On 2023-09-06 17:01, Laurentiu Tudor wrote:
MC being a plain DMA master as any other device in the SoC and being live at OS boot time, as soon as the SMMU is probed it will immediately start triggering faults because there is no mapping in the SMMU for the MC. Pre-create such a mapping in the SMMU, being the OS's responsibility to preserve it.
Does U-Boot enable the SMMU? AFAICS the only thing it knows how to do is explicitly turn it *off*, therefore programming other registers appears to be a complete waste of time.
All that should matter to the OS, and that it is responsible for upholding, is the reserved memory regions from patch #2. For instance, if the OS is Linux, literally the first thing arm_smmu_device_reset() does is rewrite all the S2CRs and SMRs without so much as looking.
Thanks, Robin.
Signed-off-by: Laurentiu Tudor laurentiu.tudor@nxp.com
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 26 ++++++++++++++++--- .../asm/arch-fsl-layerscape/immap_lsch3.h | 9 +++++++ 2 files changed, 32 insertions(+), 3 deletions(-)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index 3bfdc3f77431..870b99838ab5 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c @@ -376,6 +376,18 @@ void bypass_smmu(void) val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK); out_le32(SMMU_NSCR0, val); }
+void setup_smmu_mc_bypass(int icid, int mask) +{
- u32 val;
- val = SMMU_SMR_VALID_MASK | (icid << SMMU_SMR_ID_SHIFT) |
(mask << SMMU_SMR_MASK_SHIFT);- out_le32(SMMU_REG_SMR(0), val);
- val = SMMU_S2CR_EXIDVALID_VALID_MASK | SMMU_S2CR_TYPE_BYPASS_MASK;
- out_le32(SMMU_REG_S2CR(0), val);
+}
- void fsl_lsch3_early_init_f(void) { erratum_rcw_src();
@@ -402,10 +414,18 @@ void fsl_lsch3_early_init_f(void) bypass_smmu(); #endif
-#if defined(CONFIG_ARCH_LS1088A) || defined(CONFIG_ARCH_LS1028A) || \
- defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LX2160A) || \
- defined(CONFIG_ARCH_LX2162A)
+#ifdef CONFIG_ARCH_LS1028A
- set_icids();
+#endif
+#if defined(CONFIG_ARCH_LS1088A) || defined(CONFIG_ARCH_LS2080A)
- set_icids();
- setup_smmu_mc_bypass(0x300, 0);
+#endif
+#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A) set_icids();
- setup_smmu_mc_bypass(0x4000, 0); #endif }
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index ca5e33379ba9..bec5355adaed 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -190,6 +190,15 @@ #define SCR0_CLIENTPD_MASK 0x00000001 #define SCR0_USFCFG_MASK 0x00000400
+#define SMMU_REG_SMR(n) (SMMU_BASE + 0x800 + ((n) << 2)) +#define SMMU_REG_S2CR(n) (SMMU_BASE + 0xc00 + ((n) << 2)) +#define SMMU_SMR_VALID_MASK 0x80000000 +#define SMMU_SMR_MASK_MASK 0xffff0000 +#define SMMU_SMR_MASK_SHIFT 16 +#define SMMU_SMR_ID_MASK 0x0000ffff +#define SMMU_SMR_ID_SHIFT 0 +#define SMMU_S2CR_EXIDVALID_VALID_MASK 0x00000400 +#define SMMU_S2CR_TYPE_BYPASS_MASK 0x00010000
/* PCIe */ #define CFG_SYS_PCIE1_ADDR (CONFIG_SYS_IMMR + 0x2400000)