-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of Wolfgang Denk Sent: Thursday, August 06, 2009 2:37 AM To: Ben Warren Cc: U-Boot ML Subject: Re: [U-Boot] [PATCH 2/3]: arm: Kirkwood: Check the error summary bit for error detection
Dear Ben,
In message 20090702150303.53c40e14@marrow.netinsight.se Simon Kagstrom wrote:
Check the error summary bit for error detection
The Marvell documentation for the 88f6281 states that the
error coding
is only valid if the error summary and last frame bits in
the transmit
descriptor status field are set. This patch adds checks for
these for
transmit (I would get transmit errors on bootp with the
current check,
which I believe are spurious).
Signed-off-by: Simon Kagstrom simon.kagstrom@netinsight.net
drivers/net/kirkwood_egiga.c | 4 +++- drivers/net/kirkwood_egiga.h | 1 + 2 files changed, 4 insertions(+), 1 deletions(-)
Ping?
This patch is already applied Regards.. Prafulla . .
Best regards,
Wolfgang Denk
-- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de It's hard to make a program foolproof because fools are so ingenious. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot