Hi,
Thanks for your reply
2010/11/19 Premi, Sanjeev premi@ti.com:
-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of Enric Balletbò i Serra Sent: Friday, November 19, 2010 2:42 PM To: u-boot@lists.denx.de; Steve Sakoman Subject: [U-Boot] AM/DM37X How to configure registers to get 1000MHz
Hi all,
I would ask a question, maybe someone can help, which is the better way to configure the PRCM registers to get 1000MHz on AM/DM37X processor ?
You need set the multipliers and dividers apprioriately - based on the sysclk.
Would help to understand the context of "better"?
I'm thinking in two scenarios :
1. For OMAP35X there are devices that support 600MHz as max frequency but others supports 720MHz, I want to set by default 600MHz and if device supports 720MHz change to this frequency. 2. For AM/DM37X, maybe I'm wrong, but the default frequency for AM/DM37X is set to 600MHz, Like OMAP35X i want to set default to 800MHz and i device supports change to 1000MHz.
Which is the better way to do this ?
Thanks in advance, Enric
~sanjeev
Thanks in advance, Enric _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot