CONFIG_CMD_DHCP6=y -CONFIG_CMD_TFTPPUT=y -CONFIG_CMD_WGET=y -CONFIG_CMD_BOOTCOUNT=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_TIME=y -CONFIG_CMD_BTRFS=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_OF_CONTROL=y -CONFIG_OF_LIST="imx6q-dhcom-pdk2 imx6dl-dhcom-pdk2 imx6s-dhcom-drc02 imx6dl-dhcom-picoitx" -CONFIG_MULTI_DTB_FIT=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FEC" -CONFIG_VERSION_VARIABLE=y -CONFIG_ARP_TIMEOUT=200 -CONFIG_IP_DEFRAG=y -CONFIG_TFTP_TSIZE=y -CONFIG_PROT_TCP_SACK=y -CONFIG_IPV6=y +CONFIG_DISTRO_DEFAULTS=y + +CONFIG_ENV_OFFSET=0x100000 +CONFIG_ENV_OFFSET_REDUND=0x110000 +CONFIG_ENV_SECT_SIZE=0x10000 +CONFIG_ENV_SIZE=0x4000 + +# CONFIG_CMD_SCSI is not set +CONFIG_AHCI=y CONFIG_BOUNCE_BUFFER=y CONFIG_DWC_AHSATA=y CONFIG_LBA48=y -CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_SYS_BOOTCOUNT_BE=y -CONFIG_SYS_DFU_DATA_BUF_SIZE=0x1000000 -CONFIG_DM_I2C=y -CONFIG_SYS_I2C_MXC=y -CONFIG_MISC=y -CONFIG_I2C_EEPROM=y -CONFIG_FSL_USDHC=y -CONFIG_MTD=y -CONFIG_DM_SPI_FLASH=y -CONFIG_SPI_FLASH_SFDP_SUPPORT=y +CONFIG_SCSI=y + +CONFIG_ARP_TIMEOUT=200 +CONFIG_ETHPRIME="FEC" +CONFIG_USE_ETHPRIME=y +CONFIG_PHYLIB=y + +CONFIG_SF_DEFAULT_SPEED=25000000 CONFIG_SPI_FLASH_GIGADEVICE=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_WINBOND=y -CONFIG_SPI_FLASH_MTD=y -CONFIG_PHYLIB=y -CONFIG_PHY_MICREL=y -CONFIG_PHY_MICREL_KSZ90X1=y -CONFIG_FEC_MXC=y -CONFIG_MII=y -CONFIG_PINCTRL=y +CONFIG_SPI_FLASH_UNLOCK_ALL=y + +CONFIG_MISC=y + CONFIG_PINCTRL_IMX6=y -CONFIG_DM_REGULATOR=y -CONFIG_DM_REGULATOR_FIXED=y -CONFIG_SCSI=y -CONFIG_DM_SERIAL=y -CONFIG_MXC_UART=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_MXC_SPI=y -CONFIG_SYSRESET=y -CONFIG_SYSRESET_WATCHDOG=y -CONFIG_USB=y -CONFIG_SPL_USB_HOST=y -CONFIG_USB_HOST_ETHER=y -CONFIG_USB_ETHER_ASIX=y -CONFIG_USB_GADGET=y + +CONFIG_SDP_LOADADDR=0x17ffffc0 +CONFIG_SPL_FIT=y +CONFIG_SPL_SPI=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_LOAD=y CONFIG_SPL_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="dh" -CONFIG_USB_GADGET_VENDOR_NUM=0x0525 -CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 +CONFIG_SPL_USB_HOST=y +CONFIG_SPL_USB_SDP_SUPPORT=y +CONFIG_SYS_DFU_DATA_BUF_SIZE=0x1000000 +CONFIG_SYS_SPI_U_BOOT_OFFS=0x11400 CONFIG_CI_UDC=y -CONFIG_SDP_LOADADDR=0x17ffffc0 CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_SPL_USB_SDP_SUPPORT=y -CONFIG_IMX_WATCHDOG=y -CONFIG_BZIP2=y + +CONFIG_WATCHDOG_TIMEOUT_MSECS=60000