This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The deadline for this conversion was the v2019.07 release. The use of CONFIG_AHCI requires CONFIG_DM. The deadline for this conversion was v2020.01. Remove this board.
Cc: Akshay Bhat akshaybhat@timesys.com Cc: Ken Lin Ken.Lin@advantech.com.tw Signed-off-by: Tom Rini trini@konsulko.com --- arch/arm/mach-imx/mx6/Kconfig | 7 - board/advantech/dms-ba16/Kconfig | 31 -- board/advantech/dms-ba16/MAINTAINERS | 8 - board/advantech/dms-ba16/Makefile | 6 - board/advantech/dms-ba16/clocks.cfg | 25 - board/advantech/dms-ba16/ddr-setup.cfg | 39 -- board/advantech/dms-ba16/dms-ba16.c | 629 ----------------------- board/advantech/dms-ba16/dms-ba16_1g.cfg | 24 - board/advantech/dms-ba16/dms-ba16_2g.cfg | 24 - board/advantech/dms-ba16/micron-1g.cfg | 63 --- board/advantech/dms-ba16/samsung-2g.cfg | 63 --- configs/dms-ba16-1g_defconfig | 66 --- configs/dms-ba16_defconfig | 65 --- include/configs/advantech_dms-ba16.h | 222 -------- 14 files changed, 1272 deletions(-) delete mode 100644 board/advantech/dms-ba16/Kconfig delete mode 100644 board/advantech/dms-ba16/MAINTAINERS delete mode 100644 board/advantech/dms-ba16/Makefile delete mode 100644 board/advantech/dms-ba16/clocks.cfg delete mode 100644 board/advantech/dms-ba16/ddr-setup.cfg delete mode 100644 board/advantech/dms-ba16/dms-ba16.c delete mode 100644 board/advantech/dms-ba16/dms-ba16_1g.cfg delete mode 100644 board/advantech/dms-ba16/dms-ba16_2g.cfg delete mode 100644 board/advantech/dms-ba16/micron-1g.cfg delete mode 100644 board/advantech/dms-ba16/samsung-2g.cfg delete mode 100644 configs/dms-ba16-1g_defconfig delete mode 100644 configs/dms-ba16_defconfig delete mode 100644 include/configs/advantech_dms-ba16.h
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index dacfe623903c..ebc5e6c01d97 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -111,12 +111,6 @@ choice prompt "MX6 board select" optional
-config TARGET_ADVANTECH_DMS_BA16 - bool "Advantech dms-ba16" - depends on MX6Q - select BOARD_LATE_INIT - imply CMD_SATA - config TARGET_APALIS_IMX6 bool "Toradex Apalis iMX6 board" depends on MX6Q @@ -700,7 +694,6 @@ config SYS_SOC
source "board/ge/bx50v3/Kconfig" source "board/ge/b1x5v2/Kconfig" -source "board/advantech/dms-ba16/Kconfig" source "board/aristainetos/Kconfig" source "board/armadeus/opos6uldev/Kconfig" source "board/bachmann/ot1200/Kconfig" diff --git a/board/advantech/dms-ba16/Kconfig b/board/advantech/dms-ba16/Kconfig deleted file mode 100644 index 040eb866b53d..000000000000 --- a/board/advantech/dms-ba16/Kconfig +++ /dev/null @@ -1,31 +0,0 @@ -if TARGET_ADVANTECH_DMS_BA16 - -choice - prompt "DDR Size" - default SYS_DDR_2G - -config SYS_DDR_1G - bool "1GiB" - -config SYS_DDR_2G - bool "2GiB" - -endchoice - -config IMX_CONFIG - default "board/advantech/dms-ba16/dms-ba16_2g.cfg" if SYS_DDR_2G - default "board/advantech/dms-ba16/dms-ba16_1g.cfg" if SYS_DDR_1G - -config SYS_BOARD - default "dms-ba16" - -config SYS_VENDOR - default "advantech" - -config SYS_SOC - default "mx6" - -config SYS_CONFIG_NAME - default "advantech_dms-ba16" - -endif diff --git a/board/advantech/dms-ba16/MAINTAINERS b/board/advantech/dms-ba16/MAINTAINERS deleted file mode 100644 index e8ea3dd7b3cf..000000000000 --- a/board/advantech/dms-ba16/MAINTAINERS +++ /dev/null @@ -1,8 +0,0 @@ -ADVANTECH_DMS-BA16 BOARD -M: Akshay Bhat akshaybhat@timesys.com -M: Ken Lin Ken.Lin@advantech.com.tw -S: Maintained -F: board/advantech/dms-ba16/ -F: include/configs/advantech_dms-ba16.h -F: configs/dms-ba16_defconfig -F: configs/dms-ba16-1g_defconfig diff --git a/board/advantech/dms-ba16/Makefile b/board/advantech/dms-ba16/Makefile deleted file mode 100644 index b87fc29f065e..000000000000 --- a/board/advantech/dms-ba16/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright 2016 Timesys Corporation -# Copyright 2016 Advantech Corporation - -obj-y := dms-ba16.o diff --git a/board/advantech/dms-ba16/clocks.cfg b/board/advantech/dms-ba16/clocks.cfg deleted file mode 100644 index abc769c4e5fd..000000000000 --- a/board/advantech/dms-ba16/clocks.cfg +++ /dev/null @@ -1,25 +0,0 @@ -/* set the default clock gate to save power */ -DATA 4, CCM_CCGR0, 0x00C03F3F -DATA 4, CCM_CCGR1, 0x0030FC03 -DATA 4, CCM_CCGR2, 0x0FFFC000 -DATA 4, CCM_CCGR3, 0x3FF00000 -DATA 4, CCM_CCGR4, 0x00FFF300 -DATA 4, CCM_CCGR5, 0x0F0000C3 -DATA 4, CCM_CCGR6, 0x000003FF - -/* enable AXI cache for VDOA/VPU/IPU */ -DATA 4, MX6_IOMUXC_GPR4, 0xF00000CF -/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ -DATA 4, MX6_IOMUXC_GPR6, 0x007F007F -DATA 4, MX6_IOMUXC_GPR7, 0x007F007F - -/* - * Setup CCM_CCOSR register as follows: - * - * cko1_en 1 --> CKO1 enabled - * cko1_div 111 --> divide by 8 - * cko1_sel 1011 --> ahb_clk_root - * - * This sets CKO1 at ahb_clk_root/8 132/8 16.5 MHz - */ -DATA 4, CCM_CCOSR, 0x000000fb diff --git a/board/advantech/dms-ba16/ddr-setup.cfg b/board/advantech/dms-ba16/ddr-setup.cfg deleted file mode 100644 index 4c43e648f796..000000000000 --- a/board/advantech/dms-ba16/ddr-setup.cfg +++ /dev/null @@ -1,39 +0,0 @@ -/* DDR IO */ -DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000c0000 -DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000 -DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00000030 -DATA 4, MX6_IOM_DRAM_CAS, 0x00000030 -DATA 4, MX6_IOM_DRAM_RAS, 0x00000030 -DATA 4, MX6_IOM_GRP_ADDDS, 0x00000030 -DATA 4, MX6_IOM_DRAM_RESET, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000 -DATA 4, MX6_IOM_DRAM_SDODT0, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDODT1, 0x00000030 -DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030 -DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000 -DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000030 -DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000 -DATA 4, MX6_IOM_GRP_B0DS, 0x00000030 -DATA 4, MX6_IOM_GRP_B1DS, 0x00000030 -DATA 4, MX6_IOM_GRP_B2DS, 0x00000030 -DATA 4, MX6_IOM_GRP_B3DS, 0x00000030 -DATA 4, MX6_IOM_GRP_B4DS, 0x00000030 -DATA 4, MX6_IOM_GRP_B5DS, 0x00000030 -DATA 4, MX6_IOM_GRP_B6DS, 0x00000030 -DATA 4, MX6_IOM_GRP_B7DS, 0x00000030 -DATA 4, MX6_IOM_DRAM_DQM0, 0x00000030 -DATA 4, MX6_IOM_DRAM_DQM1, 0x00000030 -DATA 4, MX6_IOM_DRAM_DQM2, 0x00000030 -DATA 4, MX6_IOM_DRAM_DQM3, 0x00000030 -DATA 4, MX6_IOM_DRAM_DQM4, 0x00000030 -DATA 4, MX6_IOM_DRAM_DQM5, 0x00000030 -DATA 4, MX6_IOM_DRAM_DQM6, 0x00000030 -DATA 4, MX6_IOM_DRAM_DQM7, 0x00000030 diff --git a/board/advantech/dms-ba16/dms-ba16.c b/board/advantech/dms-ba16/dms-ba16.c deleted file mode 100644 index 20820fdf0762..000000000000 --- a/board/advantech/dms-ba16/dms-ba16.c +++ /dev/null @@ -1,629 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2016 Timesys Corporation - * Copyright 2016 Advantech Corporation - * Copyright 2012 Freescale Semiconductor, Inc. - */ - -#include <init.h> -#include <net.h> -#include <asm/arch/clock.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/iomux.h> -#include <asm/arch/mx6-pins.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <asm/gpio.h> -#include <asm/mach-imx/mxc_i2c.h> -#include <asm/mach-imx/iomux-v3.h> -#include <asm/mach-imx/boot_mode.h> -#include <asm/mach-imx/video.h> -#include <mmc.h> -#include <fsl_esdhc_imx.h> -#include <miiphy.h> -#include <netdev.h> -#include <asm/arch/mxc_hdmi.h> -#include <asm/arch/crm_regs.h> -#include <asm/io.h> -#include <asm/arch/sys_proto.h> -#include <i2c.h> -#include <input.h> -#include <pwm.h> -DECLARE_GLOBAL_DATA_PTR; - -#define NC_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ - PAD_CTL_HYS) - -#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ - PAD_CTL_SRE_FAST | PAD_CTL_HYS) - -#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ - PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ - PAD_CTL_SRE_FAST | PAD_CTL_HYS) - -#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \ - PAD_CTL_SPEED_HIGH | PAD_CTL_DSE_48ohm | PAD_CTL_SRE_FAST) - -#define ENET_CLK_PAD_CTRL (PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_120ohm | PAD_CTL_SRE_FAST) - -#define ENET_RX_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_SPEED_HIGH | PAD_CTL_SRE_FAST) - -#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) - -#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ - PAD_CTL_ODE | PAD_CTL_SRE_FAST) - -#define I2C_PAD MUX_PAD_CTRL(I2C_PAD_CTRL) - -int dram_init(void) -{ - gd->ram_size = imx_ddr_size(); - - return 0; -} - -static iomux_v3_cfg_t const uart3_pads[] = { - MX6_PAD_EIM_D31__UART3_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_EIM_D23__UART3_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_EIM_D24__UART3_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_EIM_D25__UART3_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), -}; - -static iomux_v3_cfg_t const uart4_pads[] = { - MX6_PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), -}; - -static iomux_v3_cfg_t const enet_pads[] = { - MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_CLK_PAD_CTRL), - MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - /* AR8033 PHY Reset */ - MX6_PAD_ENET_TX_EN__GPIO1_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -static void setup_iomux_enet(void) -{ - imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads)); - - /* Reset AR8033 PHY */ - gpio_direction_output(IMX_GPIO_NR(1, 28), 0); - mdelay(10); - gpio_set_value(IMX_GPIO_NR(1, 28), 1); - mdelay(1); -} - -static iomux_v3_cfg_t const usdhc2_pads[] = { - MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -static iomux_v3_cfg_t const usdhc3_pads[] = { - MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_RST__SD3_RESET | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), -}; - -static iomux_v3_cfg_t const usdhc4_pads[] = { - MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_NANDF_CS0__GPIO6_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL), - MX6_PAD_NANDF_CS1__GPIO6_IO14 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -static iomux_v3_cfg_t const ecspi1_pads[] = { - MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL), - MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL), - MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL), - MX6_PAD_EIM_EB2__GPIO2_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -static struct i2c_pads_info i2c_pad_info1 = { - .scl = { - .i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | I2C_PAD, - .gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 | I2C_PAD, - .gp = IMX_GPIO_NR(5, 27) - }, - .sda = { - .i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | I2C_PAD, - .gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 | I2C_PAD, - .gp = IMX_GPIO_NR(5, 26) - } -}; - -static struct i2c_pads_info i2c_pad_info2 = { - .scl = { - .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | I2C_PAD, - .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | I2C_PAD, - .gp = IMX_GPIO_NR(4, 12) - }, - .sda = { - .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | I2C_PAD, - .gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | I2C_PAD, - .gp = IMX_GPIO_NR(4, 13) - } -}; - -static struct i2c_pads_info i2c_pad_info3 = { - .scl = { - .i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | I2C_PAD, - .gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | I2C_PAD, - .gp = IMX_GPIO_NR(1, 3) - }, - .sda = { - .i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA | I2C_PAD, - .gpio_mode = MX6_PAD_GPIO_6__GPIO1_IO06 | I2C_PAD, - .gp = IMX_GPIO_NR(1, 6) - } -}; - -#ifdef CONFIG_MXC_SPI -int board_spi_cs_gpio(unsigned bus, unsigned cs) -{ - return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(2, 30)) : -1; -} - -static void setup_spi(void) -{ - imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads)); -} -#endif - -static iomux_v3_cfg_t const pcie_pads[] = { - MX6_PAD_GPIO_5__GPIO1_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL), - MX6_PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -static void setup_pcie(void) -{ - imx_iomux_v3_setup_multiple_pads(pcie_pads, ARRAY_SIZE(pcie_pads)); -} - -static void setup_iomux_uart(void) -{ - imx_iomux_v3_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads)); - imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads)); -} - -#ifdef CONFIG_FSL_ESDHC_IMX -struct fsl_esdhc_cfg usdhc_cfg[3] = { - {USDHC2_BASE_ADDR}, - {USDHC3_BASE_ADDR}, - {USDHC4_BASE_ADDR}, -}; - -#define USDHC2_CD_GPIO IMX_GPIO_NR(1, 4) -#define USDHC4_CD_GPIO IMX_GPIO_NR(6, 11) - -int board_mmc_getcd(struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - int ret = 0; - - switch (cfg->esdhc_base) { - case USDHC2_BASE_ADDR: - ret = !gpio_get_value(USDHC2_CD_GPIO); - break; - case USDHC3_BASE_ADDR: - ret = 1; /* eMMC is always present */ - break; - case USDHC4_BASE_ADDR: - ret = !gpio_get_value(USDHC4_CD_GPIO); - break; - } - - return ret; -} - -int board_mmc_init(struct bd_info *bis) -{ - int ret; - int i; - - for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { - switch (i) { - case 0: - imx_iomux_v3_setup_multiple_pads( - usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); - gpio_direction_input(USDHC2_CD_GPIO); - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); - break; - case 1: - imx_iomux_v3_setup_multiple_pads( - usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); - usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - break; - case 2: - imx_iomux_v3_setup_multiple_pads( - usdhc4_pads, ARRAY_SIZE(usdhc4_pads)); - gpio_direction_input(USDHC4_CD_GPIO); - usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); - break; - default: - printf("Warning: you configured more USDHC controllers\n" - "(%d) then supported by the board (%d)\n", - i + 1, CONFIG_SYS_FSL_USDHC_NUM); - return -EINVAL; - } - - ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); - if (ret) - return ret; - } - - return 0; -} -#endif - -static int mx6_rgmii_rework(struct phy_device *phydev) -{ - /* set device address 0x7 */ - phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7); - /* offset 0x8016: CLK_25M Clock Select */ - phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016); - /* enable register write, no post increment, address 0x7 */ - phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007); - /* set to 125 MHz from local PLL source */ - phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x18); - /* set debug port address: SerDes Test and System Mode Control */ - phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05); - /* enable rgmii tx clock delay */ - /* set the reserved bits to avoid board specific voltage peak issue*/ - phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x3D47); - - return 0; -} - -int board_phy_config(struct phy_device *phydev) -{ - mx6_rgmii_rework(phydev); - - if (phydev->drv->config) - phydev->drv->config(phydev); - - return 0; -} - -#if defined(CONFIG_VIDEO_IPUV3) -static iomux_v3_cfg_t const backlight_pads[] = { - /* Power for LVDS Display */ - MX6_PAD_EIM_D22__GPIO3_IO22 | MUX_PAD_CTRL(NO_PAD_CTRL), -#define LVDS_POWER_GP IMX_GPIO_NR(3, 22) - /* Backlight enable for LVDS display */ - MX6_PAD_GPIO_0__GPIO1_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL), -#define LVDS_BACKLIGHT_GP IMX_GPIO_NR(1, 0) - /* backlight PWM brightness control */ - MX6_PAD_SD1_DAT3__PWM1_OUT | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -static void do_enable_hdmi(struct display_info_t const *dev) -{ - imx_enable_hdmi_phy(); -} - -int board_cfb_skip(void) -{ - gpio_direction_output(LVDS_POWER_GP, 1); - - return 0; -} - -static int detect_baseboard(struct display_info_t const *dev) -{ - return 0 == dev->addr; -} - -struct display_info_t const displays[] = {{ - .bus = -1, - .addr = 0, - .pixfmt = IPU_PIX_FMT_RGB24, - .detect = detect_baseboard, - .enable = NULL, - .mode = { - .name = "SHARP-LQ156M1LG21", - .refresh = 60, - .xres = 1920, - .yres = 1080, - .pixclock = 7851, - .left_margin = 100, - .right_margin = 40, - .upper_margin = 30, - .lower_margin = 3, - .hsync_len = 10, - .vsync_len = 2, - .sync = FB_SYNC_EXT, - .vmode = FB_VMODE_NONINTERLACED -} }, { - .bus = -1, - .addr = 3, - .pixfmt = IPU_PIX_FMT_RGB24, - .detect = detect_hdmi, - .enable = do_enable_hdmi, - .mode = { - .name = "HDMI", - .refresh = 60, - .xres = 1024, - .yres = 768, - .pixclock = 15385, - .left_margin = 220, - .right_margin = 40, - .upper_margin = 21, - .lower_margin = 7, - .hsync_len = 60, - .vsync_len = 10, - .sync = FB_SYNC_EXT, - .vmode = FB_VMODE_NONINTERLACED -} } }; -size_t display_count = ARRAY_SIZE(displays); - -static void setup_display(void) -{ - struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; - struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; - - clrbits_le32(&mxc_ccm->cscmr2, MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV); - - imx_setup_hdmi(); - - /* Set LDB_DI0 as clock source for IPU_DI0 */ - clrsetbits_le32(&mxc_ccm->chsccdr, - MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK, - (CHSCCDR_CLK_SEL_LDB_DI0 << - MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET)); - - /* Turn on IPU LDB DI0 clocks */ - setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_LDB_DI0_MASK); - - enable_ipu_clock(); - - writel(IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES | - IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH | - IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW | - IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG | - IOMUXC_GPR2_DATA_WIDTH_CH1_24BIT | - IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG | - IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT | - IOMUXC_GPR2_SPLIT_MODE_EN_MASK | - IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0 | - IOMUXC_GPR2_LVDS_CH1_MODE_ENABLED_DI0, - &iomux->gpr[2]); - - clrsetbits_le32(&iomux->gpr[3], - IOMUXC_GPR3_LVDS0_MUX_CTL_MASK | - IOMUXC_GPR3_LVDS1_MUX_CTL_MASK | - IOMUXC_GPR3_HDMI_MUX_CTL_MASK, - (IOMUXC_GPR3_MUX_SRC_IPU1_DI0 << - IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET)); - - /* backlights off until needed */ - imx_iomux_v3_setup_multiple_pads(backlight_pads, - ARRAY_SIZE(backlight_pads)); - - gpio_direction_input(LVDS_POWER_GP); - gpio_direction_input(LVDS_BACKLIGHT_GP); -} -#endif /* CONFIG_VIDEO_IPUV3 */ - -/* - * Do not overwrite the console - * Use always serial for U-Boot console - */ -int overwrite_console(void) -{ - return 1; -} - -int board_eth_init(struct bd_info *bis) -{ - setup_iomux_enet(); - setup_pcie(); - - return cpu_eth_init(bis); -} - -static iomux_v3_cfg_t const misc_pads[] = { - MX6_PAD_KEY_ROW2__GPIO4_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL), - MX6_PAD_EIM_A25__GPIO5_IO02 | MUX_PAD_CTRL(NC_PAD_CTRL), - MX6_PAD_EIM_CS0__GPIO2_IO23 | MUX_PAD_CTRL(NC_PAD_CTRL), - MX6_PAD_EIM_CS1__GPIO2_IO24 | MUX_PAD_CTRL(NC_PAD_CTRL), - MX6_PAD_EIM_OE__GPIO2_IO25 | MUX_PAD_CTRL(NC_PAD_CTRL), - MX6_PAD_EIM_BCLK__GPIO6_IO31 | MUX_PAD_CTRL(NC_PAD_CTRL), - MX6_PAD_GPIO_1__GPIO1_IO01 | MUX_PAD_CTRL(NC_PAD_CTRL), -}; -#define SUS_S3_OUT IMX_GPIO_NR(4, 11) -#define WIFI_EN IMX_GPIO_NR(6, 14) - -int setup_ba16_sata(void) -{ - struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; - int ret; - - ret = enable_sata_clock(); - if (ret) - return ret; - - clrsetbits_le32(&iomuxc_regs->gpr[13], - IOMUXC_GPR13_SATA_MASK, - IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P0DB - |IOMUXC_GPR13_SATA_PHY_7_SATA2M - |IOMUXC_GPR13_SATA_SPEED_3G - |(1<<IOMUXC_GPR13_SATA_PHY_6_SHIFT) - |IOMUXC_GPR13_SATA_SATA_PHY_5_SS_DISABLED - |IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_12_16 - |IOMUXC_GPR13_SATA_PHY_3_TXBOOST_3P33_DB - |IOMUXC_GPR13_SATA_PHY_2_TX_1P133V - |IOMUXC_GPR13_SATA_PHY_1_SLOW); - - return 0; -} - -int board_early_init_f(void) -{ - imx_iomux_v3_setup_multiple_pads(misc_pads, - ARRAY_SIZE(misc_pads)); - - setup_iomux_uart(); - -#if defined(CONFIG_VIDEO_IPUV3) - /* Set LDB clock to PLL2 PFD0 */ - select_ldb_di_clock_source(MXC_PLL2_PFD0_CLK); -#endif - return 0; -} - -int board_init(void) -{ - gpio_direction_output(SUS_S3_OUT, 1); - gpio_direction_output(WIFI_EN, 1); -#if defined(CONFIG_VIDEO_IPUV3) - setup_display(); -#endif - /* address of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - -#ifdef CONFIG_MXC_SPI - setup_spi(); -#endif - setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); - setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); - setup_i2c(3, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3); - - return 0; -} - -#ifdef CONFIG_CMD_BMODE -static const struct boot_mode board_boot_modes[] = { - /* 4 bit bus width */ - {"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)}, - {"sd3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)}, - {NULL, 0}, -}; -#endif - -void pmic_init(void) -{ - -#define DA9063_ADDR 0x58 -#define BCORE2_CONF 0x9D -#define BCORE1_CONF 0x9E -#define BPRO_CONF 0x9F -#define BIO_CONF 0xA0 -#define BMEM_CONF 0xA1 -#define BPERI_CONF 0xA2 -#define MODE_BIT_H 7 -#define MODE_BIT_L 6 - - uchar val; - i2c_set_bus_num(2); - - i2c_read(DA9063_ADDR, BCORE2_CONF, 1, &val, 1); - val |= (1 << MODE_BIT_H); - val &= ~(1 << MODE_BIT_L); - i2c_write(DA9063_ADDR, BCORE2_CONF , 1, &val, 1); - - i2c_read(DA9063_ADDR, BCORE1_CONF, 1, &val, 1); - val |= (1 << MODE_BIT_H); - val &= ~(1 << MODE_BIT_L); - i2c_write(DA9063_ADDR, BCORE1_CONF , 1, &val, 1); - - i2c_read(DA9063_ADDR, BPRO_CONF, 1, &val, 1); - val |= (1 << MODE_BIT_H); - val &= ~(1 << MODE_BIT_L); - i2c_write(DA9063_ADDR, BPRO_CONF , 1, &val, 1); - - i2c_read(DA9063_ADDR, BIO_CONF, 1, &val, 1); - val |= (1 << MODE_BIT_H); - val &= ~(1 << MODE_BIT_L); - i2c_write(DA9063_ADDR, BIO_CONF , 1, &val, 1); - - i2c_read(DA9063_ADDR, BMEM_CONF, 1, &val, 1); - val |= (1 << MODE_BIT_H); - val &= ~(1 << MODE_BIT_L); - i2c_write(DA9063_ADDR, BMEM_CONF , 1, &val, 1); - - i2c_read(DA9063_ADDR, BPERI_CONF, 1, &val, 1); - val |= (1 << MODE_BIT_H); - val &= ~(1 << MODE_BIT_L); - i2c_write(DA9063_ADDR, BPERI_CONF , 1, &val, 1); - -} - -int board_late_init(void) -{ -#ifdef CONFIG_CMD_BMODE - add_board_boot_modes(board_boot_modes); -#endif - -#if defined(CONFIG_VIDEO_IPUV3) - /* - * We need at least 200ms between power on and backlight on - * as per specifications from CHI MEI - */ - mdelay(250); - - /* enable backlight PWM 1 */ - pwm_init(0, 0, 0); - - /* duty cycle 5000000ns, period: 5000000ns */ - pwm_config(0, 5000000, 5000000); - - /* Backlight Power */ - gpio_direction_output(LVDS_BACKLIGHT_GP, 1); - - pwm_enable(0); -#endif - -#ifdef CONFIG_SATA - setup_ba16_sata(); -#endif - - /* board specific pmic init */ - pmic_init(); - - return 0; -} - -int checkboard(void) -{ - printf("BOARD: %s\n", CONFIG_BOARD_NAME); - return 0; -} diff --git a/board/advantech/dms-ba16/dms-ba16_1g.cfg b/board/advantech/dms-ba16/dms-ba16_1g.cfg deleted file mode 100644 index 1c737baaf28b..000000000000 --- a/board/advantech/dms-ba16/dms-ba16_1g.cfg +++ /dev/null @@ -1,24 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * - * Copyright 2015 Timesys Corporation. - * Copyright 2015 General Electric Company - * - * Refer doc/imx/mkimage/imximage.txt for more details about how-to configure - * and create imximage boot image - * - * The syntax is taken as close as possible with the kwbimage - */ - -IMAGE_VERSION 2 -BOOT_FROM sd - -#define __ASSEMBLY__ -#include <config.h> -#include "asm/arch/mx6-ddr.h" -#include "asm/arch/iomux.h" -#include "asm/arch/crm_regs.h" - -#include "ddr-setup.cfg" -#include "micron-1g.cfg" -#include "clocks.cfg" diff --git a/board/advantech/dms-ba16/dms-ba16_2g.cfg b/board/advantech/dms-ba16/dms-ba16_2g.cfg deleted file mode 100644 index 371a84eb7e2b..000000000000 --- a/board/advantech/dms-ba16/dms-ba16_2g.cfg +++ /dev/null @@ -1,24 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * - * Copyright 2015 Timesys Corporation. - * Copyright 2015 General Electric Company - * - * Refer doc/imx/mkimage/imximage.txt for more details about how-to configure - * and create imximage boot image - * - * The syntax is taken as close as possible with the kwbimage - */ - -IMAGE_VERSION 2 -BOOT_FROM sd - -#define __ASSEMBLY__ -#include <config.h> -#include "asm/arch/mx6-ddr.h" -#include "asm/arch/iomux.h" -#include "asm/arch/crm_regs.h" - -#include "ddr-setup.cfg" -#include "samsung-2g.cfg" -#include "clocks.cfg" diff --git a/board/advantech/dms-ba16/micron-1g.cfg b/board/advantech/dms-ba16/micron-1g.cfg deleted file mode 100644 index 8cfefe28e21c..000000000000 --- a/board/advantech/dms-ba16/micron-1g.cfg +++ /dev/null @@ -1,63 +0,0 @@ -/* Calibrations */ -/* ZQ */ -DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xa1390003 -/* write leveling */ -DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x001F001F -DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F -DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x001F001F -DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x001F001F -/* Read DQS Gating calibration */ -DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x43480350 -DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x033C0340 -DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x43480350 -DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x03340314 -/* Read calibration */ -DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x382E2C32 -DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x38363044 -/* Write calibration */ -DATA 4 MX6_MMDC_P0_MPWRDLCTL, 0x3A38403A -DATA 4 MX6_MMDC_P1_MPWRDLCTL, 0x4432483E -/* read data bit delay */ -DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333 -DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333 -DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333 -DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333 -DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333 -DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333 -DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333 -DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333 - -/* Complete calibration by forced measurment */ -DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 -DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 - -/* MMDC init */ -DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036 -DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040 -DATA 4, MX6_MMDC_P0_MDCFG0, 0x555A79A5 -DATA 4, MX6_MMDC_P0_MDCFG1, 0xDB538E64 -DATA 4, MX6_MMDC_P0_MDCFG2, 0x01ff00db -DATA 4, MX6_MMDC_P0_MDMISC, 0x00001740 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000 -DATA 4, MX6_MMDC_P0_MDRWD, 0x000026d2 -DATA 4, MX6_MMDC_P0_MDOR, 0x005a1023 -DATA 4, MX6_MMDC_P0_MDASP, 0x00000027 -DATA 4, MX6_MMDC_P0_MDCTL, 0x831a0000 - -/* Initialize memory */ -DATA 4, MX6_MMDC_P0_MDSCR, 0x04088032 -DATA 4, MX6_MMDC_P0_MDSCR, 0x0408803a -DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 -DATA 4, MX6_MMDC_P0_MDSCR, 0x0000803b -DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00048039 -DATA 4, MX6_MMDC_P0_MDSCR, 0x09408030 -DATA 4, MX6_MMDC_P0_MDSCR, 0x09408038 -DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 -DATA 4, MX6_MMDC_P0_MDSCR, 0x04008048 -DATA 4, MX6_MMDC_P0_MDREF, 0x00005800 -DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00033337 -DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00033337 -DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576 -DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 diff --git a/board/advantech/dms-ba16/samsung-2g.cfg b/board/advantech/dms-ba16/samsung-2g.cfg deleted file mode 100644 index 4166cc9c57fb..000000000000 --- a/board/advantech/dms-ba16/samsung-2g.cfg +++ /dev/null @@ -1,63 +0,0 @@ -/* Calibrations */ -/* ZQ */ -DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xa1390003 -/* write leveling */ -DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x001F001F -DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F -DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x001F001F -DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x001F001F -/* Read DQS Gating calibration */ -DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x45380544 -DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x05280530 -DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x4530053C -DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x0530050C -/* Read calibration */ -DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x36303032 -DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x38363042 -/* Write calibration */ -DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x3A3A423E -DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x4A38483E -/* read data bit delay */ -DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333 -DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333 -DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333 -DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333 -DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333 -DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333 -DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333 -DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333 - -/* Complete calibration by forced measurment */ -DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 -DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 - -/* MMDC init */ -DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036 -DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040 -DATA 4, MX6_MMDC_P0_MDCFG0, 0x8A8F79A4 -DATA 4, MX6_MMDC_P0_MDCFG1, 0xDB538E64 -DATA 4, MX6_MMDC_P0_MDCFG2, 0x01ff00db -DATA 4, MX6_MMDC_P0_MDMISC, 0x00001740 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000 -DATA 4, MX6_MMDC_P0_MDRWD, 0x000026d2 -DATA 4, MX6_MMDC_P0_MDOR, 0x008F1023 -DATA 4, MX6_MMDC_P0_MDASP, 0x00000047 -DATA 4, MX6_MMDC_P0_MDCTL, 0x841a0000 - -/* Initialize memory */ -DATA 4, MX6_MMDC_P0_MDSCR, 0x04088032 -DATA 4, MX6_MMDC_P0_MDSCR, 0x0408803a -DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 -DATA 4, MX6_MMDC_P0_MDSCR, 0x0000803b -DATA 4, MX6_MMDC_P0_MDSCR, 0x00408031 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00408039 -DATA 4, MX6_MMDC_P0_MDSCR, 0x09408030 -DATA 4, MX6_MMDC_P0_MDSCR, 0x09408038 -DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 -DATA 4, MX6_MMDC_P0_MDSCR, 0x04008048 -DATA 4, MX6_MMDC_P0_MDREF, 0x00005800 -DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00011117 -DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00011117 -DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576 -DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 diff --git a/configs/dms-ba16-1g_defconfig b/configs/dms-ba16-1g_defconfig deleted file mode 100644 index f7b6bc6dedb3..000000000000 --- a/configs/dms-ba16-1g_defconfig +++ /dev/null @@ -1,66 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_MX6=y -CONFIG_SYS_TEXT_BASE=0x17800000 -CONFIG_NR_DRAM_BANKS=1 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0xC0000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_MX6Q=y -CONFIG_TARGET_ADVANTECH_DMS_BA16=y -CONFIG_SYS_DDR_1G=y -CONFIG_SUPPORT_RAW_INITRD=y -CONFIG_BOOTDELAY=1 -CONFIG_DEFAULT_FDT_FILE="imx6q-dms-ba16.dtb" -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_BOUNCE_BUFFER=y -CONFIG_DWC_AHSATA=y -CONFIG_SUPPORT_EMMC_BOOT=y -CONFIG_FSL_USDHC=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=20000000 -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y -CONFIG_PHYLIB=y -CONFIG_PHY_ATHEROS=y -CONFIG_MII=y -CONFIG_PWM_IMX=y -CONFIG_MXC_UART=y -CONFIG_SPI=y -CONFIG_MXC_SPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_USB_KEYBOARD=y -CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Advantech" -CONFIG_USB_GADGET_VENDOR_NUM=0x0525 -CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 -CONFIG_CI_UDC=y -CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_SYS_WHITE_ON_BLACK=y -CONFIG_SPLASH_SCREEN=y -CONFIG_SPLASH_SCREEN_ALIGN=y -CONFIG_OF_LIBFDT=y diff --git a/configs/dms-ba16_defconfig b/configs/dms-ba16_defconfig deleted file mode 100644 index c70808745478..000000000000 --- a/configs/dms-ba16_defconfig +++ /dev/null @@ -1,65 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_MX6=y -CONFIG_SYS_TEXT_BASE=0x17800000 -CONFIG_NR_DRAM_BANKS=1 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0xC0000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_MX6Q=y -CONFIG_TARGET_ADVANTECH_DMS_BA16=y -CONFIG_SUPPORT_RAW_INITRD=y -CONFIG_BOOTDELAY=1 -CONFIG_DEFAULT_FDT_FILE="imx6q-dms-ba16.dtb" -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_BOUNCE_BUFFER=y -CONFIG_DWC_AHSATA=y -CONFIG_SUPPORT_EMMC_BOOT=y -CONFIG_FSL_USDHC=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=20000000 -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y -CONFIG_PHYLIB=y -CONFIG_PHY_ATHEROS=y -CONFIG_MII=y -CONFIG_PWM_IMX=y -CONFIG_MXC_UART=y -CONFIG_SPI=y -CONFIG_MXC_SPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_USB_KEYBOARD=y -CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Advantech" -CONFIG_USB_GADGET_VENDOR_NUM=0x0525 -CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 -CONFIG_CI_UDC=y -CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_SYS_WHITE_ON_BLACK=y -CONFIG_SPLASH_SCREEN=y -CONFIG_SPLASH_SCREEN_ALIGN=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/advantech_dms-ba16.h b/include/configs/advantech_dms-ba16.h deleted file mode 100644 index 1ecb7c9df895..000000000000 --- a/include/configs/advantech_dms-ba16.h +++ /dev/null @@ -1,222 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2016 Timesys Corporation - * Copyright (C) 2016 Advantech Corporation - * Copyright (C) 2012 Freescale Semiconductor, Inc. - */ - -#ifndef __ADVANTECH_DMSBA16_CONFIG_H -#define __ADVANTECH_DMSBA16_CONFIG_H - -#include <asm/arch/imx-regs.h> -#include <asm/mach-imx/gpio.h> - -#define CONFIG_BOARD_NAME "Advantech DMS-BA16" - -#define CONFIG_MXC_UART_BASE UART4_BASE -#define CONSOLE_DEV "ttymxc3" -#define CONFIG_EXTRA_BOOTARGS "panic=10" - -#define CONFIG_BOOT_DIR "" -#define CONFIG_LOADCMD "fatload" -#define CONFIG_RFSPART "2" - -#include "mx6_common.h" -#include <linux/sizes.h> - -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_REVISION_TAG -#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) - -/* SATA Configs */ -#define CONFIG_SYS_SATA_MAX_DEVICE 1 -#define CONFIG_DWC_AHSATA_PORT_ID 0 -#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR -#define CONFIG_LBA48 - -/* MMC Configs */ -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 - -/* USB Configs */ -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 - -#define CONFIG_USBD_HS - -/* Networking Configs */ -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_ETHPRIME "FEC" -#define CONFIG_FEC_MXC_PHYADDR 4 - -/* Serial Flash */ - -#define CONFIG_LOADADDR 0x12000000 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "script=boot.scr\0" \ - "image=" CONFIG_BOOT_DIR "/uImage\0" \ - "uboot=u-boot.imx\0" \ - "fdt_file=" CONFIG_BOOT_DIR "/" CONFIG_DEFAULT_FDT_FILE "\0" \ - "fdt_addr=0x18000000\0" \ - "boot_fdt=yes\0" \ - "ip_dyn=yes\0" \ - "console=" CONSOLE_DEV "\0" \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ - "sddev=0\0" \ - "emmcdev=1\0" \ - "partnum=1\0" \ - "loadcmd=" CONFIG_LOADCMD "\0" \ - "rfspart=" CONFIG_RFSPART "\0" \ - "update_sd_firmware=" \ - "if test ${ip_dyn} = yes; then " \ - "setenv get_cmd dhcp; " \ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ - "if mmc dev ${mmcdev}; then " \ - "if ${get_cmd} ${update_sd_firmware_filename}; then " \ - "setexpr fw_sz ${filesize} / 0x200; " \ - "setexpr fw_sz ${fw_sz} + 1; " \ - "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ - "fi; " \ - "fi\0" \ - "update_sf_uboot=" \ - "if tftp $loadaddr $uboot; then " \ - "sf probe; " \ - "sf erase 0 0xC0000; " \ - "sf write $loadaddr 0x400 $filesize; " \ - "echo 'U-Boot upgraded. Please reset'; " \ - "fi\0" \ - "setargs=setenv bootargs console=${console},${baudrate} " \ - "root=/dev/${rootdev} rw rootwait " CONFIG_EXTRA_BOOTARGS "\0" \ - "loadbootscript=" \ - "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \ - "bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \ - " source\0" \ - "loadimage=" \ - "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \ - "loadfdt=${loadcmd} ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \ - "tryboot=" \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run doboot; " \ - "fi; " \ - "fi;\0" \ - "doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \ - "run setargs; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if run loadfdt; then " \ - "bootm ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootm; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi; " \ - "else " \ - "bootm; " \ - "fi;\0" \ - "netargs=setenv bootargs console=${console},${baudrate} " \ - "root=/dev/nfs " \ - "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ - "netboot=echo Booting from net ...; " \ - "run netargs; " \ - "if test ${ip_dyn} = yes; then " \ - "setenv get_cmd dhcp; " \ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ - "${get_cmd} ${image}; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ - "bootm ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootm; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi; " \ - "else " \ - "bootm; " \ - "fi;\0" \ - -#define CONFIG_BOOTCOMMAND \ - "usb start; " \ - "setenv dev usb; " \ - "setenv devnum 0; " \ - "setenv rootdev sda${rfspart}; " \ - "run tryboot; " \ - \ - "setenv dev mmc; " \ - "setenv rootdev mmcblk0p${rfspart}; " \ - \ - "setenv devnum ${sddev}; " \ - "if mmc dev ${devnum}; then " \ - "run tryboot; " \ - "fi; " \ - \ - "setenv devnum ${emmcdev}; " \ - "setenv rootdev mmcblk${emmcdev}p${rfspart}; " \ - "if mmc dev ${devnum}; then " \ - "run tryboot; " \ - "fi; " \ - \ - "bmode usb; " \ - -#define CONFIG_ARP_TIMEOUT 200UL - -/* Miscellaneous configurable options */ - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -/* Physical Memory Map */ -#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* FLASH and environment organization */ - -#define CONFIG_SYS_FSL_USDHC_NUM 3 - -/* Framebuffer */ -#define CONFIG_VIDEO_LOGO -#define CONFIG_VIDEO_BMP_LOGO -#define CONFIG_IMX_HDMI -#define CONFIG_IMX_VIDEO_SKIP - -#define CONFIG_IMX6_PWM_PER_CLK 66000000 - -#ifdef CONFIG_CMD_PCI -#define CONFIG_PCI_SCAN_SHOW -#define CONFIG_PCIE_IMX -#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) -#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5) -#endif - -/* I2C Configs */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_MXC_I2C1 -#define CONFIG_SYS_I2C_MXC_I2C2 -#define CONFIG_SYS_I2C_MXC_I2C3 - -#endif /* __ADVANTECH_DMSBA16_CONFIG_H */