Add a SPI device which can be used for testing SPI flash features in sandbox.
Also add a cros_ec device since with driver model the Chrome OS EC emulation will not otherwise be available.
Reviewed-by: Jagannadha Sutradharudu Teki jagannadh.teki@gmail.com Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v4: None Changes in v3: None Changes in v2: - Adjust binding to avoid Linux-specific mentions
arch/sandbox/dts/sandbox.dts | 26 ++++++++++++++++++++++++++ doc/device-tree-bindings/mtd/spi/spi-flash.txt | 25 +++++++++++++++++++++++++ 2 files changed, 51 insertions(+) create mode 100644 doc/device-tree-bindings/mtd/spi/spi-flash.txt
diff --git a/arch/sandbox/dts/sandbox.dts b/arch/sandbox/dts/sandbox.dts index 797478a..7614715 100644 --- a/arch/sandbox/dts/sandbox.dts +++ b/arch/sandbox/dts/sandbox.dts @@ -1,6 +1,9 @@ /dts-v1/;
/ { + #address-cells = <1>; + #size-cells = <0>; + chosen { stdout-path = "/serial"; }; @@ -131,4 +134,27 @@ num-gpios = <20>; };
+ spi@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + compatible = "sandbox,spi"; + cs-gpios = <0>, <&gpio_a 0>; + flash@0 { + reg = <0>; + compatible = "spansion,m25p16", "sandbox,spi-flash"; + spi-max-frequency = <40000000>; + sandbox,filename = "spi.bin"; + }; + }; + + cros-ec@0 { + compatible = "google,cros-ec"; + #address-cells = <1>; + #size-cells = <1>; + firmware_storage_spi: flash@0 { + reg = <0 0x400000>; + }; + }; + }; diff --git a/doc/device-tree-bindings/mtd/spi/spi-flash.txt b/doc/device-tree-bindings/mtd/spi/spi-flash.txt new file mode 100644 index 0000000..85522d8 --- /dev/null +++ b/doc/device-tree-bindings/mtd/spi/spi-flash.txt @@ -0,0 +1,25 @@ +* MTD SPI driver for serial flash chips + +Required properties: +- #address-cells, #size-cells : Must be present if the device has sub-nodes + representing partitions. +- compatible : Should be the manufacturer and the name of the chip. Bear in + mind that the DT binding is not U-Boot-only, but in case of + U-Boot, see spi_flash_params_table table in + drivers/mtd/spi/sf_params.c for the list of supported chips. +- reg : Chip-Select number +- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at + +Optional properties: + - memory-map : Address and size of the flash, if memory mapped. This may + apply to Intel chipsets, which tend to memory-map flash. + +Example: + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,m25p80"; + reg = <0>; + spi-max-frequency = <40000000>; + };