-----Original Message----- From: Albert ARIBAUD [mailto:albert.aribaud@free.fr] Sent: Monday, November 29, 2010 4:03 PM To: u-boot@lists.denx.de Cc: Premi, Sanjeev Subject: Re: Build failures with older toolchain
Le 29/11/2010 10:47, Premi, Sanjeev a écrit :
Albert,
I saw some more - what I believe related changes - since last week; but the linker error still persists.
with 2009-q1 toolchain:
busb_phy.o drivers/video/libvideo.o
drivers/watchdog/libwatchdog.o common/libcommon.o lib/libfdt/libfdt.o api/libapi.o post/libpost.o arch/arm/cpu/armv7/omap-common/libomap-common.o board/ti/evm/libevm.o --end-group /db/psp_git/users/a0756819/u-boot/arch/arm/lib/eabi_compat.o -L /opt/codesourcery/2009q1-203/bin/../lib/gcc/arm-none-linux-gnu eabi/4.3.3 -lgcc -Map u-boot.map -o u-boot
arm-none-linux-gnueabi-ld: section .bss [8003f5c0 ->
8007e31f] overlaps section .rel.dyn [8003f5c0 -> 80044e4f]
arm-none-linux-gnueabi-ld: section .dynsym [80044e50 ->
80044eef] overlaps section .bss [8003f5c0 -> 8007e31f]
arm-none-linux-gnueabi-ld: u-boot: section .bss vma
0x8003f5c0 overlaps previous sections
make: *** [u-boot] Error 1
with 2010-q1 toolchain:
mmon/libomap-common.o board/ti/evm/libevm.o --end-group
/db/psp_git/users/a0756819/u-boot/arch/arm/lib/eabi_compat.o -L /opt/codesourcery/2010q1-202/bin/../lib/gcc/arm-none-linux-gnu eabi/4.4.1/armv4t -lgcc -Map u-boot.map -o u-boot
arm-none-linux-gnueabi-ld: u-boot: section .bss vma
0x8003e8e0 overlaps previous sections
arm-none-linux-gnueabi-objcopy -O srec u-boot u-boot.srec arm-none-linux-gnueabi-objcopy --gap-fill=0xff -O binary
u-boot u-boot.bin
Weird... I've compiled v2010.12-rc2, for boards omap3_evm, omap3_overo and omap3_beagle, with 2010q1, and here is what I get, which is quite different from what you get:
albert@lilith:~/src/u-boot$ ./MAKEALL omap3_evm omap3_overo omap3_beagle Configuring for omap3_evm board... start.S: Assembler messages: start.S:144: Error: constant expression expected -- `ldr sp,=((0x4020FFFC-CONFIG_SYS_GBL_DATA_SIZE))' make[1]: *** [start.o] Erreur 1 make: *** [arch/arm/cpu/armv7/start.o] Erreur 2 make: *** Attente des tâches non terminées.... arm-none-linux-gnueabi-size: './u-boot': No such file Configuring for omap3_overo board... text data bss dec hex filename 212965 10840 210624 434429 6a0fd ./u-boot Configuring for omap3_beagle board... text data bss dec hex filename 243182 11300 203648 458130 6fd92 ./u-boot
--------------------- SUMMARY ---------------------------- Boards compiled: 3 Boards with warnings or errors: 1 ( omap3_evm )
albert@lilith:~/src/u-boot$
[sp] Did you apply the patch I sent to off-the-list? (pasted below)
I had been holding this patch until until the problem is really solved - just in case there was a relation.
[patch] diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index aeb45c6..c93f689 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -348,7 +348,9 @@ extern unsigned int boot_flash_type; * Support for relocation */ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - CONFIG_SYS_GBL_D +#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK \ + - GENERATED_GBL_DATA_SIZE) +
/* * Define the board revision statically [/patch]
Best regards, Sanjeev
Amicalement,
Albert.