Hi,
On 25/06/18 11:37, Icenowy Zheng wrote:
The UART0 on H6 is available at PH bank (and PF bank, but the PF one is muxed with SD card).
Add pinmux configuration.
Signed-off-by: Icenowy Zheng icenowy@aosc.io
Reviewed-by: Andre Przywara andre.przywara@arm.com
Thanks, Andre.
arch/arm/include/asm/arch-sunxi/gpio.h | 1 + arch/arm/mach-sunxi/board.c | 4 ++++ 2 files changed, 5 insertions(+)
diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index 24f85206c8..5acc3033f5 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -198,6 +198,7 @@ enum sunxi_gpio_number { #define SUN6I_GPH_TWI2 2 #define SUN6I_GPH_UART0 2 #define SUN9I_GPH_UART0 2 +#define SUN50I_H6_GPH_UART0 2
#define SUNXI_GPI_SDC3 2 #define SUN7I_GPI_TWI3 3 diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c index 8105a7dbfc..b04a005efc 100644 --- a/arch/arm/mach-sunxi/board.c +++ b/arch/arm/mach-sunxi/board.c @@ -108,6 +108,10 @@ static int gpio_init(void) sunxi_gpio_set_cfgpin(SUNXI_GPB(8), SUN50I_GPB_UART0); sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN50I_GPB_UART0); sunxi_gpio_set_pull(SUNXI_GPB(9), SUNXI_GPIO_PULL_UP); +#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN50I_H6)
- sunxi_gpio_set_cfgpin(SUNXI_GPH(0), SUN50I_H6_GPH_UART0);
- sunxi_gpio_set_cfgpin(SUNXI_GPH(1), SUN50I_H6_GPH_UART0);
- sunxi_gpio_set_pull(SUNXI_GPH(1), SUNXI_GPIO_PULL_UP);
#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_A83T) sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN8I_A83T_GPB_UART0); sunxi_gpio_set_cfgpin(SUNXI_GPB(10), SUN8I_A83T_GPB_UART0);