Dear u-boot-users,
i got a little question to the FEC/MII code in cpu/mpc8xx/fec.c.
As far as i understand it, MII and RMII are just two different protocols how MPC and network transceiver chip "talk"to each other. So the MPC can find out the prefered transmission method, duplex or half duplex, 100Mps or 10Mps and setup the FEC accordingly.
Now i don't get, why the speed settings of the transceiver are ignored unless *both* CONFIG_MII and CONFIG_RMII are set, and why the half/full speed settings are only of importance if CONFIG_MII alone is set.
Maybe understanding this could help me getting also 100Mps instead of 10Mps to work... thanks for your advices!
Best regards, Josef
#if defined(CONFIG_MII) && defined(CONFIG_RMII)
...
/* * adapt the RMII speed to the speed of the phy */ if (miiphy_speed (efis->actual_phy_addr) == _100BASET) { fec_100Mbps (dev); } else { fec_10Mbps (dev); } #endif
#if defined(CONFIG_MII) /* * adapt to the half/full speed settings */ if (miiphy_duplex (efis->actual_phy_addr) == FULL) { fec_full_duplex (dev); } else { fec_half_duplex (dev); } #endif