Enable EFI capsule update support. With the EFI capsule update, you can update U-Boot, TF-A and OP-TEE. TF-A and OP-TEE are usually combined as a FIP binary, but if the binary is bigger than 480KB, you have to modify FIP header, split the OP-TEE and stores the OP-TEE binary in the different place. This configuration supports both cases.
Signed-off-by: Masami Hiramatsu masami.hiramatsu@linaro.org --- configs/synquacer_developerbox_defconfig | 15 +++++++++++++++ include/configs/synquacer.h | 6 ++++++ 2 files changed, 21 insertions(+)
diff --git a/configs/synquacer_developerbox_defconfig b/configs/synquacer_developerbox_defconfig index c0d6fa49c0..a0bbbfdd0f 100644 --- a/configs/synquacer_developerbox_defconfig +++ b/configs/synquacer_developerbox_defconfig @@ -91,3 +91,18 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_PCI=y CONFIG_USB_STORAGE=y +CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y +CONFIG_EFI_CAPSULE_ON_DISK=y +CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y +CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y +CONFIG_CMD_EFIDEBUG=y +CONFIG_CMD_DFU=y +CONFIG_DFU_TFTP=y +CONFIG_DFU_MTD=y +CONFIG_DFU_RAM=y +CONFIG_DFU_SF=y +CONFIG_DFU_SF_PART=y +CONFIG_FIT=y +CONFIG_OF_LIBFDT=y +CONFIG_CMD_NVEDIT_EFI=y +CONFIG_CMD_ERASEENV=y diff --git a/include/configs/synquacer.h b/include/configs/synquacer.h index b2dd6d0f0f..5eeb16ce1c 100644 --- a/include/configs/synquacer.h +++ b/include/configs/synquacer.h @@ -58,6 +58,11 @@ /* Since U-Boot 64bit PCIe support is limited, disable 64bit MMIO support */ /* #define CONFIG_SYS_PCI_64BIT 1 */
+#define DEFAULT_DFU_ALT_INFO "dfu_alt_info='" \ + "mtd nor1=u-boot.bin raw 200000 100000;" \ + "fip.bin raw 180000 78000;" \ + "optee.bin raw 500000 100000'\0" + /* Distro boot settings */ #ifndef CONFIG_SPL_BUILD #ifdef CONFIG_CMD_USB @@ -101,6 +106,7 @@ "ramdisk_addr_r=0xa0000000\0" \ "scriptaddr=0x88000000\0" \ "pxefile_addr_r=0x88100000\0" \ + DEFAULT_DFU_ALT_INFO \ BOOTENV
#endif /* __CONFIG_H */