Drop the local USB nodes after Linux 5.12 sync.
Signed-off-by: Neil Armstrong narmstrong@baylibre.com --- arch/arm/dts/meson-axg-s400-u-boot.dtsi | 8 ---- arch/arm/dts/meson-axg-u-boot.dtsi | 62 ------------------------- 2 files changed, 70 deletions(-) delete mode 100644 arch/arm/dts/meson-axg-u-boot.dtsi
diff --git a/arch/arm/dts/meson-axg-s400-u-boot.dtsi b/arch/arm/dts/meson-axg-s400-u-boot.dtsi index 2c4b06f140..334650d610 100644 --- a/arch/arm/dts/meson-axg-s400-u-boot.dtsi +++ b/arch/arm/dts/meson-axg-s400-u-boot.dtsi @@ -3,8 +3,6 @@ * Copyright (c) 2017 Amlogic, Inc. All rights reserved. */
-#include "meson-axg-u-boot.dtsi" - /* wifi module */ &sd_emmc_b { status = "disabled"; @@ -15,12 +13,6 @@ status = "okay"; };
-&usb { - status = "okay"; - dr_mode = "otg"; - vbus-supply = <&usb_pwr>; -}; - &usb2_phy1 { phy-supply = <&vcc_5v>; }; diff --git a/arch/arm/dts/meson-axg-u-boot.dtsi b/arch/arm/dts/meson-axg-u-boot.dtsi deleted file mode 100644 index cb1c71e78c..0000000000 --- a/arch/arm/dts/meson-axg-u-boot.dtsi +++ /dev/null @@ -1,62 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 BayLibre, SAS. - * Author: Neil Armstrong narmstrong@baylibre.com - */ - -/ { - soc { - usb: usb@ffe09080 { - compatible = "amlogic,meson-gxl-usb-ctrl"; - reg = <0x0 0xffe09080 0x0 0x20>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>; - clock-names = "usb_ctrl", "ddr"; - resets = <&reset RESET_USB_OTG>; - - dr_mode = "otg"; - - phys = <&usb2_phy1>; - phy-names = "usb2-phy1"; - - dwc2: usb@ff400000 { - compatible = "amlogic,meson-g12a-usb", "snps,dwc2"; - reg = <0x0 0xff400000 0x0 0x40000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkc CLKID_USB1>; - clock-names = "otg"; - phys = <&usb2_phy1>; - dr_mode = "peripheral"; - g-rx-fifo-size = <192>; - g-np-tx-fifo-size = <128>; - g-tx-fifo-size = <128 128 16 16 16>; - }; - - dwc3: usb@ff500000 { - compatible = "snps,dwc3"; - reg = <0x0 0xff500000 0x0 0x100000>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - dr_mode = "host"; - maximum-speed = "high-speed"; - snps,dis_u2_susphy_quirk; - }; - }; - }; -}; - -&apb { - usb2_phy1: phy@9020 { - compatible = "amlogic,meson-gxl-usb2-phy"; - #phy-cells = <0>; - reg = <0x0 0x9020 0x0 0x20>; - clocks = <&clkc CLKID_USB>; - clock-names = "phy"; - resets = <&reset RESET_USB_OTG>; - reset-names = "phy"; - status = "okay"; - }; -};