This builds and displays an SPL message, but does not function beyond that.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v4: None Changes in v3: None Changes in v2: - Tidy up license headers and remove SPL #ifdefs
arch/arm/dts/Makefile | 3 +- arch/arm/dts/cros-ec-sbs.dtsi | 16 + arch/arm/dts/rk3288-jerry.dts | 203 +++++++ arch/arm/dts/rk3288-veyron-chromebook.dtsi | 200 +++++++ arch/arm/dts/rk3288-veyron.dtsi | 844 +++++++++++++++++++++++++++++ arch/arm/mach-rockchip/rk3288/Kconfig | 10 + board/google/chromebook_jerry/Kconfig | 15 + board/google/chromebook_jerry/MAINTAINERS | 6 + board/google/chromebook_jerry/Makefile | 7 + board/google/chromebook_jerry/jerry.c | 7 + board/google/common/Makefile | 2 +- configs/chromebook_jerry_defconfig | 43 ++ include/configs/chromebook_jerry.h | 16 + 13 files changed, 1370 insertions(+), 2 deletions(-) create mode 100644 arch/arm/dts/cros-ec-sbs.dtsi create mode 100644 arch/arm/dts/rk3288-jerry.dts create mode 100644 arch/arm/dts/rk3288-veyron-chromebook.dtsi create mode 100644 arch/arm/dts/rk3288-veyron.dtsi create mode 100644 board/google/chromebook_jerry/Kconfig create mode 100644 board/google/chromebook_jerry/MAINTAINERS create mode 100644 board/google/chromebook_jerry/Makefile create mode 100644 board/google/chromebook_jerry/jerry.c create mode 100644 configs/chromebook_jerry_defconfig create mode 100644 include/configs/chromebook_jerry.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 698b195..5ade574 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -16,7 +16,8 @@ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \ exynos5800-peach-pi.dtb \ exynos5422-odroidxu3.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ - rk3288-firefly.dtb + rk3288-firefly.dtb \ + rk3288-jerry.dtb dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ diff --git a/arch/arm/dts/cros-ec-sbs.dtsi b/arch/arm/dts/cros-ec-sbs.dtsi new file mode 100644 index 0000000..3f35d20 --- /dev/null +++ b/arch/arm/dts/cros-ec-sbs.dtsi @@ -0,0 +1,16 @@ +/* + * Smart battery dts fragment for devices that use cros-ec-sbs + * + * Copyright (c) 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0 +*/ + +&i2c_tunnel { + battery: sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + sbs,i2c-retry-count = <2>; + sbs,poll-retry-count = <1>; + }; +}; diff --git a/arch/arm/dts/rk3288-jerry.dts b/arch/arm/dts/rk3288-jerry.dts new file mode 100644 index 0000000..da37ea8 --- /dev/null +++ b/arch/arm/dts/rk3288-jerry.dts @@ -0,0 +1,203 @@ +/* + * Google Veyron Jerry Rev 3+ board device tree source + * + * Copyright 2014 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0 + */ + +/dts-v1/; +#include "rk3288-veyron-chromebook.dtsi" +#include "cros-ec-sbs.dtsi" + +/ { + model = "Google Jerry"; + compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6", + "google,veyron-jerry-rev5", "google,veyron-jerry-rev4", + "google,veyron-jerry-rev3", "google,veyron-jerry", + "google,veyron", "rockchip,rk3288"; + + chosen { + stdout-path = &uart2; + }; + + panel_regulator: panel-regualtor { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_enable_h>; + regulator-name = "panel_regulator"; + vin-supply = <&vcc33_sys>; + }; + + vcc18_lcd: vcc18-lcd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&avdd_1v8_disp_en>; + regulator-name = "vcc18_lcd"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc18_wl>; + }; + + backlight_regulator: backlight-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_pwr_en>; + regulator-name = "backlight_regulator"; + vin-supply = <&vcc33_sys>; + startup-delay-us = <15000>; + }; +}; + +&gpio_keys { + power { + gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + }; +}; + +&backlight { + power-supply = <&backlight_regulator>; +}; + +&panel { + power-supply= <&panel_regulator>; +}; + +&rk808 { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; + dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>, + <&gpio7 15 GPIO_ACTIVE_HIGH>; + + regulators { + mic_vcc: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "mic_vcc"; + regulator-suspend-mem-disabled; + }; + }; +}; + +&sdmmc { + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio + &sdmmc_bus4>; + disable-wp; +}; + +&vcc_5v { + enable-active-high; + gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&drv_5v>; +}; + +&vcc50_hdmi { + enable-active-high; + gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc50_hdmi_en>; +}; + +&edp { + pinctrl-names = "default"; + pinctrl-0 = <&edp_hpd>; +}; + +&pinctrl { + backlight { + bl_pwr_en: bl_pwr_en { + rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + buck-5v { + drv_5v: drv-5v { + rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + edp { + edp_hpd: edp_hpd { + rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>; + }; + }; + + emmc { + /* Make sure eMMC is not in reset */ + emmc_deassert_reset: emmc-deassert-reset { + rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hdmi { + vcc50_hdmi_en: vcc50-hdmi-en { + rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + lcd { + lcd_enable_h: lcd-en { + rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + avdd_1v8_disp_en: avdd-1v8-disp-en { + rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + dvs_1: dvs-1 { + rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + dvs_2: dvs-2 { + rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&i2c4 { + status = "okay"; + + /* + * Trackpad pin control is shared between Elan and Synaptics devices + * so we have to pull it up to the bus level. + */ + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_xfer &trackpad_int>; + + trackpad@15 { + compatible = "elan,i2c_touchpad"; + interrupt-parent = <&gpio7>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + /* + * Remove the inherited pinctrl settings to avoid clashing + * with bus-wide ones. + */ + /delete-property/pinctrl-names; + /delete-property/pinctrl-0; + reg = <0x15>; + vcc-supply = <&vcc33_io>; + wakeup-source; + }; + + trackpad@2c { + compatible = "hid-over-i2c"; + interrupt-parent = <&gpio7>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + reg = <0x2c>; + hid-descr-addr = <0x0020>; + vcc-supply = <&vcc33_io>; + wakeup-source; + }; +}; diff --git a/arch/arm/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/dts/rk3288-veyron-chromebook.dtsi new file mode 100644 index 0000000..6d619c9 --- /dev/null +++ b/arch/arm/dts/rk3288-veyron-chromebook.dtsi @@ -0,0 +1,200 @@ +/* + * Google Veyron (and derivatives) board device tree source + * + * Copyright 2014 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <dt-bindings/clock/rockchip,rk808.h> +#include <dt-bindings/input/input.h> +#include "rk3288-veyron.dtsi" + +/ { + aliases { + i2c20 = &i2c_tunnel; + }; + + gpio_keys: gpio-keys { + pinctrl-0 = <&pwr_key_h &ap_lid_int_l>; + lid { + label = "Lid"; + gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + linux,code = <0>; /* SW_LID */ + linux,input-type = <5>; /* EV_SW */ + debounce-interval = <1>; + gpio-key,wakeup; + }; + }; + + gpio-charger { + compatible = "gpio-charger"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ac_present_ap>; + charger-type = "mains"; + }; + + /* A non-regulated voltage from power supply or battery */ + vccsys: vccsys { + compatible = "regulator-fixed"; + regulator-name = "vccsys"; + regulator-boot-on; + regulator-always-on; + }; + + vcc33_sys: vcc33-sys { + vin-supply = <&vccsys>; + }; + + vcc_5v: vcc-5v { + vin-supply = <&vccsys>; + }; + + /* This turns on vbus for host1 (dwc2) */ + vcc5_host1: vcc5-host1-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host1_pwr_en>; + regulator-name = "vcc5_host1"; + regulator-always-on; + regulator-boot-on; + }; + + /* This turns on vbus for otg for host mode (dwc2) */ + vcc5v_otg: vcc5v-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usbotg_pwren_h>; + regulator-name = "vcc5_host2"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&rk808 { + regulators { + vcc33_ccd: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33_ccd"; + regulator-suspend-mem-disabled; + }; + }; +}; + +&spi0 { + status = "okay"; + + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + spi-max-frequency = <3000000>; + interrupt-parent = <&gpio7>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ec_int>; + reg = <0>; + google,cros-ec-spi-pre-delay = <30>; + + i2c_tunnel: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c4 { + trackpad@15 { + compatible = "elan,i2c_touchpad"; + interrupt-parent = <&gpio7>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_int>; + reg = <0x15>; + vcc-supply = <&vcc33_io>; + wakeup-source; + }; +}; + +&pinctrl { + pinctrl-0 = < + /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff + &global_pwroff + + /* Wake only */ + &suspend_l_wake + &bt_dev_wake_awake + >; + pinctrl-1 = < + /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff + &global_pwroff + + /* Sleep only */ + &suspend_l_sleep + &bt_dev_wake_sleep + >; + + buttons { + ap_lid_int_l: ap-lid-int-l { + rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + charger { + ac_present_ap: ac-present-ap { + rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + cros-ec { + ec_int: ec-int { + rockchip,pins = <7 7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdmmc { + sdmmc_wp_gpio: sdmmc-wp-gpio { + rockchip,pins = <7 10 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + suspend { + suspend_l_wake: suspend-l-wake { + rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_output_low>; + }; + + suspend_l_sleep: suspend-l-sleep { + rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + trackpad { + trackpad_int: trackpad-int { + rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb-host { + host1_pwr_en: host1-pwr-en { + rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usbotg_pwren_h: usbotg-pwren-h { + rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +#include "cros-ec-keyboard.dtsi" diff --git a/arch/arm/dts/rk3288-veyron.dtsi b/arch/arm/dts/rk3288-veyron.dtsi new file mode 100644 index 0000000..7e37158 --- /dev/null +++ b/arch/arm/dts/rk3288-veyron.dtsi @@ -0,0 +1,844 @@ +/* + * Google Veyron (and derivatives) board device tree source + * + * Copyright 2014 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <dt-bindings/clock/rockchip,rk808.h> +#include <dt-bindings/input/input.h> +#include "rk3288.dtsi" + +/ { + memory { + reg = <0x0 0x80000000>; + }; + + chosen { + stdout-path = &uart2; + }; + + config { + u-boot,dm-pre-reloc; + u-boot,boot0 = &spi_flash; + }; + + firmware { + chromeos { + pinctrl-names = "default"; + pinctrl-0 = <&fw_wp_ap>; + write-protect-gpio = <&gpio7 6 GPIO_ACTIVE_LOW>; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = < + 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; + default-brightness-level = <128>; + enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + backlight-boot-off; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en>; + pwms = <&pwm0 0 1000000 0>; + }; + + panel: panel { + compatible ="cnm,n116bgeea2","simple-panel"; + status = "okay"; + power-supply = <&vcc33_lcd>; + backlight = <&backlight>; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key_h>; + power { + label = "Power"; + gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_POWER>; + debounce-interval = <100>; + gpio-key,wakeup; + }; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ap_warm_reset_h>; + priority = /bits/ 8 <200>; + }; + + sound { + compatible = "rockchip,rockchip-audio-max98090"; + rockchip,model = "ROCKCHIP-I2S"; + rockchip,i2s-controller = <&i2s>; + rockchip,audio-codec = <&max98090>; + rockchip,hp-det-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>; + rockchip,mic-det-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + rockchip,headset-codec = <&headsetcodec>; + pinctrl-names = "default"; + pinctrl-0 = <&mic_det>, <&hp_det>; + }; + + vdd_logic: pwm-regulator { + compatible = "pwm-regulator"; + pwms = <&pwm1 0 2000 0>; + + voltage-table = <1350000 0>, + <1300000 10>, + <1250000 20>, + <1200000 31>, + <1150000 41>, + <1100000 52>, + <1050000 62>, + <1000000 72>, + < 950000 83>; + + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-name = "vdd_logic"; + regulator-ramp-delay = <4000>; + }; + + vcc33_sys: vcc33-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc33_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vccsys>; + }; + + vcc_5v: vcc-5v { + compatible = "regulator-fixed"; + regulator-name = "vcc_5v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc50_hdmi: vcc50-hdmi { + compatible = "regulator-fixed"; + regulator-name = "vcc50_hdmi"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_5v>; + }; + + bt_regulator: bt-regulator { + /* + * On the module itself this is one of these (depending + * on the actual card pouplated): + * - BT_I2S_WS_BT_RFDISABLE_L + * - No connect + */ + + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_enable_l>; + regulator-name = "bt_regulator"; + }; + + wifi_regulator: wifi-regulator { + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + regulator-name = "wifi_regulator"; + + /* Faux input supply. See bt_regulator description. */ + vin-supply = <&bt_regulator>; + }; + + io-domains { + compatible = "rockchip,rk3288-io-voltage-domain"; + rockchip,grf = <&grf>; + + audio-supply = <&vcc18_codec>; + bb-supply = <&vcc33_io>; + dvp-supply = <&vcc_18>; + flash0-supply = <&vcc18_flashio>; + gpio1830-supply = <&vcc33_io>; + gpio30-supply = <&vcc33_io>; + lcdc-supply = <&vcc33_lcd>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vcc18_wl>; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + +&dmc { + logic-supply = <&vdd_logic>; + rockchip,odt-disable-freq = <333000000>; + rockchip,dll-disable-freq = <333000000>; + rockchip,sr-enable-freq = <333000000>; + rockchip,pd-enable-freq = <666000000>; + rockchip,auto-self-refresh-cnt = <0>; + rockchip,auto-power-down-cnt = <64>; + rockchip,ddr-speed-bin = <21>; + rockchip,trcd = <10>; + rockchip,trp = <10>; + operating-points = < + /* KHz uV */ + 200000 1050000 + 333000 1100000 + 533000 1150000 + 666000 1200000 + >; + rockchip,num-channels = <2>; + rockchip,pctl-timing = <0x29a 0xc8 0x1f8 0x42 0x4e 0x4 0xea 0xa + 0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7 + 0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0 + 0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0 + 0x5 0x0>; + rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200 + 0xa60 0x40 0x10 0x0>; + rockchip,sdram-channel = /bits/ 8 <0x1 0xa 0x3 0x2 0x1 0x0 0xf 0xf>; + rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>; +}; + +&efuse { + status = "okay"; +}; + +&emmc { + broken-cd; + bus-width = <8>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + disable-wp; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_deassert_reset>; + status = "okay"; +}; + +&sdio0 { + broken-cd; + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + cap-sdio-irq; + card-external-vcc-supply = <&wifi_regulator>; + clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>, <&cru SCLK_SDIO0_DRV>, + <&cru SCLK_SDIO0_SAMPLE>, <&rk808 RK808_CLKOUT1>; + clock-names = "biu", "ciu", "ciu_drv", "ciu_sample", "card_ext_clock"; + keep-power-in-suspend; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>; + status = "okay"; + vmmc-supply = <&vcc33_sys>; + vqmmc-supply = <&vcc18_wl>; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + card-detect-delay = <200>; + cd-gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; + num-slots = <1>; + status = "okay"; + vmmc-supply = <&vcc33_sd>; + vqmmc-supply = <&vccio_sd>; +}; + +&spi2 { + status = "okay"; + u-boot,dm-pre-reloc; + + spi_flash: spiflash@0 { + u-boot,dm-pre-reloc; + compatible = "spidev", "spi-flash"; + spi-max-frequency = <20000000>; /* Reduce for Dediprog em100 pro */ + reg = <0>; + }; +}; + +&i2c0 { + status = "okay"; + + clock-frequency = <400000>; + i2c-scl-falling-time-ns = <50>; /* 2.5ns measured */ + i2c-scl-rising-time-ns = <100>; /* 45ns measured */ + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + clock-output-names = "xin32k", "wifibt_32kin"; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + reg = <0x1b>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + + vcc1-supply = <&vcc33_sys>; + vcc2-supply = <&vcc33_sys>; + vcc3-supply = <&vcc33_sys>; + vcc4-supply = <&vcc33_sys>; + vcc6-supply = <&vcc_5v>; + vcc7-supply = <&vcc33_sys>; + vcc8-supply = <&vcc33_sys>; + vcc9-supply = <&vcc_5v>; + vcc10-supply = <&vcc33_sys>; + vcc11-supply = <&vcc_5v>; + vcc12-supply = <&vcc_18>; + + vddio-supply = <&vcc33_io>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vdd_arm"; + regulator-ramp-delay = <6001>; + regulator-suspend-mem-disabled; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd_gpu"; + regulator-ramp-delay = <6001>; + regulator-suspend-mem-disabled; + }; + + vcc135_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc135_ddr"; + regulator-suspend-mem-enabled; + }; + + /* + * vcc_18 has several aliases. (vcc18_flashio and + * vcc18_wl). We'll add those aliases here just to + * make it easier to follow the schematic. The signals + * are actually hooked together and only separated for + * power measurement purposes). + */ + vcc18_wl: vcc18_flashio: vcc_18: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_18"; + regulator-suspend-mem-microvolt = <1800000>; + }; + + /* + * Note that both vcc33_io and vcc33_pmuio are always + * powered together. To simplify the logic in the dts + * we just refer to vcc33_io every time something is + * powered from vcc33_pmuio. In fact, on later boards + * (such as danger) they're the same net. + */ + vcc33_io: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33_io"; + regulator-suspend-mem-microvolt = <3300000>; + }; + + vdd_10: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_10"; + regulator-suspend-mem-microvolt = <1000000>; + }; + + vccio_sd: LDO_REG4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-suspend-mem-disabled; + }; + + vcc33_sd: LDO_REG5 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33_sd"; + regulator-suspend-mem-disabled; + }; + + vcc18_codec: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_codec"; + regulator-suspend-mem-disabled; + }; + + vdd10_lcd_pwren_h: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vdd10_lcd_pwren_h"; + regulator-suspend-mem-disabled; + }; + + vcc33_lcd: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc33_lcd"; + regulator-suspend-mem-disabled; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; + + clock-frequency = <400000>; + i2c-scl-falling-time-ns = <50>; /* 2.5ns measured */ + i2c-scl-rising-time-ns = <100>; /* 40ns measured */ + + tpm: tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + powered-while-suspended; + }; +}; + +&i2c2 { + status = "okay"; + + /* 100kHz since 4.7k resistors don't rise fast enough */ + clock-frequency = <100000>; + i2c-scl-falling-time-ns = <50>; /* 10ns measured */ + i2c-scl-rising-time-ns = <800>; /* 600ns measured */ + + max98090: max98090@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <&gpio6>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&int_codec>; + }; +}; + +&i2c3 { + status = "okay"; + + clock-frequency = <400000>; + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; +}; + +&i2c4 { + status = "okay"; + + clock-frequency = <400000>; + i2c-scl-falling-time-ns = <50>; /* 11ns measured */ + i2c-scl-rising-time-ns = <300>; /* 225ns measured */ + + headsetcodec: ts3a227e@3b { + compatible = "ti,ts3a227e"; + reg = <0x3b>; + interrupt-parent = <&gpio0>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ts3a227e_int_l>; + ti,micbias = <7>; /* MICBIAS = 2.8V */ + }; +}; + +&i2c5 { + status = "okay"; + + clock-frequency = <100000>; + i2c-scl-falling-time-ns = <300>; + i2c-scl-rising-time-ns = <1000>; +}; + +&i2s { + status = "okay"; + clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out"; + clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>; +}; + +&wdt { + status = "okay"; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&uart0 { + status = "okay"; + + /* Pins don't include flow control by default; add that in */ + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + /* We need to go faster than 24MHz, so adjust clock parents / rates */ + assigned-clocks = <&cru SCLK_UART0>; + assigned-clock-rates = <48000000>; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; + u-boot,dm-pre-reloc; + reg-shift = <2>; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + +&edp { + status = "okay"; + rockchip,panel = <&panel>; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_audio { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&tsadc { + tsadc-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ + tsadc-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ + status = "okay"; +}; + +&pinctrl { + u-boot,dm-pre-reloc; + pinctrl-names = "default", "sleep"; + pinctrl-0 = < + /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff + &global_pwroff + + /* Wake only */ + &bt_dev_wake_awake + >; + pinctrl-1 = < + /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff + &global_pwroff + + /* Sleep only */ + &bt_dev_wake_sleep + >; + + /* Add this for sdmmc pins to SD card */ + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { + drive-strength = <8>; + }; + + pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + backlight { + bl_en: bl-en { + rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + buttons { + pwr_key_h: pwr-key-h { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + codec { + hp_det: hp-det { + rockchip,pins = <6 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + int_codec: int-codec { + rockchip,pins = <6 7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + mic_det: mic-det { + rockchip,pins = <6 11 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + emmc { + /* Make sure eMMC is not in reset */ + emmc_deassert_reset: emmc-deassert-reset { + rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + /* + * We run eMMC at max speed; bump up drive strength. + * We also have external pulls, so disable the internal ones. + */ + emmc_clk: emmc-clk { + rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; + }; + + emmc_bus8: emmc-bus8 { + rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, + <3 1 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, + <3 2 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, + <3 3 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, + <3 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, + <3 5 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, + <3 6 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, + <3 7 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; + }; + }; + + headset { + ts3a227e_int_l: ts3a227e-int-l { + rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + reboot { + ap_warm_reset_h: ap-warm-reset-h { + rockchip,pins = <RK_GPIO0 13 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio0 { + wifi_enable_h: wifienable-h { + rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + /* NOTE: mislabelled on schematic; should be bt_enable_h */ + bt_enable_l: bt-enable-l { + rockchip,pins = <4 29 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + /* + * We run sdio0 at max speed; bump up drive strength. + * We also have external pulls, so disable the internal ones. + */ + sdio0_bus4: sdio0-bus4 { + rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, + <4 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, + <4 22 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, + <4 23 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + }; + + sdio0_cmd: sdio0-cmd { + rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + }; + + sdio0_clk: sdio0-clk { + rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + }; + + /* + * These pins are only present on very new veyron boards; on + * older boards bt_dev_wake is simply always high. Note that + * gpio4_26 is a NC on old veyron boards, so it doesn't hurt + * to map this pin everywhere + */ + bt_dev_wake_sleep: bt-dev-wake-sleep { + rockchip,pins = <4 26 RK_FUNC_GPIO &pcfg_output_low>; + }; + + bt_dev_wake_awake: bt-dev-wake-awake { + rockchip,pins = <4 26 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + sdmmc { + /* + * We run sdmmc at max speed; bump up drive strength. + * We also have external pulls, so disable the internal ones. + */ + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, + <6 17 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, + <6 18 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, + <6 19 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + }; + + /* + * Builtin CD line is hooked to ground to prevent JTAG at boot + * (and also to get the voltage rail correct). Make we + * configure gpio6_C6 as GPIO so dw_mmc builtin CD doesn't + * think there's a card inserted + */ + sdmmc_cd_disabled: sdmmc-cd-disabled { + rockchip,pins = <6 22 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + /* This is where we actually hook up CD */ + sdmmc_cd_gpio: sdmmc-cd-gpio { + rockchip,pins = <7 5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + tpm { + tpm_int_h: tpm-int-h { + rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + write-protect { + fw_wp_ap: fw-wp-ap { + rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&usbphy { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; + needs-reset-on-resume; +}; + +&usb_host1 { + status = "okay"; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; + assigned-clocks = <&cru SCLK_USBPHY480M_SRC>; + assigned-clock-parents = <&cru SCLK_OTGPHY0>; +}; + +&sdmmc { + u-boot,dm-pre-reloc; +}; + +&gpio3 { + u-boot,dm-pre-reloc; +}; + +&gpio8 { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/mach-rockchip/rk3288/Kconfig b/arch/arm/mach-rockchip/rk3288/Kconfig index 7a77615..4d0f1b5 100644 --- a/arch/arm/mach-rockchip/rk3288/Kconfig +++ b/arch/arm/mach-rockchip/rk3288/Kconfig @@ -8,9 +8,19 @@ config TARGET_FIREFLY_RK3288 also includes on-board eMMC and 1GB of SDRAM. Expansion connectors provide access to display pins, I2C, SPI, UART and GPIOs.
+config TARGET_CHROMEBOOK_JERRY + bool "Google/Rockchip Veyron-Jerry Chromebook" + help + Jerry is a RK3288-based clamshell device with 2 USB 3.0 ports, + HDMI, an 11.9 inch EDP display, micro-SD card, touchpad and + WiFi. It includes a Chrome OS EC (Cortex-M3) to provide access to + the keyboard and battery functions. + config SYS_SOC default "rockchip"
+source "board/google/chromebook_jerry/Kconfig" + source "board/firefly/firefly-rk3288/Kconfig"
endif diff --git a/board/google/chromebook_jerry/Kconfig b/board/google/chromebook_jerry/Kconfig new file mode 100644 index 0000000..3640513 --- /dev/null +++ b/board/google/chromebook_jerry/Kconfig @@ -0,0 +1,15 @@ +if TARGET_CHROMEBOOK_JERRY + +config SYS_BOARD + default "chromebook_jerry" + +config SYS_VENDOR + default "google" + +config SYS_CONFIG_NAME + default "chromebook_jerry" + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + +endif diff --git a/board/google/chromebook_jerry/MAINTAINERS b/board/google/chromebook_jerry/MAINTAINERS new file mode 100644 index 0000000..b01b6cd --- /dev/null +++ b/board/google/chromebook_jerry/MAINTAINERS @@ -0,0 +1,6 @@ +CHROMEBOOK JERRY BOARD +M: Simon Glass sjg@chromium.org +S: Maintained +F: board/google/chromebook_jerry/ +F: include/configs/chromebook_jerry.h +F: configs/chromebook_jerry_defconfig diff --git a/board/google/chromebook_jerry/Makefile b/board/google/chromebook_jerry/Makefile new file mode 100644 index 0000000..d29a063 --- /dev/null +++ b/board/google/chromebook_jerry/Makefile @@ -0,0 +1,7 @@ +# +# (C) Copyright 2015 Google, Inc +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += jerry.o diff --git a/board/google/chromebook_jerry/jerry.c b/board/google/chromebook_jerry/jerry.c new file mode 100644 index 0000000..5119e95 --- /dev/null +++ b/board/google/chromebook_jerry/jerry.c @@ -0,0 +1,7 @@ +/* + * (C) Copyright 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> diff --git a/board/google/common/Makefile b/board/google/common/Makefile index b38bc14..2de2799 100644 --- a/board/google/common/Makefile +++ b/board/google/common/Makefile @@ -4,4 +4,4 @@ # SPDX-License-Identifier: GPL-2.0+ #
-obj-y += early_init.o +obj-$(CONFIG_X86) += early_init.o diff --git a/configs/chromebook_jerry_defconfig b/configs/chromebook_jerry_defconfig new file mode 100644 index 0000000..2d31ad6 --- /dev/null +++ b/configs/chromebook_jerry_defconfig @@ -0,0 +1,43 @@ +CONFIG_ARM=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_ROCKCHIP_RK3288=y +CONFIG_TARGET_CHROMEBOOK_JERRY=y +CONFIG_DEFAULT_DEVICE_TREE="rk3288-jerry" +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_ADDR=0x80000 +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_PMIC=y +CONFIG_CMD_REGULATOR=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y +CONFIG_RESET=y +CONFIG_LED=y +CONFIG_SPL_LED=y +CONFIG_LED_GPIO=y +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_BASE=0xff690000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_SIMPLE=y +CONFIG_SPL_PINCTRL=y +CONFIG_SPL_PINCTRL_SIMPLE=y +CONFIG_ROCKCHIP_PINCTRL=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_ACT8846=y +CONFIG_DM_REGULATOR=y +CONFIG_REGULATOR_ACT8846=y +CONFIG_RAM=y +CONFIG_SPL_RAM=y +CONFIG_DM_MMC=y +CONFIG_ROCKCHIP_MMC=y +CONFIG_USE_PRIVATE_LIBGCC=y +CONFIG_CMD_DHRYSTONE=y +CONFIG_ERRNO_STR=y diff --git a/include/configs/chromebook_jerry.h b/include/configs/chromebook_jerry.h new file mode 100644 index 0000000..a22b123 --- /dev/null +++ b/include/configs/chromebook_jerry.h @@ -0,0 +1,16 @@ +/* + * (C) Copyright 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <configs/rk3288_common.h> + +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD + +#endif