Add simple and meaningful kconfig option for rsb.c instead of using MACH type on Makefile.
Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- arch/arm/mach-sunxi/Kconfig | 10 ++++++++++ arch/arm/mach-sunxi/Makefile | 3 +-- 2 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index cf999ab..7ab1990 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -23,6 +23,14 @@ config MFD_SUN6I_PRCM Support for the PRCM (Power/Reset/Clock Management) unit available in A31 SoC.
+config SUNXI_RSB + bool "Allwinner sunXi Reduced Serial Bus Driver" + help + Say y here to enable support for Allwinner's Reduced Serial Bus + (RSB) support. This controller is responsible for communicating + with various RSB based devices, such as AXP223, AXP8XX PMICs, + and AC100/AC200 ICs. + config SUNXI_HIGH_SRAM bool default n @@ -185,6 +193,7 @@ config MACH_SUN9I select MFD_SUN6I_PRCM select SUNXI_HIGH_SRAM select SUNXI_GEN_SUN6I + select SUNXI_RSB select SUPPORT_SPL
config MACH_SUN50I @@ -213,6 +222,7 @@ endchoice # The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33" config MACH_SUN8I bool + select SUNXI_RSB select MFD_SUN6I_PRCM default y if MACH_SUN8I_A23 default y if MACH_SUN8I_A33 diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile index a6721ad..8f30979 100644 --- a/arch/arm/mach-sunxi/Makefile +++ b/arch/arm/mach-sunxi/Makefile @@ -18,8 +18,7 @@ obj-y += usb_phy.o endif obj-$(CONFIG_I2C_SUN6I_P2WI) += p2wi.o obj-$(CONFIG_MFD_SUN6I_PRCM) += prcm.o -obj-$(CONFIG_MACH_SUN8I) += rsb.o -obj-$(CONFIG_MACH_SUN9I) += rsb.o +obj-$(CONFIG_SUNXI_RSB) += rsb.o obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o obj-$(CONFIG_MACH_SUN5I) += clock_sun4i.o obj-$(CONFIG_MACH_SUN6I) += clock_sun6i.o