For some JH7110 boards, USB host overcurent pin is not reserved, To make USB host work, overcurrent pin must be disabled. So set the pin default disabled.
Signed-off-by: Minda Chen minda.chen@starfivetech.com
drivers/pinctrl/starfive/pinctrl-jh7110-sys.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/starfive/pinctrl-jh7110-sys.c b/drivers/pinctrl/starfive/pinctrl-jh7110-sys.c index dafba65eae..1102985ab9 100644 --- a/drivers/pinctrl/starfive/pinctrl-jh7110-sys.c +++ b/drivers/pinctrl/starfive/pinctrl-jh7110-sys.c @@ -378,8 +378,15 @@ static int jh7110_sys_pinctrl_probe(struct udevice *dev) { struct starfive_pinctrl_soc_info *info = (struct starfive_pinctrl_soc_info *)dev_get_driver_data(dev);
- return starfive_pinctrl_probe(dev, info);
- struct starfive_pinctrl_priv *priv = dev_get_priv(dev);
- int ret;
- ret = starfive_pinctrl_probe(dev, info);
- /* Set default the usb controller overcurrent signal. */
- if (!ret)
clrsetbits_le32(priv->base + JH7110_SYS_GPI,GENMASK(22, 16), BIT(16));- return ret;
}
static const struct udevice_id jh7110_sys_pinctrl_ids[] = {
2.17.1
Hi Rick and Leo I think move this to spl is better.