Hi Stefan,
In testing my merge of Korat PPC440EPx board support into PPC4xx branch "for-1.3.2", I found problem with the "DIAG RUN CACHE" command. The same problem occurs in the latest for-1.3.2 code for sequoia. Here is a copy of the console output showing what happens:
=> diag run cache Bad trap at PC: ff70220, SR: 21000, vector=1300 NIP: 0FF70220 XER: 2000005F LR: 0FF702D4 REGS: 0ff17870 TRAP: 1300 DEAR: 10000000 MSR: 00021000 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
GPR00: 0000003F 0FF17960 7FFFFFFF 10000000 00000400 00000400 00000020 FFFFFFFF GPR08: 0FFFBFEC 0FF6F888 0000000C 10000000 00000400 00000000 0FFABD00 0FFBA000 GPR16: 15809012 22406001 C1904012 0FF17B6A 00000001 00000000 0FF17C65 00000000 GPR24: 00000600 0000000C 00000000 00000001 0FFA6AE8 0FF17F34 0FFAC714 0FF6F7DC Call backtrace: 0FF17A44 0FF6B0E8 0FF6B4AC 0FF734D0 0FF71270 0FF71450 0FF5ECA4 0FF5C6B8 F1FFFFFF Exception
U-Boot 1.3.1-g76ace773 (Dec 20 2007 - 17:07:17)
CPU: AMCC PowerPC 440EPx Rev. A at 528 MHz (PLB=132, OPB=66, EBC=66 MHz) Security/Kasumi support Bootstrap Option H - Boot ROM Location I2C (Addr 0x52) Internal PCI arbiter enabled, PCI async ext clock used 32 kB I-Cache 32 kB D-Cache Board: Sequoia - AMCC PPC440EPx Evaluation Board, Rev. F, PCI=33 MHz, serial# 52149 I2C: ready DTT: 1 is 24 C DRAM: 256 MB FLASH: 64 MB NAND: 32 MiB PCI: Bus Dev VenId DevId Class Int In: serial Out: serial Err: serial USB: Host(int phy) Device(ext phy) Net: ppc_4xx_eth0, ppc_4xx_eth1
Type "run flash_nfs" to mount root filesystem over NFS
=>
This problem does not occur on sequoia using the latest mainline (i.e., master branch) code from the PPC4xx repository.
Just thought you'd like to know. :-)
Best regards, Larry