Reset the FLSHxCR1 registers to default value. ROM may set the register value and it affects the SPI NAND normal functions.
Signed-off-by: Han Xu han.xu@nxp.com --- drivers/spi/nxp_fspi.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/spi/nxp_fspi.c b/drivers/spi/nxp_fspi.c index 579d6bac9b..5db27f9ae2 100644 --- a/drivers/spi/nxp_fspi.c +++ b/drivers/spi/nxp_fspi.c @@ -927,6 +927,13 @@ static int nxp_fspi_default_setup(struct nxp_fspi *f) fspi_writel(f, FSPI_AHBCR_PREF_EN | FSPI_AHBCR_RDADDROPT, base + FSPI_AHBCR);
+ /* Reset the flashx control1 registers */ + reg = FSPI_FLSHXCR1_TCSH(0x3) | FSPI_FLSHXCR1_TCSS(0x3); + fspi_writel(f, reg, base + FSPI_FLSHA1CR1); + fspi_writel(f, reg, base + FSPI_FLSHA2CR1); + fspi_writel(f, reg, base + FSPI_FLSHB1CR1); + fspi_writel(f, reg, base + FSPI_FLSHB2CR1); + /* AHB Read - Set lut sequence ID for all CS. */ fspi_writel(f, SEQID_LUT, base + FSPI_FLSHA1CR2); fspi_writel(f, SEQID_LUT, base + FSPI_FLSHA2CR2);