This change adds a Qualcomm GENI SE QUP device driver as a wrapper for actually enabled and used serial devices found on a board.
At the moment the driver is pretty simple, its intention is to populate childred devices and provide I/O mem read interface to them as clients, this is needed for GENI UART driver to set up a proper clock divider and provide the actually asked baud rate.
Signed-off-by: Vladimir Zapolskiy vladimir.zapolskiy@linaro.org Reviewed-by: Konrad Dybcio konrad.dybcio@linaro.org --- drivers/misc/Kconfig | 7 +++++++ drivers/misc/Makefile | 1 + drivers/misc/qcom-geni-se.c | 41 +++++++++++++++++++++++++++++++++++++ 3 files changed, 49 insertions(+) create mode 100644 drivers/misc/qcom-geni-se.c
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 4e1ae03e9fd4..04460f1acb25 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -511,6 +511,13 @@ config WINBOND_W83627 legacy UART or other devices in the Winbond Super IO chips on X86 platforms.
+config QCOM_GENI_SE + bool "Qualcomm GENI Serial Engine Driver" + depends on ARCH_SNAPDRAGON + help + The driver manages Generic Interface (GENI) firmware based + Qualcomm Technologies, Inc. Universal Peripheral (QUP) Wrapper. + config QFW bool help diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 3b792f2a14ce..52aed096021f 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -60,6 +60,7 @@ obj-$(CONFIG_NUVOTON_NCT6102D) += nuvoton_nct6102d.o obj-$(CONFIG_P2SB) += p2sb-uclass.o obj-$(CONFIG_PCA9551_LED) += pca9551_led.o obj-$(CONFIG_$(SPL_)PWRSEQ) += pwrseq-uclass.o +obj-$(CONFIG_QCOM_GENI_SE) += qcom-geni-se.o ifdef CONFIG_QFW obj-y += qfw.o obj-$(CONFIG_QFW_PIO) += qfw_pio.o diff --git a/drivers/misc/qcom-geni-se.c b/drivers/misc/qcom-geni-se.c new file mode 100644 index 000000000000..b1443ad66d26 --- /dev/null +++ b/drivers/misc/qcom-geni-se.c @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Qualcomm Generic Interface (GENI) Serial Engine (SE) Wrapper + * + * Copyright (C) 2023 Linaro Ltd. vladimir.zapolskiy@linaro.org + */ + +#include <common.h> +#include <dm.h> +#include <misc.h> +#include <asm/io.h> + +static int geni_se_qup_read(struct udevice *dev, int offset, + void *buf, int size) +{ + fdt_addr_t base = dev_read_addr(dev); + + if (size != sizeof(u32)) + return -EINVAL; + + *(u32 *)buf = readl(base + offset); + + return 0; +} + +static struct misc_ops geni_se_qup_ops = { + .read = geni_se_qup_read, +}; + +static const struct udevice_id geni_se_qup_ids[] = { + { .compatible = "qcom,geni-se-qup" }, + {} +}; + +U_BOOT_DRIVER(geni_se_qup) = { + .name = "geni_se_qup", + .id = UCLASS_MISC, + .of_match = geni_se_qup_ids, + .ops = &geni_se_qup_ops, + .flags = DM_FLAG_PRE_RELOC, +};