Thank you so much, you made my day! Sorry, I didn't see the alias was used different.
Although my credibility gambled away I think I found a real bug in EQOS driver with fixed-phy:
In file fixed.c in in function fixedphy_config() the call
val = ofnode_read_u32_default(node, "speed", 0);
returns 0 instead of 1000 and also the duplex is not set. I found that in file/function dwc_eth_qos.c / eqos_start() the line
eqos->phy->node = eqos->phy_of_node;
is reponsible for losing the info. Don't know what magic happens here - so I can't fix it - just followed the data. So all works well and even the parsing of old and new fixed-link devicetree works til that line. After that I don't get speed anymore. Can someone please confirm?
Best regards,
Elmar
Am 13.02.23 um 00:38 schrieb Fabio Estevam:
Hi Elmar,
On Sun, Feb 12, 2023 at 3:04 PM Elmar Psilog epsi@gmx.de wrote:
Hello, kindly ask for help about SPI at an IMX8MP. I tried latest 2023.01. If you can please have a look and check it works on your side?
sspi command returns: Invalid bus 0
Could you try passing an aliases entry in your dts like this?
aliases { spi0 = &ecspi1; };
Does this help?
What am I doing wrong or is this a bug? Thanks ahead for any hint. dt: (tested with both types of cs-gpios) &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; cs-gpios = <0>, <&gpio5 9 GPIO_ACTIVE_LOW>; // cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
This last format is the correct one.