This configuration is useful when you want to run small u-boot and perform DDR memory test to make sure that DDR is properly configured. It is use for board bringup because alternative u-boot memory tests is quite good. Configuration is running out of OCM.
As is done for others mini configurations 0x80 bytes for variables is enough and only default variables are stored there.
Alternative memtest is enabled and also 2GB of DDR via DTS files. Configuration is enabling ZYNQMP_PSU_INIT_ENABLED and include psu_init() from zcu102 for testing purpose. In case of size issue this can be moved to SPL configuration as is done for mini_qspi configuration but it is not a problem now.
Log: U-Boot 2018.11-00268-gbd58b8ba8915 (Nov 29 2018 - 15:33:35 +0100)
Model: ZynqMP MINI Board: Xilinx ZynqMP DRAM: WARNING: Initializing TCM overwrites TCM content 2 GiB EL Level: EL3 In: dcc Out: dcc Err: dcc ZynqMP>
Signed-off-by: Michal Simek michal.simek@xilinx.com ---
arch/arm/dts/Makefile | 1 + arch/arm/dts/zynqmp-mini.dts | 40 +++++++++++++++++++++++++++ board/xilinx/zynqmp/zynqmp-mini | 1 + configs/xilinx_zynqmp_mini_defconfig | 53 ++++++++++++++++++++++++++++++++++++ 4 files changed, 95 insertions(+) create mode 100644 arch/arm/dts/zynqmp-mini.dts create mode 120000 board/xilinx/zynqmp/zynqmp-mini create mode 100644 configs/xilinx_zynqmp_mini_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 84b7e5335c25..ed810e8b7438 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -156,6 +156,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ zynq-zybo-z7.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += \ avnet-ultra96-rev1.dtb \ + zynqmp-mini.dtb \ zynqmp-mini-emmc0.dtb \ zynqmp-mini-emmc1.dtb \ zynqmp-mini-nand.dtb \ diff --git a/arch/arm/dts/zynqmp-mini.dts b/arch/arm/dts/zynqmp-mini.dts new file mode 100644 index 000000000000..1faee9ec75ee --- /dev/null +++ b/arch/arm/dts/zynqmp-mini.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP Mini Configuration + * + * (C) Copyright 2017, Xilinx, Inc. + * + * Michal Simek michal.simek@xilinx.com + */ + +/dts-v1/; + +/ { + model = "ZynqMP MINI"; + compatible = "xlnx,zynqmp"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &dcc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0xfffc0000 0x0 0x40000>, <0x0 0x0 0x0 0x80000000>; + }; + + dcc: dcc { + compatible = "arm,dcc"; + status = "disabled"; + u-boot,dm-pre-reloc; + }; +}; + +&dcc { + status = "okay"; +}; diff --git a/board/xilinx/zynqmp/zynqmp-mini b/board/xilinx/zynqmp/zynqmp-mini new file mode 120000 index 000000000000..5a70cd2f5e13 --- /dev/null +++ b/board/xilinx/zynqmp/zynqmp-mini @@ -0,0 +1 @@ +zynqmp-zcu102-rev1.0 \ No newline at end of file diff --git a/configs/xilinx_zynqmp_mini_defconfig b/configs/xilinx_zynqmp_mini_defconfig new file mode 100644 index 000000000000..3785ed001979 --- /dev/null +++ b/configs/xilinx_zynqmp_mini_defconfig @@ -0,0 +1,53 @@ +CONFIG_ARM=y +CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_mini_qspi" +CONFIG_ARCH_ZYNQMP=y +CONFIG_SYS_TEXT_BASE=0xFFFC0000 +CONFIG_ENV_SIZE=0x80 +CONFIG_SYS_MEM_RSVD_FOR_MMU=y +CONFIG_ZYNQMP_PSU_INIT_ENABLED=y +# CONFIG_CMD_ZYNQMP is not set +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +# CONFIG_IMAGE_FORMAT_LEGACY is not set +# CONFIG_BOARD_LATE_INIT is not set +# CONFIG_DISPLAY_CPUINFO is not set +# CONFIG_CMDLINE_EDITING is not set +# CONFIG_AUTO_COMPLETE is not set +# CONFIG_SYS_LONGHELP is not set +CONFIG_SYS_PROMPT="ZynqMP> " +# CONFIG_AUTOBOOT is not set +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_BOOTM is not set +# CONFIG_CMD_BOOTI is not set +# CONFIG_CMD_ELF is not set +# CONFIG_CMD_FDT is not set +# CONFIG_CMD_GO is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EXPORTENV is not set +# CONFIG_CMD_IMPORTENV is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_SAVEENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_CRC32 is not set +CONFIG_CMD_MEMTEST=y +CONFIG_SYS_ALT_MEMTEST=y +# CONFIG_CMD_DM is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set +# CONFIG_PARTITIONS is not set +CONFIG_OF_EMBED=y +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini" +# CONFIG_NET is not set +# CONFIG_DM_WARN is not set +# CONFIG_DM_DEVICE_REMOVE is not set +# CONFIG_MMC is not set +# CONFIG_EFI_LOADER is not set