On Thursday 09 July 2009 16:59:02 Heiko Schocher wrote:
board/keymile/kmeter1/Makefile | 2 +- board/keymile/kmeter1/nand.c
I suggest to move this NAND driver into the drivers/mtd/nand directory (e.g. drivers/mtd/nand/kmeter1_nand.c). We try to collect all drivers here. This makes maintenance easier.
Hmm... this is not a "nand driver", just some board specific functions.
Yes, it's still a NAND driver. Please take a look at a few of the other "drivers" in this directory. E.g. drivers/mtd/nand/atmel_nand.c. You will see that those are similar to your board specific driver. Implementing the HW- interface for the NAND infrastructure.
Should this go really in "drivers/mtd/nand"?
Yes, please.
Thanks.
Best regards, Stefan
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================