Add the counter of the PLL user n_pll_cons managed by the 2 functions stm32_usbphyc_pll_enable / stm32_usbphyc_pll_disable.
This counter allow to remove the function stm32_usbphyc_is_init and it is a preliminary step for ck_usbo_48m introduction.
Signed-off-by: Patrick Delaunay patrick.delaunay@foss.st.com ---
drivers/phy/phy-stm32-usbphyc.c | 76 +++++++++++++++++++++------------ 1 file changed, 48 insertions(+), 28 deletions(-)
diff --git a/drivers/phy/phy-stm32-usbphyc.c b/drivers/phy/phy-stm32-usbphyc.c index 9c1dcfae52..16c8799eca 100644 --- a/drivers/phy/phy-stm32-usbphyc.c +++ b/drivers/phy/phy-stm32-usbphyc.c @@ -65,6 +65,7 @@ struct stm32_usbphyc { bool init; bool powered; } phys[MAX_PHYS]; + int n_pll_cons; };
static void stm32_usbphyc_get_pll_params(u32 clk_rate, @@ -124,18 +125,6 @@ static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc) return 0; }
-static bool stm32_usbphyc_is_init(struct stm32_usbphyc *usbphyc) -{ - int i; - - for (i = 0; i < MAX_PHYS; i++) { - if (usbphyc->phys[i].init) - return true; - } - - return false; -} - static bool stm32_usbphyc_is_powered(struct stm32_usbphyc *usbphyc) { int i; @@ -148,18 +137,17 @@ static bool stm32_usbphyc_is_powered(struct stm32_usbphyc *usbphyc) return false; }
-static int stm32_usbphyc_phy_init(struct phy *phy) +static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc) { - struct stm32_usbphyc *usbphyc = dev_get_priv(phy->dev); - struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id; bool pllen = readl(usbphyc->base + STM32_USBPHYC_PLL) & PLLEN ? true : false; int ret;
- dev_dbg(phy->dev, "phy ID = %lu\n", phy->id); - /* Check if one phy port has already configured the pll */ - if (pllen && stm32_usbphyc_is_init(usbphyc)) - goto initialized; + /* Check if one consumer has already configured the pll */ + if (pllen && usbphyc->n_pll_cons) { + usbphyc->n_pll_cons++; + return 0; + }
if (usbphyc->vdda1v1) { ret = regulator_set_enable(usbphyc->vdda1v1, true); @@ -190,23 +178,19 @@ static int stm32_usbphyc_phy_init(struct phy *phy) if (!(readl(usbphyc->base + STM32_USBPHYC_PLL) & PLLEN)) return -EIO;
-initialized: - usbphyc_phy->init = true; + usbphyc->n_pll_cons++;
return 0; }
-static int stm32_usbphyc_phy_exit(struct phy *phy) +static int stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc) { - struct stm32_usbphyc *usbphyc = dev_get_priv(phy->dev); - struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id; int ret;
- dev_dbg(phy->dev, "phy ID = %lu\n", phy->id); - usbphyc_phy->init = false; + usbphyc->n_pll_cons--;
- /* Check if other phy port requires pllen */ - if (stm32_usbphyc_is_init(usbphyc)) + /* Check if other consumer requires pllen */ + if (usbphyc->n_pll_cons) return 0;
clrbits_le32(usbphyc->base + STM32_USBPHYC_PLL, PLLEN); @@ -235,6 +219,42 @@ static int stm32_usbphyc_phy_exit(struct phy *phy) return 0; }
+static int stm32_usbphyc_phy_init(struct phy *phy) +{ + struct stm32_usbphyc *usbphyc = dev_get_priv(phy->dev); + struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id; + int ret; + + dev_dbg(phy->dev, "phy ID = %lu\n", phy->id); + if (usbphyc_phy->init) + return 0; + + ret = stm32_usbphyc_pll_enable(usbphyc); + if (ret) + return log_ret(ret); + + usbphyc_phy->init = true; + + return 0; +} + +static int stm32_usbphyc_phy_exit(struct phy *phy) +{ + struct stm32_usbphyc *usbphyc = dev_get_priv(phy->dev); + struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id; + int ret; + + dev_dbg(phy->dev, "phy ID = %lu\n", phy->id); + if (!usbphyc_phy->init) + return 0; + + ret = stm32_usbphyc_pll_disable(usbphyc); + + usbphyc_phy->init = false; + + return log_ret(ret); +} + static int stm32_usbphyc_phy_power_on(struct phy *phy) { struct stm32_usbphyc *usbphyc = dev_get_priv(phy->dev);