At present SPL is used on 64-bit platforms, to allow SPL to be built as a 32-bit program and U-Boot proper to be built as 64-bit.
However it is useful to be able to use SPL on any x86 platform, where U-Boot needs to be updated in the field. Then SPL can select which U-Boot to run (A or B) and most of the code can be updated. Similarly, using TPL allows both SPL and U-Boot to be updated. This is the best approach, since it means that all of U-Boot proper as well as SPL (in particular SDRAM init) can be updated in the field. This provides for the smallest possible amount of read-only (non-updateable) code: just the TPL code.
This series contains a number of changes to allow x86 boards to use TPL, SPL and U-Boot proper. As a test, it is enabled for samus with a new chromebook_samus_tpl board.
Changes in v2: - Update commit message to mention dropping the \n - Update testSelectImage() to test in normal and verbose modes - Update the commit message to explain the implications on aliases - Add a better explanation of the logic change, in the commit message - Fix map output when section offset is not set (make it 0) - Add a test for sections with offsets - Update the comment in fsp_cap.S too - Update commit message to make it clear this patch is just for broadwell - Bring in sdram_console_tx_byte() to allow debugging - Add xorl to TPL code also - Update comments in start_from_tpl to correctly explain SPL state - Add new patch to separate out the EFI code in sysreset - Add new patch to add an ioctl to read power-management info - Add new patch to implement PCH_REQ_PMBASE_INFO on ivybridge - Add new patch to implement PCH_REQ_PMBASE_INFO on broadwell - Add new patch to implement power-off if available - Add new patch to enable the RTC in Kconfig - Add a new patch to update PCH to work in TPL - Add a new patch allowing jumping from TPL to SPL - Sort defconfig and adjust it to build after rebase on maste
Simon Glass (50): binman: Don't generate an error in 'text' entry constructor binman: Don't show image-skip message by default binman: Add a missing comment in Entry_vblock dm: core: Fix translate condition in ofnode_get_addr_size() cros_ec: Use a hyphen in the uclass name spl: Allow sandbox to build a device-tree file binman: Allow sections to have an offset x86: start64: Fix copyright message x86: mp_init: Use proper error numbers x86: Add a way to reinit the cpu x86: dts: Add device-tree labels for rtc and reset x86: Update a stale comment about ifdtool x86: Support SPL and TPL x86: Support booting with TPL x86: Add a handoff header file x86: broadwell: Improve SDRAM debugging output x86: broadwell: Allow SDRAM init from SPL x86: Move init of debug UART to cpu.c x86: broadwell: Split CPU init x86: Add support for starting from SPL/TPL x86: Allow 16-bit init to be in TPL x86: broadwell: Allow booting from SPL x86: broadwell: Select refcode and CPU code for SPL x86: Add common Intel code for SPL x86: Support saving MRC data from SPL x86: Add a simple TPL implementation x86: mrccache: Add more debugging x86: sysreset: Separate out the EFI code x86: pch: Add an ioctl to read power-management info x86: ivybridge: Implement PCH_REQ_PMBASE_INFO x86: broadwell: Implement PCH_REQ_PMBASE_INFO x86: sysreset: Implement power-off if available x86: Support TPL in Intel common code x86: Don't set up MTRRs in SPL x86: Don't generate a bootstage report in SPL x86: Support PCI VGA ROM when TPL is used x86: sysreset: Implement the get_last() method x86: Add documention on the samus flashmap x86: samus: Update device tree for SPL x86: samus: Update device tree for verified boot x86: Update device tree for TPL x86: Update device tree for Chromium OS verified boot x86: Fix device-tree indentation x86: samus: Increase the pre-reloc memory again Revert "pci: Scale MAX_PCI_REGIONS based on CONFIG_NR_DRAM_BANKS" x86: Enable the RTC on all boards x86: Update the memory map a little x86: broadwell: Update PCH to work in TPL x86: Add a way to jump from TPL to SPL x86: samus: Add a target to boot through TPL
Makefile | 1 + arch/Kconfig | 32 + arch/x86/Kconfig | 10 +- arch/x86/Makefile | 16 +- arch/x86/cpu/Makefile | 15 +- arch/x86/cpu/broadwell/Makefile | 23 +- arch/x86/cpu/broadwell/cpu.c | 676 +-------------------- arch/x86/cpu/broadwell/cpu_from_spl.c | 63 ++ arch/x86/cpu/broadwell/cpu_full.c | 694 ++++++++++++++++++++++ arch/x86/cpu/broadwell/northbridge.c | 100 ++++ arch/x86/cpu/broadwell/pch.c | 37 +- arch/x86/cpu/broadwell/sdram.c | 136 +---- arch/x86/cpu/i386/cpu.c | 113 ++-- arch/x86/cpu/intel_common/Makefile | 17 +- arch/x86/cpu/intel_common/car.S | 2 +- arch/x86/cpu/intel_common/cpu_from_spl.c | 27 + arch/x86/cpu/ivybridge/bd82x6x.c | 15 + arch/x86/cpu/mp_init.c | 10 +- arch/x86/cpu/start.S | 13 + arch/x86/cpu/start64.S | 2 +- arch/x86/cpu/start_from_spl.S | 71 +++ arch/x86/cpu/start_from_tpl.S | 49 ++ arch/x86/cpu/u-boot-spl.lds | 2 +- arch/x86/cpu/x86_64/cpu.c | 5 + arch/x86/dts/chromebook_samus.dts | 60 +- arch/x86/dts/reset.dtsi | 2 +- arch/x86/dts/rtc.dtsi | 2 +- arch/x86/dts/u-boot.dtsi | 154 +++-- arch/x86/include/asm/handoff.h | 15 + arch/x86/include/asm/mrccache.h | 11 + arch/x86/include/asm/spl.h | 17 +- arch/x86/include/asm/u-boot-x86.h | 20 + arch/x86/lib/Makefile | 9 +- arch/x86/lib/bootm.c | 2 +- arch/x86/lib/fsp/fsp_car.S | 2 +- arch/x86/lib/init_helpers.c | 5 +- arch/x86/lib/mrccache.c | 52 +- arch/x86/lib/spl.c | 44 +- arch/x86/lib/tpl.c | 118 ++++ board/google/Kconfig | 8 + board/google/chromebook_samus/Kconfig | 14 +- board/google/chromebook_samus/MAINTAINERS | 7 + configs/chromebook_link_defconfig | 1 + configs/chromebook_samus_defconfig | 2 +- configs/chromebook_samus_tpl_defconfig | 81 +++ doc/README.x86 | 16 + drivers/core/ofnode.c | 2 +- drivers/misc/cros_ec.c | 2 +- drivers/pci/pci_rom.c | 2 +- drivers/sysreset/sysreset_x86.c | 104 +++- include/configs/chromebook_link.h | 3 - include/configs/chromebook_samus.h | 3 + include/configs/qemu-x86.h | 3 - include/configs/x86-common.h | 1 - include/pch.h | 18 + include/pci.h | 6 +- scripts/Makefile.spl | 24 +- tools/binman/README | 7 + tools/binman/bsection.py | 9 +- tools/binman/control.py | 4 +- tools/binman/etype/section.py | 3 +- tools/binman/etype/text.py | 4 +- tools/binman/etype/vblock.py | 1 + tools/binman/ftest.py | 44 +- tools/binman/test/101_sections_offset.dts | 35 ++ 65 files changed, 2066 insertions(+), 980 deletions(-) create mode 100644 arch/x86/cpu/broadwell/cpu_from_spl.c create mode 100644 arch/x86/cpu/broadwell/cpu_full.c create mode 100644 arch/x86/cpu/intel_common/cpu_from_spl.c create mode 100644 arch/x86/cpu/start_from_spl.S create mode 100644 arch/x86/cpu/start_from_tpl.S create mode 100644 arch/x86/include/asm/handoff.h create mode 100644 arch/x86/lib/tpl.c create mode 100644 configs/chromebook_samus_tpl_defconfig create mode 100644 tools/binman/test/101_sections_offset.dts