Add support for SEIKO 4.3'' WVGA panel on mx53loco.
By default, the CLAA WVGA panel is selected.
In order to support the SEIKO panel, undef CONFIG_CLAA_WVGA and define CONFIG_SEIKO_WVGA in mx53loco.h.
Signed-off-by: Fabio Estevam fabio.estevam@freescale.com --- board/freescale/mx53loco/mx53loco.c | 26 +++++++++++++++++++++++++- include/configs/mx53loco.h | 1 + 2 files changed, 26 insertions(+), 1 deletion(-)
diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index a11e883..5709c97 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -412,6 +412,7 @@ static void clock_1GHz(void) printf("CPU: Switch DDR clock to 400MHz failed\n"); }
+#if defined(CONFIG_CLAA_WVGA) static struct fb_videomode const claa_wvga = { .name = "CLAA07LC0ACW", .refresh = 57, @@ -427,6 +428,24 @@ static struct fb_videomode const claa_wvga = { .sync = 0, .vmode = FB_VMODE_NONINTERLACED }; +#endif + +#if defined(CONFIG_SEIKO_WVGA) +static struct fb_videomode const seiko43wvga = { + .name = "Seiko-43WVF1G", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = 29851, /* picosecond (33.5 MHz) */ + .left_margin = 89, + .right_margin = 164, + .upper_margin = 23, + .lower_margin = 10, + .hsync_len = 10, + .vsync_len = 10, + .sync = 0, +}; +#endif
void lcd_iomux(void) { @@ -470,7 +489,12 @@ void lcd_iomux(void)
void lcd_enable(void) { - int ret = ipuv3_fb_init(&claa_wvga, 0, IPU_PIX_FMT_RGB565); + int ret; +#if defined(CONFIG_CLAA_WVGA) + ret = ipuv3_fb_init(&claa_wvga, 0, IPU_PIX_FMT_RGB565); +#elif defined(CONFIG_SEIKO_WVGA) + ret = ipuv3_fb_init(&seiko43wvga, 0, IPU_PIX_FMT_RGB24); +#endif if (ret) printf("LCD cannot be configured: %d\n", ret); } diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 0658dd3..e60b155 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -222,5 +222,6 @@ #define CONFIG_BMP_16BPP #define CONFIG_VIDEO_LOGO #define CONFIG_IPUV3_CLK 200000000 +#define CONFIG_CLAA_WVGA
#endif /* __CONFIG_H */