In xSPI mode, flashes expect 2-byte opcodes. The second byte is called the "command extension". There can be 3 types of extensions in xSPI: repeat, invert, and hex. When the extension type is "repeat", the same opcode is sent twice. When it is "invert", the second byte is the inverse of the opcode. When it is "hex" an additional opcode byte based is sent with the command whose value can be anything.
Signed-off-by: Pratyush Yadav p.yadav@ti.com --- drivers/spi/spi-mem.c | 23 +++++++++++++++++++++++ include/spi-mem.h | 24 ++++++++++++++++++++++++ 2 files changed, 47 insertions(+)
diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c index 218496d8d2..a300fe8b70 100644 --- a/drivers/spi/spi-mem.c +++ b/drivers/spi/spi-mem.c @@ -479,6 +479,29 @@ int spi_mem_adjust_op_size(struct spi_slave *slave, struct spi_mem_op *op) } EXPORT_SYMBOL_GPL(spi_mem_adjust_op_size);
+int spi_mem_get_cmd_ext(const struct spi_mem_op *op, u8 *ext) +{ + switch (op->cmd.ext_type) { + case SPI_MEM_EXT_INVERT: + *ext = ~op->cmd.opcode; + break; + + case SPI_MEM_EXT_REPEAT: + *ext = op->cmd.opcode; + break; + + case SPI_MEM_EXT_HEX: + *ext = op->cmd.ext; + break; + + default: + return -EINVAL; + } + + return 0; +} +EXPORT_SYMBOL_GPL(spi_mem_get_cmd_ext); + #ifndef __UBOOT__ static inline struct spi_mem_driver *to_spi_mem_drv(struct device_driver *drv) { diff --git a/include/spi-mem.h b/include/spi-mem.h index 1ae5f2b302..86ddf47047 100644 --- a/include/spi-mem.h +++ b/include/spi-mem.h @@ -68,11 +68,31 @@ enum spi_mem_data_dir { SPI_MEM_DATA_OUT, };
+/** + * enum spi_mem_cmd_ext - describes the command opcode extension in DTR mode + * @SPI_MEM_EXT_NONE: no extension. This is the default, and is used in Legacy + * SPI mode + * @SPI_MEM_EXT_REPEAT: the extension is same as the opcode + * @SPI_MEM_EXT_INVERT: the extension is the bitwise inverse of the opcode + * @SPI_MEM_EXT_HEX: the extension is any hex value. The command and opcode + * combine to form a 16-bit opcode. + */ +enum spi_mem_cmd_ext { + SPI_MEM_EXT_NONE = 0, + SPI_MEM_EXT_REPEAT, + SPI_MEM_EXT_INVERT, + SPI_MEM_EXT_HEX, +}; + /** * struct spi_mem_op - describes a SPI memory operation * @cmd.buswidth: number of IO lines used to transmit the command * @cmd.opcode: operation opcode * @cmd.is_dtr: whether the command opcode should be sent in DTR mode or not + * @cmd.ext_type: type of the command opcode extension in DTR mode + * @cmd.ext: value of the command opcode extension in DTR mode. It is + * only set when 'ext_type' is 'SPI_MEM_EXT_HEX'. In all other + * cases, the extension can be directly derived from the opcode. * @addr.nbytes: number of address bytes to send. Can be zero if the operation * does not need to send an address * @addr.buswidth: number of IO lines used to transmit the address cycles @@ -96,6 +116,8 @@ struct spi_mem_op { u8 buswidth; u8 opcode; bool is_dtr; + enum spi_mem_cmd_ext ext_type; + u8 ext; } cmd;
struct { @@ -249,6 +271,8 @@ bool spi_mem_supports_op(struct spi_slave *slave, const struct spi_mem_op *op);
int spi_mem_exec_op(struct spi_slave *slave, const struct spi_mem_op *op);
+int spi_mem_get_cmd_ext(const struct spi_mem_op *op, u8 *ext); + #ifndef __UBOOT__ int spi_mem_driver_register_with_owner(struct spi_mem_driver *drv, struct module *owner);