From: Simon Schwarz simonschwarzcor@googlemail.com
- Implements spl_start_uboot() for devkit8000 - Add configs to activate direct OS boot from SPL
Signed-off-by: Simon Schwarz simonschwarzcor@gmail.com CC: Tom Rini tom.rini@gmail.com CC: Stefano Babic sbabic@denx.de CC: Wolfgang Denk wd@denx.de ---
V10 changes: sliced from the implementation added an implementation of spl_start_uboot for devkit8000
board/timll/devkit8000/devkit8000.c | 18 ++++++++++++++++++ include/configs/devkit8000.h | 7 +++++-- 2 files changed, 23 insertions(+), 2 deletions(-)
diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c index 05de3c1..6ca4fe2 100644 --- a/board/timll/devkit8000/devkit8000.c +++ b/board/timll/devkit8000/devkit8000.c @@ -41,6 +41,7 @@ #include <asm/arch/mem.h> #include <asm/mach-types.h> #include "devkit8000.h" +#include <asm/gpio.h> #ifdef CONFIG_DRIVER_DM9000 #include <net.h> #include <netdev.h> @@ -160,6 +161,23 @@ void spl_board_prepare_for_linux(void) gpmc_dm9000_config(); }
+/* + * devkit8000 specific implementation of spl_start_uboot() + * + * RETURN + * 0 if the button is not pressed + * 1 if the button is pressed + */ +int spl_start_uboot(void) +{ + int val = 0; + if (!gpio_request(CONFIG_SPL_OS_BOOT_KEY, "U-Boot key")) { + gpio_direction_input(CONFIG_SPL_OS_BOOT_KEY); + val = gpio_get_value(CONFIG_SPL_OS_BOOT_KEY); + gpio_free(CONFIG_SPL_OS_BOOT_KEY); + } + return !val; +} #endif
/* diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index e323877..eb7c376 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -35,7 +35,7 @@ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3_DEVKIT8000 1 /* working with DevKit8000 */ - +#define CONFIG_MACH_TYPE MACH_TYPE_DEVKIT8000 /* * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM * 64 bytes before this address should be set aside for u-boot.img's @@ -327,7 +327,7 @@ #define CONFIG_SPL_MAX_SIZE 0xB400 /* 45 K */ #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
-#define CONFIG_SPL_BSS_START_ADDR 0x80000000 /*CONFIG_SYS_SDRAM_BASE*/ +#define CONFIG_SPL_BSS_START_ADDR 0x80000500 /* leave space for bootargs*/ #define CONFIG_SPL_BSS_MAX_SIZE 0x80000
/* NAND boot config */ @@ -352,6 +352,9 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */
/* SPL OS boot options */ +#define CONFIG_SPL_OS_BOOT +#define CONFIG_SPL_OS_BOOT_KEY 26 + #define CONFIG_CMD_SPL #define CONFIG_CMD_SPL_WRITE_SIZE 0x400 /* 1024 byte */ #define CONFIG_CMD_SPL_NAND_OFS (CONFIG_SYS_NAND_SPL_KERNEL_OFFS+\