Changing its configuration from PHY_BASE_ADR single value to use CONFIG_PHY_ADDRS as an array with adresses.
Signed-off-by: Tor Krill tor@excito.com --- drivers/net/kirkwood_egiga.c | 3 ++- drivers/net/kirkwood_egiga.h | 8 ++++---- 2 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/net/kirkwood_egiga.c b/drivers/net/kirkwood_egiga.c index 932792e..7993e51 100644 --- a/drivers/net/kirkwood_egiga.c +++ b/drivers/net/kirkwood_egiga.c @@ -629,6 +629,7 @@ int kirkwood_egiga_initialize(bd_t * bis) int devnum; char *s; u8 used_ports[MAX_KWGBE_DEVS] = CONFIG_KIRKWOOD_EGIGA_PORTS; + u8 port_addr[MAX_KWGBE_DEVS] = PHY_ADDRS;
for (devnum = 0; devnum < MAX_KWGBE_DEVS; devnum++) { /*skip if port is configured not to use */ @@ -712,7 +713,7 @@ int kirkwood_egiga_initialize(bd_t * bis) miiphy_register(dev->name, smi_reg_read, smi_reg_write); /* Set phy address of the port */ miiphy_write(dev->name, KIRKWOOD_PHY_ADR_REQUEST, - KIRKWOOD_PHY_ADR_REQUEST, PHY_BASE_ADR + devnum); + KIRKWOOD_PHY_ADR_REQUEST, port_addr[devnum]); #endif } return 0; diff --git a/drivers/net/kirkwood_egiga.h b/drivers/net/kirkwood_egiga.h index 30c773c..6ff3bb7 100644 --- a/drivers/net/kirkwood_egiga.h +++ b/drivers/net/kirkwood_egiga.h @@ -30,11 +30,11 @@
#define MAX_KWGBE_DEVS 2 /*controller has two ports */
-/* PHY_BASE_ADR is board specific and can be configured */ -#if defined (CONFIG_PHY_BASE_ADR) -#define PHY_BASE_ADR CONFIG_PHY_BASE_ADR +/* PHY addresses is board specific and can be configured */ +#if defined (CONFIG_PHY_ADDRS) +#define PHY_ADDRS CONFIG_PHY_ADDRS #else -#define PHY_BASE_ADR 0x08 /* default phy base addr */ +#define PHY_ADDRS {0x08,0x09} /* default phy base addr */ #endif
/* Constants */