The pinmux for usb0 is missing from the Linux board dtb file. Remove it until we can introduce it in Linux
Tested-by: Tom Rini trini@konsulko.com Signed-off-by: Bryan Brattlof bb@ti.com --- arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 12 -------- arch/arm/dts/k3-am654-r5-base-board.dts | 29 -------------------- 2 files changed, 41 deletions(-)
diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi index a24cb895e5578..3647088c29e4b 100644 --- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi +++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi @@ -125,10 +125,6 @@ bootph-pre-ram; };
-&usb0_pins_default { - bootph-pre-ram; -}; - &main_pmx1 { bootph-pre-ram; }; @@ -161,14 +157,6 @@ bootph-pre-ram; };
-&usb0_phy { - bootph-pre-ram; -}; - -&usb0 { - bootph-pre-ram; -}; - &scm_conf { bootph-pre-ram; }; diff --git a/arch/arm/dts/k3-am654-r5-base-board.dts b/arch/arm/dts/k3-am654-r5-base-board.dts index da41971a78f81..8e57c77cba923 100644 --- a/arch/arm/dts/k3-am654-r5-base-board.dts +++ b/arch/arm/dts/k3-am654-r5-base-board.dts @@ -18,8 +18,6 @@ ethernet0 = &cpsw_port1; remoteproc0 = &sysctrler; remoteproc1 = &a53_0; - usb0 = &usb0; - usb1 = &usb1; };
a53_0: a53@0 { @@ -114,14 +112,6 @@ }; };
-&main_pmx0 { - usb0_pins_default: usb0_pins_default { - pinctrl-single,pins = < - AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */ - >; - }; -}; - &memorycontroller { vtt-supply = <&vtt_supply>; pinctrl-names = "default"; @@ -161,14 +151,6 @@ <0x0 0x50000000 0x0 0x8000000>; };
-&main_pmx0 { - usb0_pins_default: usb0_pins_default { - pinctrl-single,pins = < - AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */ - >; - }; -}; - &dwc3_0 { status = "okay"; /delete-property/ clocks; @@ -177,17 +159,6 @@ /delete-property/ assigned-clock-parents; };
-&usb0_phy { - status = "okay"; - /delete-property/ clocks; -}; - -&usb0 { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_pins_default>; - dr_mode = "peripheral"; -}; - &davinci_mdio { phy0: ethernet-phy@0 { reg = <0>;