From: Scott Wood scottwood@freescale.com
Enable NAND boot support using SPL framework. To boot from NAND, either use DIP switches on board, or "qixis_reset nand" command. Details of forming NAND image can be found in README.
Signed-off-by: Scott Wood scottwood@freescale.com Signed-off-by: York Sun yorksun@freescale.com
---
Changes in v5: Fix signed-off-by signature Update LS2085ARDB README to include instructions to form NAND image
Changes in v4: Update MAINTAINERS file
Changes in v3: None Changes in v2: None
arch/arm/Kconfig | 1 + board/freescale/ls2085ardb/MAINTAINERS | 1 + board/freescale/ls2085ardb/README | 19 +++++++++++++++ board/freescale/ls2085ardb/ddr.c | 4 ++++ configs/ls2085ardb_nand_defconfig | 4 ++++ include/configs/ls2085ardb.h | 40 ++++++++++++++++++++++++++++---- 6 files changed, 64 insertions(+), 5 deletions(-) create mode 100644 configs/ls2085ardb_nand_defconfig
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f73541c..cf291c8 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -663,6 +663,7 @@ config TARGET_LS2085ARDB bool "Support ls2085ardb" select ARM64 select ARMV8_MULTIENTRY + select SUPPORT_SPL help Support for Freescale LS2085ARDB platform. The LS2085A Reference design board (RDB) is a high-performance diff --git a/board/freescale/ls2085ardb/MAINTAINERS b/board/freescale/ls2085ardb/MAINTAINERS index 436039f..d5cce40 100644 --- a/board/freescale/ls2085ardb/MAINTAINERS +++ b/board/freescale/ls2085ardb/MAINTAINERS @@ -5,3 +5,4 @@ F: board/freescale/ls2085ardb/ F: board/freescale/ls2085a/ls2085ardb.c F: include/configs/ls2085ardb.h F: configs/ls2085ardb_defconfig +F: configs/ls2085ardb_nand_defconfig diff --git a/board/freescale/ls2085ardb/README b/board/freescale/ls2085ardb/README index cfd5185..5a5171c 100644 --- a/board/freescale/ls2085ardb/README +++ b/board/freescale/ls2085ardb/README @@ -107,3 +107,22 @@ Booting Options --------------- a) NOR boot b) NAND boot + +Generage NAND image +------------------- +To form the NAND image, build u-boot with LS2085ARDB_NAND_defconfig. +Append u-boot-with-spl.bin after RCW image. The RCW image should +have these PBI commands + +1) CCSR 4-byte write to 0x00e00404, data=0x00000000 +2) CCSR 4-byte write to 0x00e00400, data=0x1800a000 +3) Block Copy: SRC=0x0104, SRC_ADDR=0x000000c0, DEST_ADDR=0x1800a000, +BLOCK_SIZE=0x00014000 + +These PBI commands set the bootloc registers to OCRAM address 0x1800a000 +and the SPL image is copied from the combined image into OCRAM. + +The SRC_ADDR should match the size of RCW image, i.e. it is the offset +of u-boot-with-spl.bin in the NAND image. If putting RCW in a separated +block is desired, the offset needs adjustment. Padding between the end +of RCW and the start of u-boot image may be required. diff --git a/board/freescale/ls2085ardb/ddr.c b/board/freescale/ls2085ardb/ddr.c index 6cd5e8b..8d71ae1 100644 --- a/board/freescale/ls2085ardb/ddr.c +++ b/board/freescale/ls2085ardb/ddr.c @@ -147,9 +147,13 @@ phys_size_t initdram(int board_type) { phys_size_t dram_size;
+#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD) + return fsl_ddr_sdram_size(); +#else puts("Initializing DDR....using SPD\n");
dram_size = fsl_ddr_sdram(); +#endif
return dram_size; } diff --git a/configs/ls2085ardb_nand_defconfig b/configs/ls2085ardb_nand_defconfig new file mode 100644 index 0000000..39ba8c5 --- /dev/null +++ b/configs/ls2085ardb_nand_defconfig @@ -0,0 +1,4 @@ ++S:CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,NAND" ++S:CONFIG_SPL=y ++S:CONFIG_ARM=y ++S:CONFIG_TARGET_LS2085ARDB=y diff --git a/include/configs/ls2085ardb.h b/include/configs/ls2085ardb.h index 0a5873b..e97f054 100644 --- a/include/configs/ls2085ardb.h +++ b/include/configs/ls2085ardb.h @@ -139,11 +139,13 @@ unsigned long get_board_sys_clk(void); #define QIXIS_LBMAP_SHIFT 0 #define QIXIS_LBMAP_DFLTBANK 0x00 #define QIXIS_LBMAP_ALTBANK 0x04 +#define QIXIS_LBMAP_NAND 0x09 #define QIXIS_RST_CTL_RESET 0x31 #define QIXIS_RST_CTL_RESET_EN 0x30 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 +#define QIXIS_RCW_SRC_NAND 0x119 #define QIXIS_RST_FORCE_MEM 0x01
#define CONFIG_SYS_CSPR3_EXT (0x0) @@ -169,6 +171,33 @@ unsigned long get_board_sys_clk(void); FTIM2_GPCM_TWP(0x3E)) #define CONFIG_SYS_CS3_FTIM3 0x0
+#if defined(CONFIG_SPL) && defined(CONFIG_NAND) +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR_EARLY +#define CONFIG_SYS_CSPR2_FINAL CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 + +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET (1536 * 1024) +#define CONFIG_ENV_SECT_SIZE 0x20000 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_SPL_PAD_TO 0x7ff40 +#define CONFIG_SYS_NAND_U_BOOT_OFFS (512 * 1024) +#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 * 1024) +#else #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR_EARLY #define CONFIG_SYS_CSPR0_FINAL CONFIG_SYS_NOR0_CSPR @@ -187,6 +216,12 @@ unsigned long get_board_sys_clk(void); #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3
+#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000) +#define CONFIG_ENV_SECT_SIZE 0x20000 +#define CONFIG_ENV_SIZE 0x2000 +#endif + /* Debug Server firmware */ #define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR #define CONFIG_SYS_DEBUG_SERVER_FW_ADDR 0x580D00000ULL @@ -232,11 +267,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
-#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000) -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_SIZE 0x2000 - #define CONFIG_FSL_MEMAC #define CONFIG_PCI /* Enable PCIE */ #define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */