Add support for coral which is a range of Apollo Lake-based Chromebook released in 2017. This also includes reef released in 2016, since it is based on the same SoC.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v4: - Add u-boot,skip-auto-config-until-reloc property to PCI - Drop duplicate commit 'Create a new sandbox_pci_read_bar() function' - New GPIO driver binding - Set up LPC pads early - Switch over to use pinctrl for pad init/config - Update documentation with more detailed memory map - Use hyphen for device-tree properties - apollolake -> Apollo Lake
Changes in v3: - Ad FSP-S support - Add CONFIG_TPL_X86_ASSUME_CPUID to reduce code size - Add Chrome OS EC support - Add a proper SPI node and make the SPI flash node a child - Add bootstage support - Add more documentation - Add spi alias in device tree - Disable the bootcommand since it does nothing useful on coral - Don't enable SPI flash in TPL by default - Drop CONFIG_SPL_NET_SUPPORT - Drop patch '86: timer: Reduce timer code size in TPL on Intel CPUs' - Drop patch 'dm: core: Don't include ofnode functions with of-platdata' - Drop patch 'spi: sandbox: Add a test driver for sandbox SPI flash' - Drop patch 'spl: Allow SPL/TPL to use of-platdata without libfdt' - Drop patch 'x86: apollolake: Add definitions for the Intel Fast SPI interface' - Drop patch 'x86: timer: Set up the timer in timer_early_get_count()' - Enable video and USB3 - Reduce amount of early-pad data in TPL - Tidy up the pad settings in the device tree - Use a zero-based tsc timer
Changes in v2: None
arch/x86/dts/Makefile | 1 + arch/x86/dts/chromebook_coral.dts | 823 ++++++++++++++++++++++ board/google/Kconfig | 15 + board/google/chromebook_coral/Kconfig | 43 ++ board/google/chromebook_coral/MAINTAINERS | 6 + board/google/chromebook_coral/Makefile | 5 + board/google/chromebook_coral/coral.c | 18 + configs/chromebook_coral_defconfig | 102 +++ doc/board/google/chromebook_coral.rst | 241 +++++++ include/configs/chromebook_coral.h | 32 + 10 files changed, 1286 insertions(+) create mode 100644 arch/x86/dts/chromebook_coral.dts create mode 100644 board/google/chromebook_coral/Kconfig create mode 100644 board/google/chromebook_coral/MAINTAINERS create mode 100644 board/google/chromebook_coral/Makefile create mode 100644 board/google/chromebook_coral/coral.c create mode 100644 configs/chromebook_coral_defconfig create mode 100644 doc/board/google/chromebook_coral.rst create mode 100644 include/configs/chromebook_coral.h
diff --git a/arch/x86/dts/Makefile b/arch/x86/dts/Makefile index d4bdf62be6..be209aaaf8 100644 --- a/arch/x86/dts/Makefile +++ b/arch/x86/dts/Makefile @@ -2,6 +2,7 @@
dtb-y += bayleybay.dtb \ cherryhill.dtb \ + chromebook_coral.dtb \ chromebook_link.dtb \ chromebox_panther.dtb \ chromebook_samus.dtb \ diff --git a/arch/x86/dts/chromebook_coral.dts b/arch/x86/dts/chromebook_coral.dts new file mode 100644 index 0000000000..daf35cb29c --- /dev/null +++ b/arch/x86/dts/chromebook_coral.dts @@ -0,0 +1,823 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/dts-v1/; + +#include <dt-bindings/gpio/x86-gpio.h> + +/include/ "skeleton.dtsi" +/include/ "keyboard.dtsi" +/include/ "reset.dtsi" +/include/ "rtc.dtsi" +/include/ "tsc_timer.dtsi" + +#ifdef CONFIG_CHROMEOS +#include "chromeos-x86.dtsi" +#include "flashmap-x86-ro.dtsi" +#include "flashmap-16mb-rw.dtsi" +#endif + +#include <asm/intel_pinctrl_defs.h> +#include <asm/arch-apollolake/cpu.h> +#include <asm/arch-apollolake/gpio.h> +#include <asm/arch-apollolake/iomap.h> +#include <asm/arch-apollolake/pm.h> + +/ { + model = "Google Coral"; + compatible = "google,coral", "intel,apollolake"; + + aliases { + cros-ec0 = &cros_ec; + fsp = &fsp_s; + spi0 = &spi; + }; + + config { + silent_console = <0>; + }; + + chosen { + stdout-path = &serial; + }; + + cpus { + u-boot,dm-pre-reloc; + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + u-boot,dm-pre-reloc; + device_type = "cpu"; + compatible = "intel,apl-cpu"; + reg = <0>; + intel,apic-id = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "intel,apl-cpu"; + reg = <1>; + intel,apic-id = <1>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "intel,apl-cpu"; + reg = <2>; + intel,apic-id = <2>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "intel,apl-cpu"; + reg = <3>; + intel,apic-id = <3>; + }; + + }; + + keyboard { + intel,duplicate-por; + }; + + pci { + compatible = "pci-x86"; + #address-cells = <3>; + #size-cells = <2>; + u-boot,dm-pre-reloc; + ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0 0x10000000 + 0x42000000 0x0 0xb0000000 0xb0000000 0 0x10000000 + 0x01000000 0x0 0x1000 0x1000 0 0xefff>; + u-boot,skip-auto-config-until-reloc; + + host_bridge: host-bridge@0,0 { + u-boot,dm-pre-reloc; + reg = <0x00000000 0 0 0 0>; + compatible = "intel,apl-hostbridge"; + pciex-region-size = <0x10000000>; + /* + * Parameters used by the FSP-S binary blob. This is + * really unfortunate since these parameters mostly + * relate to drivers but we need them in one place. We + * could put them in the driver nodes easily, but then + * would have to scan each node to find them. So just + * dump them here for now. + */ + fsp_s: fsp-s { + }; + }; + + punit@0,1 { + u-boot,dm-pre-reloc; + reg = <0x00000800 0 0 0 0>; + compatible = "intel,apl-punit"; + }; + + p2sb: p2sb@d,0 { + u-boot,dm-pre-reloc; + reg = <0x02006810 0 0 0 0>; + compatible = "intel,apl-p2sb"; + early-regs = <IOMAP_P2SB_BAR 0x100000>; + + n { + compatible = "intel,apl-pinctrl"; + u-boot,dm-pre-reloc; + intel,p2sb-port-id = <PID_GPIO_N>; + gpio_n: gpio-n { + compatible = "intel,apl-gpio"; + u-boot,dm-pre-reloc; + #gpio-cells = <2>; + }; + }; + + nw { + u-boot,dm-pre-reloc; + compatible = "intel,apl-pinctrl"; + intel,p2sb-port-id = <PID_GPIO_NW>; + #gpio-cells = <2>; + gpio_nw: gpio-nw { + compatible = "intel,apl-gpio"; + u-boot,dm-pre-reloc; + #gpio-cells = <2>; + }; + }; + + w { + u-boot,dm-pre-reloc; + compatible = "intel,apl-pinctrl"; + intel,p2sb-port-id = <PID_GPIO_W>; + #gpio-cells = <2>; + gpio_w: gpio-w { + compatible = "intel,apl-gpio"; + u-boot,dm-pre-reloc; + #gpio-cells = <2>; + }; + }; + + sw { + u-boot,dm-pre-reloc; + compatible = "intel,apl-pinctrl"; + intel,p2sb-port-id = <PID_GPIO_SW>; + #gpio-cells = <2>; + gpio_sw: gpio-sw { + compatible = "intel,apl-gpio"; + u-boot,dm-pre-reloc; + #gpio-cells = <2>; + }; + }; + + itss { + u-boot,dm-pre-reloc; + compatible = "intel,apl-itss"; + intel,p2sb-port-id = <PID_ITSS>; + intel,pmc-routes = < + PMC_GPE_SW_31_0 GPIO_GPE_SW_31_0 + PMC_GPE_SW_63_32 GPIO_GPE_SW_63_32 + PMC_GPE_NW_31_0 GPIO_GPE_NW_31_0 + PMC_GPE_NW_63_32 GPIO_GPE_NW_63_32 + PMC_GPE_NW_95_64 GPIO_GPE_NW_95_64 + PMC_GPE_N_31_0 GPIO_GPE_N_31_0 + PMC_GPE_N_63_32 GPIO_GPE_N_63_32 + PMC_GPE_W_31_0 GPIO_GPE_W_31_0>; + }; + }; + + pmc@d,1 { + u-boot,dm-pre-reloc; + reg = <0x6900 0 0 0 0>; + + /* + * Values for BAR0, BAR2 and ACPI_BASE for when PCI + * auto-configure is not available + */ + early-regs = <0xfe042000 0x2000 + 0xfe044000 0x2000 + 0x400 0x100>; + compatible = "intel,apl-pmc"; + gpe0-dwx-mask = <0xf>; + gpe0-dwx-shift-base = <4>; + + /* + * GPE configuration + * Note that GPE events called out in ASL code rely on + * this route, i.e., if this route changes then the + * affected GPE * offset bits also need to be changed. + * This sets the PMC register GPE_CFG fields. + */ + gpe0-dw = <PMC_GPE_N_31_0 + PMC_GPE_N_63_32 + PMC_GPE_SW_31_0>; + gpe0-sts = <0x20>; + gpe0-en = <0x30>; + }; + + spi: fast-spi@d,2 { + u-boot,dm-pre-reloc; + reg = <0x02006a10 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,fast-spi"; + early-regs = <IOMAP_SPI_BASE 0x1000>; + intel,hardware-seq = <1>; + + fwstore_spi: spi-flash@0 { + #size-cells = <1>; + #address-cells = <1>; + u-boot,dm-pre-reloc; + reg = <0>; + compatible = "winbond,w25q128fw", + "jedec,spi-nor"; + rw-mrc-cache { + label = "rw-mrc-cache"; + reg = <0x008e0000 0x00010000>; + u-boot,dm-pre-reloc; + }; + rw-var-mrc-cache { + label = "rw-mrc-cache"; + reg = <0x008f0000 0x0001000>; + u-boot,dm-pre-reloc; + }; + }; + }; + + serial: serial@18,2 { + reg = <0x0200c210 0 0 0 0>; + u-boot,dm-pre-reloc; + compatible = "intel,apl-ns16550"; + early-regs = <0xde000000 0x20>; + reg-shift = <2>; + clock-frequency = <1843200>; + current-speed = <115200>; + }; + + pch: pch@1f,0 { + reg = <0x0000f800 0 0 0 0>; + compatible = "intel,apl-pch"; + u-boot,dm-pre-reloc; + #address-cells = <1>; + #size-cells = <1>; + + lpc { + compatible = "intel,apl-lpc"; + #address-cells = <1>; + #size-cells = <0>; + u-boot,dm-pre-reloc; + cros_ec: cros-ec { + u-boot,dm-pre-reloc; + compatible = "google,cros-ec-lpc"; + reg = <0x204 1 0x200 1 0x880 0x80>; + + /* + * Describes the flash memory within + * the EC + */ + #address-cells = <1>; + #size-cells = <1>; + flash@8000000 { + reg = <0x08000000 0x20000>; + erase-value = <0xff>; + }; + }; + }; + }; + }; + +}; + +&host_bridge { + /* + * PL1 override 12000 mW: the energy calculation is wrong with the + * current VR solution. Experiments show that SoC TDP max (6W) can be + * reached when RAPL PL1 is set to 12W. Set RAPL PL2 to 15W. + */ + tdp-pl-override-mw = <12000 15000>; + + early-pads = < + /* These two are for the debug UART */ + GPIO_46 /* UART2 RX */ + (PAD_CFG0_MODE_NF1 | PAD_CFG0_LOGICAL_RESET_DEEP) + (PAD_CFG1_PULL_NATIVE | PAD_CFG1_IOSSTATE_TX_LAST_RXE) + + GPIO_47 /* UART2 TX */ + (PAD_CFG0_MODE_NF1 | PAD_CFG0_LOGICAL_RESET_DEEP) + (PAD_CFG1_PULL_NATIVE | PAD_CFG1_IOSSTATE_TX_LAST_RXE) + + GPIO_75 /* I2S1_BCLK -- PCH_WP */ + (PAD_CFG0_MODE_GPIO | PAD_CFG0_LOGICAL_RESET_DEEP) + (PAD_CFG1_PULL_UP_20K | PAD_CFG1_IOSSTATE_TXD_RXE) + + /* I2C2 - TPM */ + GPIO_128 /* LPSS_I2C2_SDA */ + (PAD_CFG0_MODE_NF1 | PAD_CFG0_LOGICAL_RESET_DEEP) + (PAD_CFG1_PULL_UP_2K | PAD_CFG1_IOSSTATE_TX_LAST_RXE) + GPIO_129 /* LPSS_I2C2_SCL */ + (PAD_CFG0_MODE_NF1 | PAD_CFG0_LOGICAL_RESET_DEEP) + (PAD_CFG1_PULL_UP_2K | PAD_CFG1_IOSSTATE_TX_LAST_RXE) + GPIO_28 /* TPM IRQ */ + (PAD_CFG0_MODE_GPIO | PAD_CFG0_LOGICAL_RESET_DEEP | + PAD_CFG0_TX_DISABLE | PAD_CFG0_ROUTE_IOAPIC | + PAD_CFG0_TRIG_LEVEL | PAD_CFG0_RX_POL_INVERT) + (PAD_CFG1_PULL_NONE | PAD_CFG1_IOSSTATE_TXD_RXE) + + /* + * WLAN_PE_RST - default to deasserted just in case FSP + * misbehaves + */ + GPIO_122 /* SIO_SPI_2_RXD */ + (PAD_CFG0_MODE_GPIO | PAD_CFG0_LOGICAL_RESET_DEEP | + PAD_CFG0_RX_DISABLE | 0) + (PAD_CFG1_PULL_NONE | PAD_CFG1_IOSSTATE_TX_LAST_RXE) + + /* LPC */ + PAD_CFG_NF(LPC_ILB_SERIRQ, UP_20K, DEEP, NF1) /* LPC_SERIRQ */ + PAD_CFG_NF(LPC_CLKOUT0, NONE, DEEP, NF1) /* LPC_CLKOUT0 */ + PAD_CFG_NF(LPC_CLKOUT1, UP_20K, DEEP, NF1) + PAD_CFG_NF(LPC_AD0, UP_20K, DEEP, NF1) /* LPC_AD0 */ + PAD_CFG_NF(LPC_AD1, UP_20K, DEEP, NF1) /* LPC_AD1 */ + PAD_CFG_NF(LPC_AD2, UP_20K, DEEP, NF1) /* LPC_AD2 */ + PAD_CFG_NF(LPC_AD3, UP_20K, DEEP, NF1) /* LPC_AD3 */ + PAD_CFG_NF(LPC_CLKRUNB, UP_20K, DEEP, NF1) /* LPC_CLKRUN_N */ + PAD_CFG_NF(LPC_FRAMEB, NATIVE, DEEP, NF1) /* LPC_FRAME_N */ + >; + + lpddr4-swizzle = /bits/ 8 < + /* LP4_PHYS_CH0A */ + + /* DQA[0:7] pins of LPDDR4 module */ + 6 7 5 4 3 1 0 2 + /* DQA[8:15] pins of LPDDR4 module */ + 12 10 11 13 14 8 9 15 + /* DQB[0:7] pins of LPDDR4 module with offset of 16 */ + 16 22 23 20 18 17 19 21 + /* DQB[7:15] pins of LPDDR4 module with offset of 16 */ + 30 28 29 25 24 26 27 31 + + /* LP4_PHYS_CH0B */ + /* DQA[0:7] pins of LPDDR4 module */ + 7 3 5 2 6 0 1 4 + /* DQA[8:15] pins of LPDDR4 module */ + 9 14 12 13 10 11 8 15 + /* DQB[0:7] pins of LPDDR4 module with offset of 16 */ + 20 22 23 16 19 17 18 21 + /* DQB[7:15] pins of LPDDR4 module with offset of 16 */ + 28 24 26 27 29 30 31 25 + + /* LP4_PHYS_CH1A */ + + /* DQA[0:7] pins of LPDDR4 module */ + 2 1 6 7 5 4 3 0 + /* DQA[8:15] pins of LPDDR4 module */ + 11 10 8 9 12 15 13 14 + /* DQB[0:7] pins of LPDDR4 module with offset of 16 */ + 17 23 19 16 21 22 20 18 + /* DQB[7:15] pins of LPDDR4 module with offset of 16 */ + 31 29 26 25 28 27 24 30 + + /* LP4_PHYS_CH1B */ + + /* DQA[0:7] pins of LPDDR4 module */ + 4 3 7 5 6 1 0 2 + /* DQA[8:15] pins of LPDDR4 module */ + 15 9 8 11 14 13 12 10 + /* DQB[0:7] pins of LPDDR4 module with offset of 16 */ + 20 23 22 21 18 19 16 17 + /* DQB[7:15] pins of LPDDR4 module with offset of 16 */ + 25 28 30 31 26 27 24 29>; +}; + +&fsp_s { + u-boot,dm-pre-proper; + + /* Disable unused clkreq of PCIe root ports */ + pcie-rp-clkreq-pin = /bits/ 8 <0 /* wifi/bt */ + CLKREQ_DISABLED + CLKREQ_DISABLED + CLKREQ_DISABLED + CLKREQ_DISABLED + CLKREQ_DISABLED>; + + /* + * GPIO for PERST_0 + * If the Board has PERST_0 signal, assign the GPIO + * If the Board does not have PERST_0, assign GPIO_PRT0_UDEF + */ + prt0-gpio = <GPIO_122>; + /* GPIO for SD card detect */ + sdcard-cd-gpio = <GPIO_177>; + + /* + * Order is emmc-tx-data-cntl1, emmc-tx-data-cntl2, + * emmc-rx-cmd-data-cntl1, emmc-rx-cmd-data-cntl2 + * + * EMMC TX DATA Delay 1 + * Refer to EDS-Vol2-22.3 + * [14:8] steps of delay for HS400, each 125ps + * [6:0] steps of delay for SDR104/HS200, each 125ps + + /* + * EMMC TX DATA Delay 2 + * Refer to EDS-Vol2-22.3. + * [30:24] steps of delay for SDR50, each 125ps + * [22:16] steps of delay for DDR50, each 125ps + * [14:8] steps of delay for SDR25/HS50, each 125ps + * [6:0] steps of delay for SDR12, each 125ps + */ + + /* + * EMMC RX CMD/DATA Delay 1 + * Refer to EDS-Vol2-22.3. + * [30:24] steps of delay for SDR50, each 125ps + * [22:16] steps of delay for DDR50, each 125ps + * [14:8] steps of delay for SDR25/HS50, each 125ps + * [6:0] steps of delay for SDR12, each 125ps + */ + + /* + * EMMC RX CMD/DATA Delay 2 + * Refer to EDS-Vol2-22.3. + * [17:16] stands for Rx Clock before Output Buffer + * [14:8] steps of delay for Auto Tuning Mode, each 125ps + * [6:0] steps of delay for HS200, each 125ps + */ + emmc = <0x0c16 0x28162828 0x00181717 0x10008>; + + /* Enable DPTF */ + dptf-enable; + + /* Enable Audio Clock and Power gating */ + hdaudio-clk-gate-enable; + hdaudio-pwr-gate-enable; + hdaudio-bios-config-lockdown; + + /* Enable lpss s0ix */ + lpss-s0ix-enable; + + /* + * TODO(sjg@chromium.org): Move this to the I2C nodes + * Intel Common SoC Config + *+-------------------+---------------------------+ + *| Field | Value | + *+-------------------+---------------------------+ + *| I2C0 | Audio | + *| I2C2 | TPM | + *| I2C3 | Touchscreen | + *| I2C4 | Trackpad | + *| I2C5 | Digitizer | + *+-------------------+---------------------------+ + * + common_soc_config" = "{ + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise-time-ns = 104, + .fall-time-ns = 52, + }, + .i2c[2] = { + .early_init = 1, + .speed = I2C_SPEED_FAST, + .rise-time-ns = 57, + .fall-time-ns = 28, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .rise-time-ns = 76, + .fall-time-ns = 164, + }, + .i2c[4] = { + .speed = I2C_SPEED_FAST, + .rise-time-ns = 114, + .fall-time-ns = 164, + .data_hold_time_ns = 350, + }, + .i2c[5] = { + .speed = I2C_SPEED_FAST, + .rise-time-ns = 152, + .fall-time-ns = 30, + }, + }" + */ + + /* Minimum SLP S3 assertion width 28ms */ + slp-s3-assertion-width-usecs = <28000>; + + pads = < + /* PCIE_WAKE[0:3]_N */ + PAD_CFG_GPI_SCI_LOW(GPIO_205, UP_20K, DEEP, EDGE_SINGLE) /* WLAN */ + PAD_CFG_GPI(GPIO_206, UP_20K, DEEP) /* Unused */ + PAD_CFG_GPI(GPIO_207, UP_20K, DEEP) /* Unused */ + PAD_CFG_GPI(GPIO_208, UP_20K, DEEP) /* Unused */ + + /* EMMC interface */ + PAD_CFG_NF(GPIO_156, DN_20K, DEEP, NF1) /* EMMC_CLK */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_157, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D0 */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_158, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D1 */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_159, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D2 */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_160, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D3 */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_161, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D4 */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_162, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D5 */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_163, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D6 */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_164, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D7 */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_165, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_CMD */ + PAD_CFG_NF(GPIO_182, DN_20K, DEEP, NF1) /* EMMC_RCLK */ + + /* SDIO -- unused */ + PAD_CFG_GPI(GPIO_166, UP_20K, DEEP) /* SDIO_CLK */ + PAD_CFG_GPI(GPIO_167, UP_20K, DEEP) /* SDIO_D0 */ + /* Configure SDIO to enable power gating */ + PAD_CFG_NF(GPIO_168, UP_20K, DEEP, NF1) /* SDIO_D1 */ + PAD_CFG_GPI(GPIO_169, UP_20K, DEEP) /* SDIO_D2 */ + PAD_CFG_GPI(GPIO_170, UP_20K, DEEP) /* SDIO_D3 */ + PAD_CFG_GPI(GPIO_171, UP_20K, DEEP) /* SDIO_CMD */ + + /* SDCARD */ + /* Pull down clock by 20K */ + PAD_CFG_NF(GPIO_172, DN_20K, DEEP, NF1) /* SDCARD_CLK */ + PAD_CFG_NF(GPIO_173, UP_20K, DEEP, NF1) /* SDCARD_D0 */ + PAD_CFG_NF(GPIO_174, UP_20K, DEEP, NF1) /* SDCARD_D1 */ + PAD_CFG_NF(GPIO_175, UP_20K, DEEP, NF1) /* SDCARD_D2 */ + PAD_CFG_NF(GPIO_176, UP_20K, DEEP, NF1) /* SDCARD_D3 */ + /* Card detect is active LOW with external pull up */ + PAD_CFG_NF(GPIO_177, NONE, DEEP, NF1) /* SDCARD_CD_N */ + PAD_CFG_NF(GPIO_178, UP_20K, DEEP, NF1) /* SDCARD_CMD */ + /* CLK feedback, internal signal, needs 20K pull down */ + PAD_CFG_NF(GPIO_179, DN_20K, DEEP, NF1) /* SDCARD_CLK_FB */ + /* No h/w write proect for uSD cards, pull down by 20K */ + PAD_CFG_NF(GPIO_186, DN_20K, DEEP, NF1) /* SDCARD_LVL_WP */ + /* EN_SD_SOCKET_PWR_L for SD slot power control. Default on */ + PAD_CFG_GPO(GPIO_183, 0, DEEP) /* SDIO_PWR_DOWN_N */ + + /* SMBus -- unused */ + PAD_CFG_GPI(SMB_ALERTB, UP_20K, DEEP) /* SMB_ALERT _N */ + PAD_CFG_GPI(SMB_CLK, UP_20K, DEEP) /* SMB_CLK */ + PAD_CFG_GPI(SMB_DATA, UP_20K, DEEP) /* SMB_DATA */ + + /* LPC */ + PAD_CFG_NF(LPC_ILB_SERIRQ, UP_20K, DEEP, NF1) /* LPC_SERIRQ */ + PAD_CFG_NF(LPC_CLKOUT0, NONE, DEEP, NF1) /* LPC_CLKOUT0 */ + PAD_CFG_NF(LPC_CLKOUT1, UP_20K, DEEP, NF1) + PAD_CFG_NF(LPC_AD0, UP_20K, DEEP, NF1) /* LPC_AD0 */ + PAD_CFG_NF(LPC_AD1, UP_20K, DEEP, NF1) /* LPC_AD1 */ + PAD_CFG_NF(LPC_AD2, UP_20K, DEEP, NF1) /* LPC_AD2 */ + PAD_CFG_NF(LPC_AD3, UP_20K, DEEP, NF1) /* LPC_AD3 */ + PAD_CFG_NF(LPC_CLKRUNB, UP_20K, DEEP, NF1) /* LPC_CLKRUN_N */ + PAD_CFG_NF(LPC_FRAMEB, NATIVE, DEEP, NF1) /* LPC_FRAME_N */ + + /* I2C0 - Audio */ + PAD_CFG_NF(GPIO_124, UP_2K, DEEP, NF1) /* LPSS_I2C0_SDA */ + PAD_CFG_NF(GPIO_125, UP_2K, DEEP, NF1) /* LPSS_I2C0_SCL */ + + /* I2C1 - NFC with external pulls */ + PAD_CFG_NF(GPIO_126, NONE, DEEP, NF1) /* LPSS_I2C1_SDA */ + PAD_CFG_NF(GPIO_127, NONE, DEEP, NF1) /* LPSS_I2C1_SCL */ + + /* I2C2 - TPM */ + PAD_CFG_NF(GPIO_128, UP_2K, DEEP, NF1) /* LPSS_I2C2_SDA */ + PAD_CFG_NF(GPIO_129, UP_2K, DEEP, NF1) /* LPSS_I2C2_SCL */ + + /* I2C3 - touch */ + PAD_CFG_NF(GPIO_130, UP_2K, DEEP, NF1) /* LPSS_I2C3_SDA */ + PAD_CFG_NF(GPIO_131, UP_2K, DEEP, NF1) /* LPSS_I2C3_SCL */ + + /* I2C4 - trackpad */ + /* LPSS_I2C4_SDA */ + PAD_CFG_NF_IOSSTATE(GPIO_132, UP_2K, DEEP, NF1, HIZCRX1) + /* LPSS_I2C4_SCL */ + PAD_CFG_NF_IOSSTATE(GPIO_133, UP_2K, DEEP, NF1, HIZCRX1) + + /* I2C5 -- pen with external pulls */ + PAD_CFG_NF(GPIO_134, NONE, DEEP, NF1) /* LPSS_I2C5_SDA */ + PAD_CFG_NF(GPIO_135, NONE, DEEP, NF1) /* LPSS_I2C5_SCL */ + + /* I2C6-7 -- unused */ + PAD_CFG_GPI(GPIO_136, UP_20K, DEEP) /* LPSS_I2C6_SDA */ + PAD_CFG_GPI(GPIO_137, UP_20K, DEEP) /* LPSS_I2C6_SCL */ + PAD_CFG_GPI(GPIO_138, UP_20K, DEEP) /* LPSS_I2C7_SDA */ + PAD_CFG_GPI(GPIO_139, UP_20K, DEEP) /* LPSS_I2C7_SCL */ + + /* Audio Amp - I2S6 */ + PAD_CFG_NF(GPIO_146, NATIVE, DEEP, NF2) /* ISH_GPIO_0 - I2S6_BCLK */ + PAD_CFG_NF(GPIO_147, NATIVE, DEEP, NF2) /* ISH_GPIO_1 - I2S6_WS_SYNC */ + PAD_CFG_GPI(GPIO_148, UP_20K, DEEP) /* ISH_GPIO_2 - unused */ + PAD_CFG_NF(GPIO_149, NATIVE, DEEP, NF2) /* ISH_GPIO_3 - I2S6_SDO */ + + /* NFC Reset */ + PAD_CFG_GPO(GPIO_150, 1, DEEP) /* ISH_GPIO_4 */ + + PAD_CFG_GPI(GPIO_151, UP_20K, DEEP) /* ISH_GPIO_5 - unused */ + + /* Touch enable */ + PAD_CFG_GPO(GPIO_152, 1, DEEP) /* ISH_GPIO_6 */ + + PAD_CFG_GPI(GPIO_153, UP_20K, DEEP) /* ISH_GPIO_7 - unused */ + PAD_CFG_GPI(GPIO_154, UP_20K, DEEP) /* ISH_GPIO_8 - unused */ + PAD_CFG_GPI(GPIO_155, UP_20K, DEEP) /* ISH_GPIO_9 - unused */ + + /* PCIE_CLKREQ[0:3]_N */ + PAD_CFG_NF(GPIO_209, NONE, DEEP, NF1) /* WLAN with external pull */ + PAD_CFG_GPI(GPIO_210, UP_20K, DEEP) /* unused */ + PAD_CFG_GPI(GPIO_211, UP_20K, DEEP) /* unused */ + PAD_CFG_GPI(GPIO_212, UP_20K, DEEP) /* unused */ + + /* OSC_CLK_OUT_[0:4] -- unused */ + PAD_CFG_GPI(OSC_CLK_OUT_0, UP_20K, DEEP) + PAD_CFG_GPI(OSC_CLK_OUT_1, UP_20K, DEEP) + PAD_CFG_GPI(OSC_CLK_OUT_2, UP_20K, DEEP) + PAD_CFG_GPI(OSC_CLK_OUT_3, UP_20K, DEEP) + PAD_CFG_GPI(OSC_CLK_OUT_4, UP_20K, DEEP) + + /* PMU Signals */ + PAD_CFG_GPI(PMU_AC_PRESENT, UP_20K, DEEP) /* PMU_AC_PRESENT - unused */ + PAD_CFG_NF(PMU_BATLOW_B, UP_20K, DEEP, NF1) /* PMU_BATLOW_N */ + PAD_CFG_NF(PMU_PLTRST_B, NONE, DEEP, NF1) /* PMU_PLTRST_N */ + PAD_CFG_NF(PMU_PWRBTN_B, UP_20K, DEEP, NF1) /* PMU_PWRBTN_N */ + PAD_CFG_NF(PMU_RESETBUTTON_B, NONE, DEEP, NF1) /* PMU_RSTBTN_N */ + PAD_CFG_NF_IOSSTATE(PMU_SLP_S0_B, NONE, DEEP, NF1, IGNORE) /* PMU_SLP_S0_N */ + PAD_CFG_NF(PMU_SLP_S3_B, NONE, DEEP, NF1) /* PMU_SLP_S3_N */ + PAD_CFG_NF(PMU_SLP_S4_B, NONE, DEEP, NF1) /* PMU_SLP_S4_N */ + PAD_CFG_NF(PMU_SUSCLK, NONE, DEEP, NF1) /* PMU_SUSCLK */ + PAD_CFG_GPO(PMU_WAKE_B, 1, DEEP) /* EN_PP3300_EMMC */ + PAD_CFG_NF(SUS_STAT_B, NONE, DEEP, NF1) /* SUS_STAT_N */ + PAD_CFG_NF(SUSPWRDNACK, NONE, DEEP, NF1) /* SUSPWRDNACK */ + + /* DDI[0:1] SDA and SCL -- unused */ + PAD_CFG_GPI(GPIO_187, UP_20K, DEEP) /* HV_DDI0_DDC_SDA */ + PAD_CFG_GPI(GPIO_188, UP_20K, DEEP) /* HV_DDI0_DDC_SCL */ + PAD_CFG_GPI(GPIO_189, UP_20K, DEEP) /* HV_DDI1_DDC_SDA */ + PAD_CFG_GPI(GPIO_190, UP_20K, DEEP) /* HV_DDI1_DDC_SCL */ + + /* MIPI I2C -- unused */ + PAD_CFG_GPI(GPIO_191, UP_20K, DEEP) /* MIPI_I2C_SDA */ + PAD_CFG_GPI(GPIO_192, UP_20K, DEEP) /* MIPI_I2C_SCL */ + + /* Panel 0 control */ + PAD_CFG_NF(GPIO_193, NATIVE, DEEP, NF1) /* PNL0_VDDEN */ + PAD_CFG_NF(GPIO_194, NATIVE, DEEP, NF1) /* PNL0_BKLTEN */ + PAD_CFG_NF(GPIO_195, NATIVE, DEEP, NF1) /* PNL0_BKLTCTL */ + + /* Panel 1 control -- unused */ + PAD_CFG_NF(GPIO_196, NATIVE, DEEP, NF1) /* PNL1_VDDEN */ + PAD_CFG_NF(GPIO_197, NATIVE, DEEP, NF1) /* PNL1_BKLTEN */ + PAD_CFG_NF(GPIO_198, NATIVE, DEEP, NF1) /* PNL1_BKLTCTL */ + + /* Hot plug detect */ + PAD_CFG_NF(GPIO_199, UP_20K, DEEP, NF2) /* HV_DDI1_HPD */ + PAD_CFG_NF(GPIO_200, UP_20K, DEEP, NF2) /* HV_DDI0_HPD */ + + /* MDSI signals -- unused */ + PAD_CFG_GPI(GPIO_201, UP_20K, DEEP) /* MDSI_A_TE */ + PAD_CFG_GPI(GPIO_202, UP_20K, DEEP) /* MDSI_A_TE */ + + /* USB overcurrent pins */ + PAD_CFG_NF(GPIO_203, UP_20K, DEEP, NF1) /* USB_OC0_N */ + PAD_CFG_NF(GPIO_204, UP_20K, DEEP, NF1) /* USB_OC1_N */ + + /* PMC SPI -- almost entirely unused */ + PAD_CFG_GPI(PMC_SPI_FS0, UP_20K, DEEP) + PAD_CFG_NF(PMC_SPI_FS1, UP_20K, DEEP, NF2) /* HV_DDI2_HPD -- EDP HPD */ + PAD_CFG_GPI(PMC_SPI_FS2, UP_20K, DEEP) + PAD_CFG_GPI(PMC_SPI_RXD, UP_20K, DEEP) + PAD_CFG_GPI(PMC_SPI_TXD, UP_20K, DEEP) + PAD_CFG_GPI(PMC_SPI_CLK, UP_20K, DEEP) + + /* PMIC Signals Unused signals related to an old PMIC interface */ + PAD_CFG_NF_IOSSTATE(PMIC_RESET_B, NATIVE, DEEP, NF1, IGNORE) /* PMIC_RESET_B */ + PAD_CFG_GPI(GPIO_213, NONE, DEEP) /* unused external pull */ + PAD_CFG_GPI(GPIO_214, UP_20K, DEEP) /* unused */ + PAD_CFG_GPI(GPIO_215, UP_20K, DEEP) /* unused */ + PAD_CFG_NF(PMIC_THERMTRIP_B, UP_20K, DEEP, NF1) /* THERMTRIP_N */ + PAD_CFG_GPI(PMIC_STDBY, UP_20K, DEEP) /* unused */ + PAD_CFG_NF(PROCHOT_B, UP_20K, DEEP, NF1) /* PROCHOT_N */ + PAD_CFG_NF(PMIC_I2C_SCL, UP_1K, DEEP, NF1) /* PMIC_I2C_SCL */ + PAD_CFG_NF(PMIC_I2C_SDA, UP_1K, DEEP, NF1) /* PMIC_I2C_SDA */ + + /* I2S1 -- largely unused */ + PAD_CFG_GPI(GPIO_74, UP_20K, DEEP) /* I2S1_MCLK */ + PAD_CFG_GPI(GPIO_75, UP_20K, DEEP) /* I2S1_BCLK -- PCH_WP */ + PAD_CFG_GPO(GPIO_76, 0, DEEP) /* I2S1_WS_SYNC -- SPK_PA_EN */ + PAD_CFG_GPI(GPIO_77, UP_20K, DEEP) /* I2S1_SDI */ + PAD_CFG_GPO(GPIO_78, 1, DEEP) /* I2S1_SDO -- EN_PP3300_DX_LTE_SOC */ + + /* DMIC or I2S4 */ + /* AVS_DMIC_CLK_A1 */ + PAD_CFG_NF_IOSSTATE(GPIO_79, NATIVE, DEEP, NF1, IGNORE) + PAD_CFG_NF(GPIO_80, NATIVE, DEEP, NF1) /* AVS_DMIC_CLK_B1 */ + PAD_CFG_NF(GPIO_81, NATIVE, DEEP, NF1) /* AVS_DMIC_DATA_1 */ + PAD_CFG_GPI(GPIO_82, DN_20K, DEEP) /* unused -- strap */ + PAD_CFG_NF(GPIO_83, NATIVE, DEEP, NF1) /* AVS_DMIC_DATA_2 */ + + /* I2S2 -- Headset amp */ + PAD_CFG_NF(GPIO_84, NATIVE, DEEP, NF1) /* AVS_I2S2_MCLK */ + PAD_CFG_NF(GPIO_85, NATIVE, DEEP, NF1) /* AVS_I2S2_BCLK */ + PAD_CFG_NF(GPIO_86, NATIVE, DEEP, NF1) /* AVS_I2S2_SW_SYNC */ + PAD_CFG_NF(GPIO_87, NATIVE, DEEP, NF1) /* AVS_I2S2_SDI */ + PAD_CFG_NF(GPIO_88, NATIVE, DEEP, NF1) /* AVS_I2S2_SDO */ + + /* I2S3 -- largely unused */ + PAD_CFG_GPI(GPIO_89, UP_20K, DEEP) /* unused */ + PAD_CFG_GPI(GPIO_90, UP_20K, DEEP) /* GPS_HOST_WAKE */ + PAD_CFG_GPO(GPIO_91, 1, DEEP) /* GPS_EN */ + PAD_CFG_GPI(GPIO_92, DN_20K, DEEP) /* unused -- strap */ + + /* Fast SPI */ + PAD_CFG_NF_IOSSTATE(GPIO_97, NATIVE, DEEP, NF1, IGNORE) /* FST_SPI_CS0_B */ + PAD_CFG_GPI(GPIO_98, UP_20K, DEEP) /* FST_SPI_CS1_B -- unused */ + PAD_CFG_NF_IOSSTATE(GPIO_99, NATIVE, DEEP, NF1, IGNORE) /* FST_SPI_MOSI_IO0 */ + PAD_CFG_NF_IOSSTATE(GPIO_100, NATIVE, DEEP, NF1, IGNORE) /* FST_SPI_MISO_IO1 */ + PAD_CFG_GPI(GPIO_101, NONE, DEEP) /* FST_IO2 -- MEM_CONFIG0 */ + PAD_CFG_GPI(GPIO_102, NONE, DEEP) /* FST_IO3 -- MEM_CONFIG1 */ + PAD_CFG_NF_IOSSTATE(GPIO_103, NATIVE, DEEP, NF1, IGNORE) /* FST_SPI_CLK */ + PAD_CFG_NF_IOSSTATE(FST_SPI_CLK_FB, NATIVE, DEEP, NF1, IGNORE) /* FST_SPI_CLK_FB */ + PAD_CFG_NF_IOSSTATE(GPIO_106, NATIVE, DEEP, NF3, IGNORE) /* FST_SPI_CS2_N */ + + /* SIO_SPI_0 - Used for FP */ + PAD_CFG_NF(GPIO_104, NATIVE, DEEP, NF1) /* SIO_SPI_0_CLK */ + PAD_CFG_NF(GPIO_105, NATIVE, DEEP, NF1) /* SIO_SPI_0_FS0 */ + PAD_CFG_NF(GPIO_109, NATIVE, DEEP, NF1) /* SIO_SPI_0_RXD */ + PAD_CFG_NF(GPIO_110, NATIVE, DEEP, NF1) /* SIO_SPI_0_TXD */ + + /* SIO_SPI_1 -- largely unused */ + PAD_CFG_GPI(GPIO_111, UP_20K, DEEP) /* SIO_SPI_1_CLK */ + PAD_CFG_GPI(GPIO_112, UP_20K, DEEP) /* SIO_SPI_1_FS0 */ + PAD_CFG_GPI(GPIO_113, UP_20K, DEEP) /* SIO_SPI_1_FS1 */ + /* Headset interrupt */ + PAD_CFG_GPI_APIC_LOW(GPIO_116, NONE, DEEP) /* SIO_SPI_1_RXD */ + PAD_CFG_GPI(GPIO_117, UP_20K, DEEP) /* SIO_SPI_1_TXD */ + + /* SIO_SPI_2 -- unused */ + PAD_CFG_GPI(GPIO_118, UP_20K, DEEP) /* SIO_SPI_2_CLK */ + PAD_CFG_GPI(GPIO_119, UP_20K, DEEP) /* SIO_SPI_2_FS0 */ + PAD_CFG_GPI(GPIO_120, UP_20K, DEEP) /* SIO_SPI_2_FS1 */ + PAD_CFG_GPI(GPIO_121, UP_20K, DEEP) /* SIO_SPI_2_FS2 */ + /* WLAN_PE_RST - default to deasserted */ + PAD_CFG_GPO(GPIO_122, 0, DEEP) /* SIO_SPI_2_RXD */ + PAD_CFG_GPI(GPIO_123, UP_20K, DEEP) /* SIO_SPI_2_TXD */ + + /* Debug tracing */ + PAD_CFG_GPI(GPIO_0, UP_20K, DEEP) + PAD_CFG_GPI(GPIO_1, UP_20K, DEEP) + PAD_CFG_GPI(GPIO_2, UP_20K, DEEP) + PAD_CFG_GPI_SCI_HIGH(GPIO_3, DN_20K, DEEP, LEVEL) /* FP_INT */ + PAD_CFG_GPI(GPIO_4, UP_20K, DEEP) + PAD_CFG_GPI(GPIO_5, UP_20K, DEEP) + PAD_CFG_GPI(GPIO_6, UP_20K, DEEP) + PAD_CFG_GPI(GPIO_7, UP_20K, DEEP) + PAD_CFG_GPI(GPIO_8, UP_20K, DEEP) + + PAD_CFG_GPI_APIC_LOW(GPIO_9, NONE, DEEP) /* dTPM IRQ */ + PAD_CFG_GPI(GPIO_10, DN_20K, DEEP) /* Board phase enforcement */ + PAD_CFG_GPI_SCI_LOW(GPIO_11, NONE, DEEP, EDGE_SINGLE) /* EC SCI */ + PAD_CFG_GPI(GPIO_12, UP_20K, DEEP) /* unused */ + PAD_CFG_GPI_APIC_LOW(GPIO_13, NONE, DEEP) /* PEN_INT_ODL */ + PAD_CFG_GPI_APIC_HIGH(GPIO_14, DN_20K, DEEP) /* FP_INT */ + PAD_CFG_GPI_SCI_LOW(GPIO_15, NONE, DEEP, EDGE_SINGLE) /* TRACKPAD_INT_1V8_ODL */ + PAD_CFG_GPI(GPIO_16, UP_20K, DEEP) /* unused */ + PAD_CFG_GPI(GPIO_17, UP_20K, DEEP) /* 1 vs 4 DMIC config */ + PAD_CFG_GPI_APIC_LOW(GPIO_18, NONE, DEEP) /* Trackpad IRQ */ + PAD_CFG_GPI(GPIO_19, UP_20K, DEEP) /* unused */ + PAD_CFG_GPI_APIC_LOW(GPIO_20, UP_20K, DEEP) /* NFC IRQ */ + PAD_CFG_GPI_APIC_LOW(GPIO_21, NONE, DEEP) /* Touch IRQ */ + PAD_CFG_GPI_SCI_LOW(GPIO_22, NONE, DEEP, EDGE_SINGLE) /* EC wake */ + PAD_CFG_GPI(GPIO_23, UP_20K, DEEP) /* unused */ + PAD_CFG_GPI(GPIO_24, NONE, DEEP) /* PEN_PDCT_ODL */ + PAD_CFG_GPI(GPIO_25, UP_20K, DEEP) /* unused */ + PAD_CFG_GPI(GPIO_26, UP_20K, DEEP) /* unused */ + PAD_CFG_GPI(GPIO_27, UP_20K, DEEP) /* unused */ + PAD_CFG_GPI_APIC_LOW(GPIO_28, NONE, DEEP) /* TPM IRQ */ + PAD_CFG_GPO(GPIO_29, 1, DEEP) /* FP reset */ + PAD_CFG_GPI_APIC_LOW(GPIO_30, NONE, DEEP) /* KB IRQ */ + PAD_CFG_GPO(GPIO_31, 0, DEEP) /* NFC FW DL */ + PAD_CFG_NF(GPIO_32, NONE, DEEP, NF5) /* SUS_CLK2 */ + PAD_CFG_GPI_APIC_LOW(GPIO_33, NONE, DEEP) /* PMIC IRQ */ + PAD_CFG_GPI(GPIO_34, UP_20K, DEEP) /* unused */ + PAD_CFG_GPO(GPIO_35, 0, DEEP) /* PEN_RESET - active high */ + PAD_CFG_GPO(GPIO_36, 0, DEEP) /* touch reset */ + PAD_CFG_GPI(GPIO_37, UP_20K, DEEP) /* unused */ + + /* LPSS_UART[0:2] */ + PAD_CFG_GPI(GPIO_38, NONE, DEEP) /* LPSS_UART0_RXD - MEM_CONFIG2*/ + /* Next 2 are straps */ + PAD_CFG_GPI(GPIO_39, DN_20K, DEEP) /* LPSS_UART0_TXD - unused */ + PAD_CFG_GPI(GPIO_40, DN_20K, DEEP) /* LPSS_UART0_RTS - unused */ + PAD_CFG_GPI(GPIO_41, NONE, DEEP) /* LPSS_UART0_CTS - EC_IN_RW */ + PAD_CFG_NF(GPIO_42, NATIVE, DEEP, NF1) /* LPSS_UART1_RXD */ + PAD_CFG_NF(GPIO_43, NATIVE, DEEP, NF1) /* LPSS_UART1_TXD */ + PAD_CFG_GPO(GPIO_44, 1, DEEP) /* GPS_RST_ODL */ + PAD_CFG_GPI(GPIO_45, NONE, DEEP) /* LPSS_UART1_CTS - MEM_CONFIG3 */ + PAD_CFG_NF(GPIO_46, NATIVE, DEEP, NF1) /* LPSS_UART2_RXD */ + PAD_CFG_NF_IOSSTATE(GPIO_47, NATIVE, DEEP, NF1, TX1_RX_DCR_X0) /* UART2 TX */ + PAD_CFG_GPI(GPIO_48, UP_20K, DEEP) /* LPSS_UART2_RTS - unused */ + PAD_CFG_GPI_SMI_LOW(GPIO_49, NONE, DEEP, EDGE_SINGLE) /* LPSS_UART2_CTS - EC_SMI_L */ + + /* Camera interface -- completely unused */ + PAD_CFG_GPI(GPIO_62, UP_20K, DEEP) /* GP_CAMERASB00 */ + PAD_CFG_GPI(GPIO_63, UP_20K, DEEP) /* GP_CAMERASB01 */ + PAD_CFG_GPI(GPIO_64, UP_20K, DEEP) /* GP_CAMERASB02 */ + PAD_CFG_GPI(GPIO_65, UP_20K, DEEP) /* GP_CAMERASB03 */ + PAD_CFG_GPI(GPIO_66, UP_20K, DEEP) /* GP_CAMERASB04 */ + PAD_CFG_GPI(GPIO_67, UP_20K, DEEP) /* GP_CAMERASB05 */ + PAD_CFG_GPI(GPIO_68, UP_20K, DEEP) /* GP_CAMERASB06 */ + PAD_CFG_GPI(GPIO_69, UP_20K, DEEP) /* GP_CAMERASB07 */ + PAD_CFG_GPI(GPIO_70, UP_20K, DEEP) /* GP_CAMERASB08 */ + PAD_CFG_GPI(GPIO_71, UP_20K, DEEP) /* GP_CAMERASB09 */ + PAD_CFG_GPI(GPIO_72, UP_20K, DEEP) /* GP_CAMERASB10 */ + PAD_CFG_GPI(GPIO_73, UP_20K, DEEP) /* GP_CAMERASB11 */ + >; +}; diff --git a/board/google/Kconfig b/board/google/Kconfig index 679a0f1023..0593833fd2 100644 --- a/board/google/Kconfig +++ b/board/google/Kconfig @@ -60,8 +60,23 @@ config TARGET_CHROMEBOOK_SAMUS_TPL between different A/B versions of SPL/U-Boot, to allow upgrading of almost all U-Boot code in the field.
+config TARGET_CHROMEBOOK_CORAL + bool "Chromebook coral" + help + This is a range of Intel-based laptops released in 2018. They use an + Intel Apollo Lake SoC. The design supports WiFi, 4GB to 16GB of + LPDDR4 1600MHz SDRAM, PCIe WiFi and Bluetooth, eMMC (typically 32GB), + up two cameras (front-facing 720p and another 5MP option), USB SD + reader, microphone and speakers. It also includes two USB 3 Type A and + two Type C ports. The latter are used as power input and can also + charge external devices as well as a 4K external display. There is a + Chrome OS EC connected on LPC, a Cr50 secure chip from Google and + various display options. OEMs products include Acer Chromebook 11 + (e.g. C732, CB11, CP311) and Lenovo Chromebook (100e, 300e, 500e). + endchoice
+source "board/google/chromebook_coral/Kconfig" source "board/google/chromebook_link/Kconfig" source "board/google/chromebox_panther/Kconfig" source "board/google/chromebook_samus/Kconfig" diff --git a/board/google/chromebook_coral/Kconfig b/board/google/chromebook_coral/Kconfig new file mode 100644 index 0000000000..940bee89b0 --- /dev/null +++ b/board/google/chromebook_coral/Kconfig @@ -0,0 +1,43 @@ +if TARGET_CHROMEBOOK_CORAL + +config SYS_BOARD + default "chromebook_coral" + +config SYS_VENDOR + default "google" + +config SYS_SOC + default "apollolake" + +config SYS_CONFIG_NAME + default "chromebook_coral" + +config SYS_TEXT_BASE + default 0xffe00000 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select X86_RESET_VECTOR + select INTEL_APOLLOLAKE + select BOARD_ROMSIZE_KB_16384 + +config PCIE_ECAM_BASE + default 0xf0000000 + +config EARLY_POST_CROS_EC + bool "Enable early post to Chrome OS EC" + help + Allow post codes to be sent to the Chroem OS EC early during boot, + to enable monitoring of the boot and debugging when things go wrong. + With this option enabled, the EC console can be used to watch post + codes the first part of boot. + +config SYS_CAR_ADDR + hex + default 0xfef00000 + +config SYS_CAR_SIZE + hex + default 0xc0000 + +endif diff --git a/board/google/chromebook_coral/MAINTAINERS b/board/google/chromebook_coral/MAINTAINERS new file mode 100644 index 0000000000..904227e2e2 --- /dev/null +++ b/board/google/chromebook_coral/MAINTAINERS @@ -0,0 +1,6 @@ +CHROMEBOOK_CORAL_BOARD +M: Simon Glass sjg@chromium.org +S: Maintained +F: board/google/chromebook_coral/ +F: include/configs/chromebook_coral.h +F: configs/chromebook_coral_defconfig diff --git a/board/google/chromebook_coral/Makefile b/board/google/chromebook_coral/Makefile new file mode 100644 index 0000000000..6a27ce3da1 --- /dev/null +++ b/board/google/chromebook_coral/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright 2019 Google LLC + +obj-y += coral.o diff --git a/board/google/chromebook_coral/coral.c b/board/google/chromebook_coral/coral.c new file mode 100644 index 0000000000..dfe0fa484a --- /dev/null +++ b/board/google/chromebook_coral/coral.c @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 Google LLC + */ + +#include <common.h> + +int arch_misc_init(void) +{ + return 0; +} + +int board_run_command(const char *cmdline) +{ + printf("No command line\n"); + + return 0; +} diff --git a/configs/chromebook_coral_defconfig b/configs/chromebook_coral_defconfig new file mode 100644 index 0000000000..566d47d22f --- /dev/null +++ b/configs/chromebook_coral_defconfig @@ -0,0 +1,102 @@ +CONFIG_X86=y +CONFIG_SYS_TEXT_BASE=0x1110000 +CONFIG_SYS_MALLOC_F_LEN=0x3d00 +CONFIG_SPL_SYS_MALLOC_F_LEN=0xf000 +CONFIG_NR_DRAM_BANKS=8 +CONFIG_BOOTSTAGE_STASH_ADDR=0xfef00000 +CONFIG_DEBUG_UART_BOARD_INIT=y +CONFIG_DEBUG_UART_BASE=0xde000000 +CONFIG_DEBUG_UART_CLOCK=1843200 +CONFIG_VENDOR_GOOGLE=y +CONFIG_TARGET_CHROMEBOOK_CORAL=y +CONFIG_DEBUG_UART=y +CONFIG_FSP_VERSION2=y +CONFIG_HAVE_ACPI_RESUME=y +CONFIG_INTEL_CAR_CQOS=y +CONFIG_X86_OFFSET_U_BOOT=0xffe00000 +CONFIG_X86_OFFSET_SPL=0xffe80000 +CONFIG_SPL_TEXT_BASE=0xfef10000 +CONFIG_BOOTSTAGE=y +CONFIG_SPL_BOOTSTAGE=y +CONFIG_TPL_BOOTSTAGE=y +CONFIG_BOOTSTAGE_REPORT=y +CONFIG_SPL_BOOTSTAGE_RECORD_COUNT=10 +CONFIG_BOOTSTAGE_STASH=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro earlyprintk console=tty0 console=ttyS0,115200" +CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_SPL_LOG=y +CONFIG_LOG_DEFAULT_LEVEL=7 +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_LAST_STAGE_INIT=y +CONFIG_BLOBLIST=y +# CONFIG_TPL_BLOBLIST is not set +CONFIG_BLOBLIST_ADDR=0x100000 +CONFIG_HANDOFF=y +CONFIG_TPL_SYS_MALLOC_SIMPLE=y +CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SPL_CPU_SUPPORT=y +CONFIG_SPL_PCI=y +# CONFIG_SPL_SPI_FLASH_TINY is not set +CONFIG_HUSH_PARSER=y +CONFIG_CMD_CPU=y +CONFIG_CMD_PMC=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_PART=y +CONFIG_CMD_READ=y +CONFIG_CMD_SATA=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_TIME=y +CONFIG_CMD_SOUND=y +CONFIG_CMD_BOOTSTAGE=y +CONFIG_CMD_TPM=y +CONFIG_CMD_TPM_TEST=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_MAC_PARTITION=y +# CONFIG_SPL_MAC_PARTITION is not set +# CONFIG_SPL_DOS_PARTITION is not set +CONFIG_ISO_PARTITION=y +CONFIG_EFI_PARTITION=y +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_DEFAULT_DEVICE_TREE="chromebook_coral" +# CONFIG_NET is not set +CONFIG_REGMAP=y +CONFIG_SYSCON=y +CONFIG_SPL_OF_TRANSLATE=y +CONFIG_CPU=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_DW=y +CONFIG_TPL_MISC=y +CONFIG_CROS_EC=y +CONFIG_CROS_EC_LPC=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_X86_PCH7 is not set +# CONFIG_X86_PCH9 is not set +CONFIG_PINCTRL=y +# CONFIG_SPL_PINCTRL_FULL is not set +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550=y +CONFIG_SOUND=y +CONFIG_SOUND_I8254=y +CONFIG_SOUND_RT5677=y +CONFIG_SPI=y +CONFIG_ICH_SPI=y +CONFIG_TPL_SYSRESET=y +CONFIG_TPM_TIS_LPC=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_KEYBOARD=y +CONFIG_SPL_FS_CBFS=y +# CONFIG_SPL_USE_TINY_PRINTF is not set +CONFIG_TPL_USE_TINY_PRINTF=y +CONFIG_CMD_DHRYSTONE=y +CONFIG_TPM=y +# CONFIG_EFI_LOADER is not set diff --git a/doc/board/google/chromebook_coral.rst b/doc/board/google/chromebook_coral.rst new file mode 100644 index 0000000000..515fd06d76 --- /dev/null +++ b/doc/board/google/chromebook_coral.rst @@ -0,0 +1,241 @@ +.. SPDX-License-Identifier: GPL-2.0+ +.. sectionauthor:: Simon Glass sjg@chromium.org + +Chromebook Coral +================ + +Coral is a Chromebook (or really about 20 different Chromebooks) which use the +Intel Apollo Lake platform (APL). The 'reef' Chromebooks use the same APL SoC so +should also work. Some later ones based on Glacier Lake (GLK) need various +changes in GPIOs, etc. but are very similar. + +It is hoped that this port can enable ports to embedded APL boards which are +starting to appear. + +Note that booting U-Boot on APL is already supported by coreboot and +Slim Bootloader. This documentation refers to a 'bare metal' port. + + +Boot flow - TPL +--------------- + +Apollo Lake boots via an IFWI (Integrated Firmware Image). TPL is placed in +this, in the IBBL entry. + +On boot, an on-chip microcontroller called the CSE (Converged Security Engine) +sets up some SDRAM at ffff8000 and loads the TPL image to that address. The +SRAM extends up to the top of 32-bit address space, but the last 2KB is the +start16 region, so the TPL image must be 30KB at most, and CONFIG_TPL_TEXT_BASE +must be ffff8000. Actually the start16 region is small and it could probably +move from f800 to fe00, providing another 1.5KB, but TPL is only about 19KB so +there is no need to change it at present. The size limit is enforced by +CONFIG_TPL_SIZE_LIMIT to avoid producing images that won't boot. + +TPL (running from start.S) first sets up CAR (Cache-as-RAM) which provides +larger area of RAM for use while booting. CAR is mapped at CONFIG_SYS_CAR_ADDR +(fef00000) and is 768KB in size. It then sets up the stack in the botttom 64KB +of this space (i.e. below fef10000). This means that the stack and early +malloc() region in TPL can be 64KB at most. + +TPL operates without CONFIG_TPL_PCI enabled so PCI config access must use the +x86-specific functions pci_x86_write_config(), etc. SPL creates a simple-bus +device so that PCI devices are bound by driver model. Then arch_cpu_init_tpl() +is called to early init on various devices. This includes placing PCI devices +at hard-coded addresses in the memory map. PCI auto-config is not used. + +Most of the 16KB ROM is mapped into the very top of memory, except for the +Intel descriptor (first 4KB) and the space for SRAM as above. + +TPL does not set up a bloblist since at present it does not have anything to +pass to SPL. + +Once TPL is done it loads SPL from ROM using either the memory-mapped SPI or by +using the Intel fast SPI driver. SPL is loaded into CAR, at the address given +by CONFIG_SPL_TEXT_BASE, which is normally fef10000. + +Note that booting using the SPI driver results in an TPL image that is about +26KB in size instead of 19KB. Also boot speed is worse by about 340ms. If you +really want to use the driver, enable CONFIG_APL_SPI_FLASH_BOOT and set +BOOT_FROM_FAST_SPI_FLASH to true[2]. + + +Boot flow - SPL +--------------- + +SPL (running from start_from_tpl.S) continues to use the same stack as TPL. +It calls arch_cpu_init_spl() to set up a few devices, then init_dram() loads +the FSP-M binary into CAR and runs to, to set up SDRAM. The address of the +output 'HOB' list (Hand-off-block) is stored into gd->arch.hob_list for parsing. +There is a 2GB chunk of SDRAM starting at 0 and the rest is at 4GB. + +PCI auto-config is not used in SPL either, but CONFIG_SPL_PCI is defined, so +proper PCI access is available and normal dm_pci_read_config() calls can be +used. However PCI auto-config is not used so the same static memory mapping set +up by TPL is still active. + +SPL on x86 always runs with CONFIG_SPL_SEPARATE_BSS=y and BSS is at 120000 +(see u-boot-spl.lds). This works because SPL doesn't access BSS until after +board_init_r(), as per the rules, and DRAM is available then. + +SPL sets up a bloblist and passes the SPL hand-off information to U-Boot proper. +This includes a pointer to the HOB list as well as DRAM information. See +struct arch_spl_handoff. The bloblist address is set by CONFIG_BLOBLIST_ADDR, +normally 100000. + +SPL uses SPI flash to update the MRC caches in ROM. This speeds up subsequent +boots. Be warned that SPL can take 30 seconds without this cache! This is a +known issue with Intel SoCs with modern DRAM and apparently cannot be improved. +The MRC caches are used to work around this. + +Once SPL is finished it loads U-Boot into SDRAM at CONFIG_SYS_TEXT_BASE, which +is normally 1110000. Note that CAR is still active. + + +Boot flow - U-Boot pre-relocation +--------------------------------- + +U-Boot (running from start_from_spl.S) starts running in RAM and uses the same +stack as SPL. It does various init activities before relocation. Notably +arch_cpu_init_dm() sets up the pin muxing for the chip using a very large table +in the device tree. + +PCI auto-config is not used before relocation, but CONFIG_PCI of course is +defined, so proper PCI access is available. The same static memory mapping set +up by TPL is still active until relocation. + +As per usual, U-Boot allocates memory at the top of available RAM (a bit below +2GB in this case) and copies things there ready to relocate itself. Notably +reserve_arch() does not reserve space for the HOB list returned by FSP-M since +this is already located in RAM. + +U-Boot then shuts down CAR and jumps to its relocated version. + + +Boot flow - U-Boot post-relocation +--------------------------------- + +U-Boot starts up normally, running near the top of RAM. After driver model is +running, arch_fsp_init_r() is called which loads and runs the FSP-S binary. +This updates the HOB list to include graphics information, used by the fsp_video +driver. + +PCI autoconfig is done and a few devices are probed to complete init. Most +others are started only when they are used. + +Note that FSP-S is supposed to run after CAR has been shut down, which happens +immediately before U-Boot starts up in its relocated position. Therefore we +cannot run FSP-S before relocation. On the other hand we must run it before +PCI auto-config is done, since FSP-S may show or hide devices. The first device +that probes PCI after relocation is the serial port, in initr_serial(), so FSP-S +must run before that. A corollary is that loading FSP-S must be done without +using the SPI driver, to avoid probing PCI and causing an autoconfig, so +memory-mapped reading is always used for FSP-S. + +It would be possible to tear down CAR in SPL instead of U-Boot. The SPL handoff +information could make sure it does not include any pointers into CAR (in fact +it doesn't). But tearing down CAR in U-Boot allows the initial state used by TPL +and SPL to be read by U-Boot, which seems useful. It also matches how older +platforms start up (those that don't use SPL). + + +Performance +----------- + +Bootstage is used through all phases of U-Boot to keep accurate timimgs for +boot. Use 'bootstage report' in U-Boot to see the report, e.g.: + +Timer summary in microseconds (16 records): + Mark Elapsed Stage + 0 0 reset + 155,325 155,325 TPL + 204,014 48,689 end TPL + 204,385 371 SPL + 738,633 534,248 end SPL + 739,161 528 board_init_f + 842,764 103,603 board_init_r + 1,166,233 323,469 main_loop + 1,166,283 50 id=175 + +Accumulated time: + 62 fast_spi + 202 dm_r + 7,779 dm_spl + 15,555 dm_f + 208,357 fsp-m + 239,847 fsp-s + 292,143 mmap_spi + +CPU performance is about 3500 DMIPS: + +=> dhry +1000000 iterations in 161 ms: 6211180/s, 3535 DMIPS + + +Partial memory map +------------------ + +ffffffff Top of ROM (and last byte of 32-bit address space) +ffff8000 TPL loaded here (from IFWI) +ff000000 Bottom of ROM +fefc000 Top of CAR region +fef96000 Stack for FSP-M +fef40000 59000 FSP-M +fef11000 SPL loaded here +fef10000 CONFIG_BLOBLIST_ADDR +fef10000 Stack top in TPL, SPL and U-Boot before relocation +fef00000 1000 CONFIG_BOOTSTAGE_STASH_ADDR +fef00000 Base of CAR region + + f0000 CONFIG_ROM_TABLE_ADDR + 120000 BSS (defined in u-boot-spl.lds) + 200000 FSP-S (which is run after U-Boot is relocated) + 1110000 CONFIG_SYS_TEXT_BASE + + +Supported peripherals +--------------------- + +- UART +- SPI flash +- Video +- MMC (dev 0) and micro-SD (dev 1) +- Chrome OS EC +- Keyboard +- USB + + +To do +----- + +- Finish peripherals + - left-side USB + - USB-C + - Cr50 (security chip: a basic driver is running but not included here) + - I2C (driver exists but not enabled in device tree) + - Sound (Intel I2S support exists, but need da7219 driver) + - RTC (driver exists but not enabled in device tree) + - Various minor features supported by LPC, etc. +- Booting Chrome OS, e.g. with verified boot +- Integrate with Chrome OS vboot +- Improvements to booting from coreboot (i.e. as a coreboot target) +- Use FSP-T binary instead of our own CAR implementation +- Use the official FSP package instead of the coreboot one +- Enable all CPU cores +- Suspend / resume +- ACPI + + +Credits +------- + +This is a spare-time project conducted slowly over a long period of time. + +Much of the code for this port came from Coreboot, an open-source firmware +project similar to U-Boot's SPL in terms of features. + +Also see [2] for information about the boot flow used by coreboot. It is +similar, but has an extra postcar stage. U-Boot doesn't need this since it +supports relocating itself in memory. + + +[2] Intel PDF https://www.coreboot.org/images/2/23/Apollolake_SoC.pdf diff --git a/include/configs/chromebook_coral.h b/include/configs/chromebook_coral.h new file mode 100644 index 0000000000..a63c3c9eea --- /dev/null +++ b/include/configs/chromebook_coral.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2019 Google LLC + */ + +/* + * board/config.h - configuration options, board-specific + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_BOOTCOMMAND \ + "fatload mmc 1:c 1000000 syslinux/vmlinuz.A; zboot 1000000" + +#include <configs/x86-common.h> +#include <configs/x86-chromebook.h> + +#undef CONFIG_STD_DEVICES_SETTINGS +#define CONFIG_STD_DEVICES_SETTINGS "stdin=usbkbd,i8042-kbd,serial\0" \ + "stdout=vidconsole,serial\0" \ + "stderr=vidconsole,serial\0" + +#define CONFIG_ENV_SECT_SIZE 0x1000 +#define CONFIG_ENV_OFFSET 0x003f8000 + +#define CONFIG_TPL_TEXT_BASE 0xffff8000 + +#define CONFIG_SYS_NS16550_MEM32 +#undef CONFIG_SYS_NS16550_PORT_MAPPED + +#endif /* __CONFIG_H */