On 01/17/2018 07:36 PM, Jaehoon Chung wrote:
When power is off, clock is not disabling. Because it's passed to 1, mmc->clock should be set to f_min value. Some drivers can't initialize the eMMC/SD card with current status.
This patch is to fix the disabling clock value to 0.
Fixes: 2e7410d76ad1 ("mmc: disable the mmc clock during power off")
Signed-off-by: Jaehoon Chung jh80.chung@samsung.com
Applied to u-boot-mmc. Thanks.
Best Regards, Jaehoon Chung
drivers/mmc/mmc.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 53c819187e..311f51f237 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -1501,11 +1501,13 @@ static int mmc_set_ios(struct mmc *mmc)
int mmc_set_clock(struct mmc *mmc, uint clock, bool disable) {
- if (clock > mmc->cfg->f_max)
clock = mmc->cfg->f_max;
- if (!disable && clock != 0) {
if (clock > mmc->cfg->f_max)clock = mmc->cfg->f_max;
- if (clock < mmc->cfg->f_min)
clock = mmc->cfg->f_min;
if (clock < mmc->cfg->f_min)clock = mmc->cfg->f_min;}
mmc->clock = clock; mmc->clk_disable = disable;
@@ -2449,7 +2451,7 @@ static int mmc_power_on(struct mmc *mmc)
static int mmc_power_off(struct mmc *mmc) {
- mmc_set_clock(mmc, 1, true);
- mmc_set_clock(mmc, 0, true);
#if CONFIG_IS_ENABLED(DM_MMC) && CONFIG_IS_ENABLED(DM_REGULATOR) if (mmc->vmmc_supply) { int ret = regulator_set_enable(mmc->vmmc_supply, false);