Import Linux 6.3-rc7 Device tree and necessary bindings for Amlogic A1 board from 6a8f57ae2eb0 ("Linux 6.3-rc7").
Signed-off-by: Igor Prusov ivprusov@sberdevices.ru Reviewed-by: Neil Armstrong neil.armstrong@linaro.org --- arch/arm/dts/meson-a1.dtsi | 161 +++++++++++++++++++++++ include/dt-bindings/gpio/meson-a1-gpio.h | 73 ++++++++++ 2 files changed, 234 insertions(+) create mode 100644 arch/arm/dts/meson-a1.dtsi create mode 100644 include/dt-bindings/gpio/meson-a1-gpio.h
diff --git a/arch/arm/dts/meson-a1.dtsi b/arch/arm/dts/meson-a1.dtsi new file mode 100644 index 0000000000..6509329b85 --- /dev/null +++ b/arch/arm/dts/meson-a1.dtsi @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/gpio/meson-a1-gpio.h> + +/ { + compatible = "amlogic,a1"; + + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + l2: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x800000>; + alignment = <0x0 0x400000>; + linux,cma-default; + }; + }; + + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + + pwrc: power-controller { + compatible = "amlogic,meson-a1-pwrc"; + #power-domain-cells = <1>; + status = "okay"; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + apb: bus@fe000000 { + compatible = "simple-bus"; + reg = <0x0 0xfe000000 0x0 0x1000000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>; + + reset: reset-controller@0 { + compatible = "amlogic,meson-a1-reset"; + reg = <0x0 0x0 0x0 0x8c>; + #reset-cells = <1>; + }; + + periphs_pinctrl: pinctrl@400 { + compatible = "amlogic,meson-a1-periphs-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio: bank@400 { + reg = <0x0 0x0400 0x0 0x003c>, + <0x0 0x0480 0x0 0x0118>; + reg-names = "mux", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 0 62>; + }; + + }; + + uart_AO: serial@1c00 { + compatible = "amlogic,meson-gx-uart", + "amlogic,meson-ao-uart"; + reg = <0x0 0x1c00 0x0 0x18>; + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&xtal>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + + uart_AO_B: serial@2000 { + compatible = "amlogic,meson-gx-uart", + "amlogic,meson-ao-uart"; + reg = <0x0 0x2000 0x0 0x18>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&xtal>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + }; + + gic: interrupt-controller@ff901000 { + compatible = "arm,gic-400"; + reg = <0x0 0xff901000 0x0 0x1000>, + <0x0 0xff902000 0x0 0x2000>, + <0x0 0xff904000 0x0 0x2000>, + <0x0 0xff906000 0x0 0x2000>; + interrupt-controller; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + #interrupt-cells = <3>; + #address-cells = <0>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; + }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; +}; diff --git a/include/dt-bindings/gpio/meson-a1-gpio.h b/include/dt-bindings/gpio/meson-a1-gpio.h new file mode 100644 index 0000000000..40e57a5ff1 --- /dev/null +++ b/include/dt-bindings/gpio/meson-a1-gpio.h @@ -0,0 +1,73 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + * Author: Qianggui Song qianggui.song@amlogic.com + */ + +#ifndef _DT_BINDINGS_MESON_A1_GPIO_H +#define _DT_BINDINGS_MESON_A1_GPIO_H + +#define GPIOP_0 0 +#define GPIOP_1 1 +#define GPIOP_2 2 +#define GPIOP_3 3 +#define GPIOP_4 4 +#define GPIOP_5 5 +#define GPIOP_6 6 +#define GPIOP_7 7 +#define GPIOP_8 8 +#define GPIOP_9 9 +#define GPIOP_10 10 +#define GPIOP_11 11 +#define GPIOP_12 12 +#define GPIOB_0 13 +#define GPIOB_1 14 +#define GPIOB_2 15 +#define GPIOB_3 16 +#define GPIOB_4 17 +#define GPIOB_5 18 +#define GPIOB_6 19 +#define GPIOX_0 20 +#define GPIOX_1 21 +#define GPIOX_2 22 +#define GPIOX_3 23 +#define GPIOX_4 24 +#define GPIOX_5 25 +#define GPIOX_6 26 +#define GPIOX_7 27 +#define GPIOX_8 28 +#define GPIOX_9 29 +#define GPIOX_10 30 +#define GPIOX_11 31 +#define GPIOX_12 32 +#define GPIOX_13 33 +#define GPIOX_14 34 +#define GPIOX_15 35 +#define GPIOX_16 36 +#define GPIOF_0 37 +#define GPIOF_1 38 +#define GPIOF_2 39 +#define GPIOF_3 40 +#define GPIOF_4 41 +#define GPIOF_5 42 +#define GPIOF_6 43 +#define GPIOF_7 44 +#define GPIOF_8 45 +#define GPIOF_9 46 +#define GPIOF_10 47 +#define GPIOF_11 48 +#define GPIOF_12 49 +#define GPIOA_0 50 +#define GPIOA_1 51 +#define GPIOA_2 52 +#define GPIOA_3 53 +#define GPIOA_4 54 +#define GPIOA_5 55 +#define GPIOA_6 56 +#define GPIOA_7 57 +#define GPIOA_8 58 +#define GPIOA_9 59 +#define GPIOA_10 60 +#define GPIOA_11 61 + +#endif /* _DT_BINDINGS_MESON_A1_GPIO_H */