On Wed, Jul 25, 2018 at 11:07 AM, Sébastien Szymanski sebastien.szymanski@armadeus.com wrote:
Commit 9faa43c4b5e5 ("ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl") removes the u-boot,dm-spl properties from the imx6ul.dtsi file and breaks the OPOS6UL board. Add the u-boot,dm-spl properties to make the board boot again.
These should go into a imx6ul-opos6ul-u-boot.dtsi file so that when dt files are synced from the kernel things like this aren't lost (again). There's a number of examples of how that is done there.
Peter
Fixes: commit 9faa43c4b5e5 ("ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl") Signed-off-by: Sébastien Szymanski sebastien.szymanski@armadeus.com
arch/arm/dts/imx6ul-opos6ul.dtsi | 33 +++++++++++++++++++++++++++++++-- 1 file changed, 31 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/imx6ul-opos6ul.dtsi b/arch/arm/dts/imx6ul-opos6ul.dtsi index d51ad4de20..7023842315 100644 --- a/arch/arm/dts/imx6ul-opos6ul.dtsi +++ b/arch/arm/dts/imx6ul-opos6ul.dtsi @@ -99,7 +99,6 @@
/* eMMC */ &usdhc1 {
u-boot,dm-spl; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; bus-width = <8>;@@ -162,7 +161,6 @@ };
pinctrl_usdhc1: usdhc1grp {
u-boot,dm-spl; fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059@@ -192,3 +190,34 @@ >; }; };
+/* Specific to U-Boot */ +/ {
soc {u-boot,dm-spl;};+};
+&aips1 {
u-boot,dm-spl;spba-bus@02000000 {u-boot,dm-spl;};+};
+&aips2 {
u-boot,dm-spl;+};
+&iomuxc {
u-boot,dm-spl;+};
+&pinctrl_usdhc1 {
u-boot,dm-spl;+};
+&usdhc1 {
u-boot,dm-spl;+};
2.16.4
U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot