Refresh for newer kernel. Prepare ENV settings for sheevaplugs to be OpenWRT ready.
+----------+ | UBOOT | >> 896 Kb (7x128) = uboot +----------+ | ENV | >> 128 Kb = uboot_env +----------+ | ROOT(FS) | >> 511 Mb @ 1 Mb = root -> rootfs (ubifs) +----------+
With (CC) TRUNK OpenWRT build (QUICK HOWTO) :
<INTERRUPT> Marvell>> nand erase.part root Marvell>> ubi part root Marvell>> ubi remove rootfs Marvell>> ubi create rootfs Marvell>> usb reset Marvell>> fatload usb 2:1 0x800000 guruplug/openwrt/openwrt-kirkwood-guruplug-rootfs.ubifs Marvell>> ubi write 0x800000 rootfs ${filesize} Marvell>> reset
Changes in v1: - ADD generic board define - ADD FDT support - ADD HUSH interpreter - Define new NAND partition mapping
Signed-off-by: Gerald Kerma dreagle@doukki.net --- include/configs/guruplug.h | 84 ++++++++++++++++++++++++++++++++++++---------- 1 file changed, 67 insertions(+), 17 deletions(-)
diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h index a56a4cb..8e53af8 100644 --- a/include/configs/guruplug.h +++ b/include/configs/guruplug.h @@ -1,5 +1,6 @@ /* - * (C) Copyright 2009 + * (C) Copyright 2009-2014 + * Gerald Kerma dreagle@doukki.net * Marvell Semiconductor <www.marvell.com> * Written-by: Siddarth Gore gores@marvell.com * @@ -9,6 +10,8 @@ #ifndef _CONFIG_GURUPLUG_H #define _CONFIG_GURUPLUG_H
+#define CONFIG_SYS_GENERIC_BOARD + /* * Version number information */ @@ -23,17 +26,36 @@ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
/* + * Compression configuration + */ +#define CONFIG_BZIP2 +#define CONFIG_LZMA +#define CONFIG_LZO + +/* + * Enable device tree support + */ +#define CONFIG_OF_LIBFDT + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ + +/* * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ #include <config_cmd_default.h> +#define CONFIG_CMD_BOOTZ #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV -#define CONFIG_CMD_FAT +#define CONFIG_CMD_IDE +#define CONFIG_CMD_MII #define CONFIG_CMD_NAND #define CONFIG_CMD_PING #define CONFIG_CMD_USB -#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT
/* * mv-common.h should be defined after CMD configs since it used them @@ -55,24 +77,38 @@ * it has to be rounded to sector size */ #define CONFIG_ENV_SIZE 0x20000 /* 128k */ -#define CONFIG_ENV_ADDR 0x60000 -#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ +#define CONFIG_ENV_OFFSET 0xE0000 /* env starts here */
/* * Default environment variables */ -#define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \ - "${x_bootcmd_ethernet}; setenv ethact egiga1; " \ - "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\ - "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ - "bootm 0x6400000;" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "x_bootcmd_ethernet=ping 192.168.2.1\0" \ - "x_bootcmd_usb=usb start\0" \ - "x_bootcmd_kernel=nand read.e 0x6400000 0x100000 0x400000\0" \ - "x_bootargs=console=ttyS0,115200\0" \ - "x_bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0" +#define CONFIG_BOOTCOMMAND \ + "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ + "ubi part root; " \ + "ubifsmount ubi:rootfs; " \ + "ubifsload 0x800000 ${kernel}; " \ + "ubifsload 0x700000 ${fdt}; " \ + "ubifsumount; " \ + "fdt addr 0x700000; fdt resize; fdt chosen; " \ + "bootz 0x800000 - 0x700000" + +#define CONFIG_MTDPARTS \ + "mtdparts=orion_nand:" \ + "896K(uboot),128K(uboot_env)," \ + "-@1M(root)\0" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "console=console=ttyS0,115200\0" \ + "mtdids=nand0=orion_nand\0" \ + "mtdparts="CONFIG_MTDPARTS \ + "kernel=/boot/zImage\0" \ + "fdt=/boot/guruplug-server-plus.dtb\0" \ + "bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0" + +#define MTDIDS_DEFAULT "nand0=orion_nand" + +#define MTDPARTS_DEFAULT \ + "mtdparts="CONFIG_MTDPARTS
/* * Ethernet Driver configuration @@ -89,6 +125,20 @@ #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET #endif /*CONFIG_MVSATA_IDE*/
+/* + * File system + */ +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_RBTREE +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_MTDPARTS + #define CONFIG_SYS_ALT_MEMTEST
#endif /* _CONFIG_GURUPLUG_H */