The dm_gpio_set_value() call sets the logical level of the GPIO signal. That is, it takes the GPIO_ACTIVE_{LOW,HIGH} property into account. The driver needs to assert the reset, and then deassert it. Not the other way around.
Cc: Stefan Chulski stefanc@marvell.com Signed-off-by: Baruch Siach baruch@tkos.co.il --- drivers/net/mvpp2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/mvpp2.c b/drivers/net/mvpp2.c index 62c0c2be0626..b3b1fe1a0c41 100644 --- a/drivers/net/mvpp2.c +++ b/drivers/net/mvpp2.c @@ -4805,9 +4805,9 @@ static int phy_info_parse(struct udevice *dev, struct mvpp2_port *port) static void mvpp2_gpio_init(struct mvpp2_port *port) { if (dm_gpio_is_valid(&port->phy_reset_gpio)) { - dm_gpio_set_value(&port->phy_reset_gpio, 0); - udelay(1000); dm_gpio_set_value(&port->phy_reset_gpio, 1); + udelay(1000); + dm_gpio_set_value(&port->phy_reset_gpio, 0); }
if (dm_gpio_is_valid(&port->phy_tx_disable_gpio))